Clips

  • Items 1 - 24 of 156
  • Page:
    1. 1
    2. 2
    3. 3
  1. Low-Profile Steel Clipboard Clip, Brass Finish

    Low-Profile Steel Clipboard Clip, Brass Finish

    A handy, easy-to-install low-profile brass clipboard clip. Technical Details:* 4" wide* Brass Plated Steel* Wide serrated edge on clip keeps paper securely in place* Low-profile, unobtrusive design* Supplied with two #5 x 1/2" round head screws

    0 Review(s)
    $8.39
  2. 2'' Z-Clips - Pack of 10 Sets

    2'' Z-Clips - Pack of 10 Sets

    …wall with easy-to-use Z-shaped, aluminum clips! The clips provide a secure mount for wall panels, partitions, frames, cabinets, and more. Once installed, clips wedge together to lock panels in place. To disengage panels, simply lift and remove! Each clip measures 1-1/4" H x 2" wide with .20" punched…

    $16.99
  3. Rev-A-Shelf Wood Storage Trays with Adjustable Rail System (4231 Series)-Single Wood Storage Trays

    Rev-A-Shelf Wood Storage Trays with Adjustable Rail System (4231 Series)-Single Wood Storage Trays

    …The storage trays are easy to install with screw-in clips for standard doors or pegboard clips for Rev-A-Shelf stainless steel hanging panels. For maximum versatility, mount the trays to 26" or 58" Adjustable Rail Standards with standard clips (sold separately). Technical Details:* Durable wood…

    From: $24.99
  4. Blum® Restrictor Clip

    Blum® Restrictor Clip

    …these Restrictor Clips limit the opening angle of the door from 105 degrees to 86 degrees - ideal for corner cabinets, adjacent cabinets whose doors open against one another, or any other cabinet where obstacles near the door would be damaged by the knob during opening. Simply clip it on and put an…

    $5.99
  5. RapidAir Compressed Air Nylon Tubing

    RapidAir Compressed Air Nylon Tubing

    …Nylon tubing is corrosion proof and resists abrasions Best Used With: Air Manifold Kit . Add additional lines to your existing system. (# 42910) Nylon Tubing. Non-corrosive tubing to expand your line. (# 42914) Pack of 12 Tubing Clips . Use to attach your nylon line to walls or ceilings. (# 42921)

    $59.49
  6. RapidAir Compressed Air Master Kit

    RapidAir Compressed Air Master Kit

    …your compressor in a sound-insulated room Best Used With: Air Outlet Kit. Add to your compressed air line with additional outlets. (# 42909) Nylon Tubing. Non-corrosive tubing to expand your line. (# 42914) Pack of 12 Tubing Clips . Use to attach your nylon line to walls or ceilings. (# 42921)

    4 Review(s)
    $139.99
  7. Plateau Pen Hardware Kit - Satin Nickel

    Plateau Pen Hardware Kit - Satin Nickel

    …class to your desk display or your pen collection with the executive look of this Plateau Pen Hardware Kit. Classy bushing accents and a teardrop clip end will nicely complement the blanks you choose to make the pen. Turning Accessories Needed: Turning Blank (Sold Separately) Pen Turning Mandrel…

    $4.69
  8. Traditional Steel Clipboard Clip, Nickel Finish

    Traditional Steel Clipboard Clip, Nickel Finish

    A handy, easy-to-install clip used for easels or common clipboards. Technical Details:* 6" wide* Nickel plated steel* Heavy springs help keep paper securely under clip* Large 1/2" diameter hole in center of clip bar for hanging clipboard in convenient location* Supplied with two #5 x 1/2" round head…

    3 Review(s)
    $3.79
  9. Glass Door Retainer Clips Kit

    Glass Door Retainer Clips Kit

    …included inserts to obtain three different offsets: 1/8", 3/16" and 1/4". Whether for those glass panel doors you've been building or for that old china cabinet with the rattling glass, these are the perfect solution for holding the glass securely. Each pack contains eight glass clips, plus inserts.

    1 Review(s)
    $5.99
  10. Glass Retainer Clips, Pack of 8

    Glass Retainer Clips, Pack of 8

    …push the glass securely against the frame. Both clip and tips can be flipped over for a variety of different offsets ranging from flush to 1/2" setback (measuring from back of glass to surface of surrounding frame). Each package includes eight clips, eight long rubber tips, eight short rubber tips…

    20 Review(s)
    From: $4.99
  11. DeWalt 12V Cordless LED Worklight

    DeWalt 12V Cordless LED Worklight

    A three-pronged approach to positioning makes it easy to put this worklight just about anywhere. The belt clip makes it easy to hang, the magnet allows it to cling to electrical boxes and metal studs, and the kickstand allows you to set it on any flat surface. Head rotates 360 degrees and pivots to…

    $39.00
  12. Table Top Fasteners

    Table Top Fasteners

    …prevents cracks from forming over time. The table clips slip neatly into a groove in the apron and attach to the tabletop with a single screw-simple, efficient and strong. Heavy gauge steel ensures a sturdy connection. Technical Details: * Table top clips are made of extra heavy #A gauge cold rolled…

