Classical Bit

  • Items 1 - 24 of 68
  • Page:
    1. 1
    2. 2
    3. 3
  1. Rockler Classic Roman Ogee Router Bits - 1/2" Shank

    Rockler Classic Roman Ogee Router Bits - 1/2" Shank

    …balance that makes it all the more versatile. A simple cove with a matching bead, nothing more, nothing less. The bit is available in several radiuses, all including a ball-bearing guide to eliminate burning. Sturdy 1/2" shanks stabilize the bit during the cut for the finest possible finish.

    2 Review(s)
    From: $39.99
  2. Freud® Quadra-Cut™ Cove and Bead Router Bits - 1/2" Shank

    Freud® Quadra-Cut™ Cove and Bead Router Bits - 1/2" Shank

    A lower cove paired with an upper bead combine to give you a classic design that's perfect for decorative edging on cabinets, molding and furniture. In addition, Freud's exclusive Quadra-Cut™ 4 cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even…

    13 Review(s)
    From: $40.47
  3. Rockler Classic Cove Router Bits - 1/2" Shank

    Rockler Classic Cove Router Bits - 1/2" Shank

    Our Classic Cove Router Bits feature a small step on either side of a basic cove, adding a bit of definition to an otherwise graceful curve. The bits are available in several radiuses, each with a guide bearing. If desired, a separate larger bearing can be installed to achieve a basic cove. Sturdy…

    0 Review(s)
    From: $39.99
  4. Freud® 38-612 Quadra-Cut™ Classical Cove & Round Router Bit - 1-3/8" Dia x 1/2" H x 1/2" Shank

    Freud® 38-612 Quadra-Cut™ Classical Cove & Round Router Bit - 1-3/8" Dia x 1/2" H x 1/2" Shank

    This bit routs a classic edge profile for cabinets, furniture, plaques, and millwork. Freud's exclusive Quadra-Cut™ 4-cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Two large cutters shear upward…

    $54.97
  5. Rockler Classic Fluted Plunge Router Bits

    Rockler Classic Fluted Plunge Router Bits

    An upper ball bearing guide allows you to use this decorative plunge bit for template routing in the middle of a workpiece, or you can mount it in a table for edge treatments. Pairs a cove with a round over for an attractive finished look.

    3 Review(s)
    From: $37.99
  6. Rockler Classic Ogee Router Bits - 1/2" Shank

    Rockler Classic Ogee Router Bits - 1/2" Shank

    The symmetry of this edge profile exhibits a pleasing balance. A simple cove with a matching round over, nothing more, nothing less. The bit is available in several radiuses, all including a ball-bearing guide to eliminate burning. Sturdy 1/2" shanks—the best choice for the smoothest cut and…

    From: $32.99
  7. Rockler Miniature Classic Router Bit - 1/2" Dia x 3/8" H x 1/2" Shank

    Rockler Miniature Classic Router Bit - 1/2" Dia x 3/8" H x 1/2" Shank

    You can use this unique bit for cutting decorative flutes or routing letters on signs. With its wave-shaped profile, you'll get a more ornate look than with typical router bits. Alternatively, the bit can be used in the router table to apply an ogee-like edge to table tops and other parts. Scaled…

    $19.99
  8. Rockler Classical Roman Ogee Plunge Router Bits - 1/2" Shank

    Rockler Classical Roman Ogee Plunge Router Bits - 1/2" Shank

    Our Roman Ogee Plunge Bit can be used for any fluting application, and even for routing sign text, but it is perhaps most often used to create a panel door effect for painted MDF and solid wood. Roman Ogee in essence, the profile's radiused bottom gives a positive-negative effect to the cut shape of…

    1 Review(s)
    From: $23.99
  9. Rockler Classic Roman Ogee Router Bits - 1/4" Shank

    Rockler Classic Roman Ogee Router Bits - 1/4" Shank

    The symmetry of this edge profile exhibits a balance that is pleasing to the eye. A simple cove with a matching bead, nothing more, nothing less. The bit is available in several radiuses, all including a ball-bearing guide to eliminate burning. 1/4" shank.

    2 Review(s)
    From: $39.99
  10. Freud® 99-005 Classical Roman Ogee Router Bit - 1-1/2" Dia x 21/32" H x 1/2" Shank

    Freud® 99-005 Classical Roman Ogee Router Bit - 1-1/2" Dia x 21/32" H x 1/2" Shank

    Add a classic design touch to cabinets, furniture, plaques, and millwork with this decorative ogee bit. It features a small step at the top, adding a bit of definition to the graceful ogee curve. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted…

    $44.97
  11. Rockler Classical Edge Bead Router Bit - 1-3/8" Dia x 3/8" H x 1/2" Shank

    Rockler Classical Edge Bead Router Bit - 1-3/8" Dia x 3/8" H x 1/2" Shank

    With its graceful, elongated round over accented by a small bead, the profile on this edge forming bit looks at home on a wide variety of cabinetry styles. The 3/8" guide bearing makes setups fool-proof, and the 1/2" shank with high-grade carbide leaves a smooth, chatter-free cut.