    28 Review(s)
    $2.99
  13. Kreg Toolboxx™

    Kreg Toolboxx™

    …to 1-1/2" long. (See below for complete contents.)* Overall dimensions of the Kreg Toolbox are 12"D x 22-1/4"W x 6-5/8"H.* Opening the two sturdy clips provides quick access to both the top and bottom tray.* Top tray swings completely out of the way, providing total access to the bottom storage…

    1 Review(s)
    $79.99
  14. Keyless Cam Locks-Locks

    Keyless Cam Locks-Locks

    …lock) with a paper clip while setting a new combination. With the combo set at 0 0 0 turn the threaded cylinder while keeping the front housing and cam stationary.* Set the combination to the number that opens the lock.* Release pressure on the change button by removing paper clip. It is that easy!

    1 Review(s)
    From: $17.99
  15. EB-TY® Hidden Deck Fastening System

    EB-TY® Hidden Deck Fastening System

    …boards (where they cross the joist) with a biscuit joiner, apply a thin bead of adhesive to the top of the joists, and install the EB-TY® 'clip.' The clip is then screwed in at a 45° angle using the Swaneze stainless steel screws (included). EB-TY® Hidden Deck Fastening System is highly…

    $152.29
  16. Porter-Cable 3-1/2'' Clipped-Head Framing Nailer Kit

    Porter-Cable 3-1/2'' Clipped-Head Framing Nailer Kit

    Weighing in at only 7.3 pounds, and capable of driving nails up to 3-1/2" long, the Porter-Cable FC350B is a lightweight framing nailer with a powerful punch. With tool-free adjustable depth-of-drive, it's easy to dial in the proper set for your nail heads, and the selectable trigger features…

    $215.99
  17. Tray Divider

    Tray Divider

    …with this durable divider made of 1/4" heavy-duty steel wire. White epoxy coated for quick wipe-down cleaning. Package includes one divider, 4 nylon fastening clips and screws. Use included screws and fastening clips to fasten in place. Clips require 7/8" clearance for mounting. 12-1/4" x 19-3/4".

    5 Review(s)
    $15.99
  18. Trim Clip Miter Clip

    Trim Clip Miter Clip

    Clamping miters couldn't get much easier than with the Miter Clip. Just position the Miter Clip and squeeze-the reverse cam mechanism applies pressure and holds the miter clamp firmly shut, while the notch keeps the tips of the miters neatly aligned. Once clamped, you can also rotate the clamp…

    1 Review(s)
    $16.99
  19. Glue Pouch

    Glue Pouch

    …our accessory Clip Rails until your next glue up. Technical Details:* Fits Rockler 8 and 16 oz glue bottles.* Made of durable polyester fabric.* Steel belt clip for mounting on a belt or onto the 8-inch or 16-inch Clip Rails (46079 and 43875, sold separately).* In addition to the clip, there is also…

    $6.99
  20. Power Air Respirator

    Power Air Respirator

    …* Lightweight face piece is made of soft medical class silicone and fits comfortably.* With easy-adjust headband.* Convenient battery pack clips on belt and has high/low adjustment.* Comes with dust cartridge and 10 fiber pre-filters (both also sold separately).* Powered by 4 AA batteries…

    23 Review(s)
    $74.99
  21. Plastic T-Molding Edging-3/4" Wide x 12' Long

    Plastic T-Molding Edging-3/4" Wide x 12' Long

    …molding requires a 1/16" kerf. 13/16" molding requires a 5/64" kerf. Wraps around a radius as small as 1-1/2". To fit a 90 degree corner, just clip the ribbing that fits the groove.Available in four different colors;Black, Brown, White, and Tan. The 3/4" T-moulding has two ribs. The 13/16"…

    23 Review(s)
    $17.99
  22. Marking Tool for Right Angle Button-Fix Panel Couplers

    Marking Tool for Right Angle Button-Fix Panel Couplers

    …Panel Couplers (48503, sold separately), allowing you to mark out corresponding screw holes without the need to fumble with a tape measure. Simply clip the marking tools into the double holes on the sockets, the sockets onto the buttons, position your panel, and press down. Much like dowel centers,…

    $4.99
  23. Festool CXS Li-Ion Cordless Drill Package

    Festool CXS Li-Ion Cordless Drill Package

    …Onboard driver bit stowage keeps you from searching for misplaced bits* Variable speed trigger enables finesse for delicate screws* Integrated belt clip keeps your CXS handy when you need both hands for other tasks* Weighs 1.98 lbs.* The T-Loc Systainer stores the drill and organizes all your…

    $295.00
  24. FastCap SpeedClip Tape Measure Holder

    FastCap SpeedClip Tape Measure Holder

    …a carpenter who was tired of having his pants ripped from repeatedly pulling off his tape measure! The problem is solved by SpeedClip, which easily clips on over your pants or belt, and allows you to quickly and easily remove and re-clip your tape measure all day long. SpeedClip even holds a pencil,…

    6 Review(s)
    $1.99
  • Items 1 - 24 of 156
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X