    $45.99
  12. Freud® 99-011 Quadra-Cut™ Table Top Classical Bold Router Bit - 1-5/8" Dia x 5/8" H x 1/2" Shank

    Freud® 99-011 Quadra-Cut™ Table Top Classical Bold Router Bit - 1-5/8" Dia x 5/8" H x 1/2" Shank

    The table top classical bold bit is designed with sharp curves to generate a strong, uplifting edge for table tops and other edge profiles. It is generously dimensioned with a large 25/64" roundover radius and a smaller 11/64" cove radius to create a bold effect on furniture of all types. It…

    $67.47
  13. Rockler Classic Multi-Form Router Bit - 1-1/4" Dia x 1" H x 1/2" Shank

    Rockler Classic Multi-Form Router Bit - 1-1/4" Dia x 1" H x 1/2" Shank

    This classic multi-form router bit enables you to make a wide variety of different profiles, including beads, coves and quarter rounds, with a single multi-purpose bit. Just adjust the cutter height and the fence position, and with two or more passes, the profile possibilities are almost unlimited.…

    2 Review(s)
    $52.99
  14. Rockler Classic Ogee Router Bit - 1-1/2" Dia x 11/16" H x 1/4" Shank

    Rockler Classic Ogee Router Bit - 1-1/2" Dia x 11/16" H x 1/4" Shank

    The symmetry of this edge profile exhibits a pleasing balance. A simple cove with a matching round over, nothing more, nothing less. Features a ball-bearing guide to eliminate burning. 1/4" shank.

    $39.99
  15. Rockler Classical Stile and Rail Router Bit - 1-3/8" Dia x 1" H x 1/2" Shank

    Rockler Classical Stile and Rail Router Bit - 1-3/8" Dia x 1" H x 1/2" Shank

    Use this rail and stile router bit set to create beautiful door frames for glass panel, flat panel and raised panel doors. Rockler rail and stile bit sets are manufactured to exacting standards and create perfectly matched cope and stick joints. The one-piece cutting edge allows you to achieve a…

    4 Review(s)
    $99.99
  16. Rockler Miniature Classic Roman Ogee Router Bit - 13/16" Dia x 3/8" H x 1/4" Shank

    Rockler Miniature Classic Roman Ogee Router Bit - 13/16" Dia x 3/8" H x 1/4" Shank

    Don't let ordinary router profiles overwhelm your more subtle projects. Rockler's miniature router Bits are the finest available for use in creating jewelry boxes, humidors, and other small boxes and crafts. This one features an attractive dual radius with the option of creating a shoulder on the…

    $19.99
  17. Freud # 38-362 Quadra-Cut Classical Cove & Bead Bit, 1-1/2" Dia. x 5/8" H x 1/2" Sh.

    Freud # 38-362 Quadra-Cut Classical Cove & Bead Bit, 1-1/2" Dia. x 5/8" H x 1/2" Sh.

    …materials. Application: Decorative edging for cabinets, molding and furniture* Add distinctive design to cabinets, furniture, plaques, and millwork with these decorative edging bits. * Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and table-mounted routers.

    $46.97
  18. Freud® 38-504 Quadra-Cut™ Classical Cove & Round Router Bit - 1-1/2" Dia x 11/16" H x 1/4" Shank

    Freud® 38-504 Quadra-Cut™ Classical Cove & Round Router Bit - 1-1/2" Dia x 11/16" H x 1/4" Shank

    …materials. Application: Decorative edging for cabinets,molding and furniture. * Add distinctive design to cabinets, furniture, plaques, and millwork with these decorative edging bits. * Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and table-mounted routers

    $47.97
  19. Rockler Classical Reversible Rail & Stile Router Bit - 1-5/8" Dia x 15/16" H x 1/2" Shank

    Rockler Classical Reversible Rail & Stile Router Bit - 1-5/8" Dia x 15/16" H x 1/2" Shank

    …joints. One bit cuts both rail and stile profiles; just remove the cutters and rearrange them to go from coping rail ends to routing grooves in the stiles. Because the bit is bearing-guided, you can also rout arched rails without a template or fence. Available in Chamfer, Ogee and Classical styles…

    1 Review(s)
    $69.99
  20. Rockler Classical Miniature Roman Ogee Plunge Router Bit - 3/4" Dia x 7/16" H x 1/2" Shank

    Rockler Classical Miniature Roman Ogee Plunge Router Bit - 3/4" Dia x 7/16" H x 1/2" Shank

    Based on a miniature Roman ogee design, this profile can be used in successive cuts, then ripped down for astragals, in series for decorative fluting patterns, or in single cuts for a flat bottom trench with profiled sides. 3/4" diameter with a sturdy, vibration-free 1/2" shank.

    1 Review(s)
    $26.99
  21. Americana Classic Pen Bushing Set

    Americana Classic Pen Bushing Set

    …leaving a bit of extra material to allow for sanding. * The Americana Classic Bushing Set is made of steelhard enough for excellent durability, yet soft enough to prevent damage to your turning tools.* 2-piece bushing set.* Bushings are designed to work with Americana Classic Twist Pen Hardware…

    $4.99
  22. Router Bit Set-Up Jigs-Rail-and-Style Bits

    Router Bit Set-Up Jigs-Rail-and-Style Bits

    Set your router bit to the precise height every time! Simply bring the router bit up through the table and align the jig with the cutting edge of the bit.. This system is ideal for making accurate rail-and-stile construction, lock miter joints and more. All jigs are manufactured for 3/4" stock. They…

    $7.69
  23. Americana Classic Twist Pen Hardware Kit

    Americana Classic Twist Pen Hardware Kit

    …finish with a black accent band at the tip. Includes pen hardware kit and replaceable ballpoint refill. Turning Accessories Needed: Turning Blank (Sold Separately) Pen Turning Mandrel (Sold Separately) Americana Classic Pen Bushing Set (#47296 Sold Separately) 9mm Drill Bit (#23508 Sold Separately)

    $6.99
  24. Dowelmax Replacement Drill Bit and Collar

    Dowelmax Replacement Drill Bit and Collar

    A replacement 3/8" drill bit and collar for the Dowelmax Classic and Dowelmax Jr. doweling jigs.

    $16.50
  • Items 1 - 24 of 68
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X