Cnc Accessories

  • Items 1 - 24 of 71
  • Page:
    1. 1
    2. 2
    3. 3
  1. End Mill Bits for CNC Carving Machines-Click-N-Carve Bits

    End Mill Bits for CNC Carving Machines-Click-N-Carve Bits

    …possible cut. NOTE: These bits can be used on any CNC router (including Shark models) or handheld router with a 1/4" collet when you also purchase the 1/4" to 4mm Collet Reducer (48789 - Sold Separately). Technical Details:* Solid Tungsten Carbide CNC router bit.* 4mm shank is designed to fit the…

  2. Half-Conical Bits for CNC Carving Machines-Click-N-Carve Bits

    Half-Conical Bits for CNC Carving Machines-Click-N-Carve Bits

    …carvings, engravings, and lithophanes. The 4mm shank fits both Click-N-Carve CNC models (49449 and 49490, sold separately). Solid carbide for along life and the cleanest possible cut. NOTE: These bits can be used on any CNC router (including Shark models) or handheld router with a 1/4" collet when…

    0 Review(s)
    $39.99
  3. Brown Acrylic Sheets 10-Packs for CNC Lithophanes

    Brown Acrylic Sheets 10-Packs for CNC Lithophanes

    …on a sepia tone when backlit. They are sold in packs of ten, and can be used with either the BE3030, or the BE2015 Click-N-Carve CNC Carving Machines. Most other CNC machines will accept both sizes, but check the capacity on your machine. A lithophane is an etched or carved piece of artwork on thin…

    $29.99 $14.99

    SAVE 50%

  4. CNC Shark Touch Plate

    CNC Shark Touch Plate

    Touch Plate is compatible with the following machines:* CNC Shark Routing System* CNC Shark Pro Plus Routing System* CNC Shark HD 2.0 Routing System Technical Details:* To use the CNC Shark Touch Plate, plug one end into the controller, attach the magnet to the collet, and lower the router bit onto…

    1 Review(s)
    $89.99
  5. CNC Shark® Touch Probe

    CNC Shark® Touch Probe

    …* CNC Shark Routing System * CNC Shark Pro Plus Routing System * CNC Shark HD 2.0 Routing System Introducing CNCSharkTalk.com, a new website presented by Rockler where CNC Shark® users can chat together, watch how-to videos, ask questions, learn from each other and even show off their CNC Shark…

    3 Review(s)
    $299.99
  6. Rockler CNC Table

    Rockler CNC Table

    …paint.* Optional casters can be mounted in place of the adjustable feet (47034, sold separately). CNC Controller Bracket:* Compatible with controllers for CNC Shark routers.* Inside width of CNC Controller Bracket is 11-3/4".* Inside height is 5-1/2", which leaves space for the controller…

    $249.99
  7. Cut-3D Software for CNC Shark®

    Cut-3D Software for CNC Shark®

    …Software is compatible with the following machines:* CNC Shark Routing System* CNC Shark Pro Plus Routing System* CNC Shark HD 2.0 Routing System Introducing CNCSharkTalk.com, a new website presented by Rockler where CNC Shark® and CNC Shark® Pro users can chat together, watch how-to videos,…

    1 Review(s)
    $314.99
  8. White Acrylic Sheets for CNC Lithophanes

    White Acrylic Sheets for CNC Lithophanes

    …available in two sizes. The 11.8" x 7.9" sheets are for use with the BE3030 Click-N-Carve CNC Carving Machine, while the 7.32" x 5.31" sheets can be used with either the BE3030, or the BE2015. Most other CNC machines will accept both sizes, but check the capacity on your machine. If your carving…

    $29.99
  9. Freud Single Flute Straight Router Bits

    Freud Single Flute Straight Router Bits

    …them on CNC and other automatic routers as well as hand-held and table-mounted portable routers. * This single flute Freud bit was designed for high production work with maximum chip clearance for fast feed rates.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on CNC and…

    From: $11.47
  10. Rockler 28'' x 40'' Table Top

    Rockler 28'' x 40'' Table Top

    …station, or an assembly table. It also works well as a table top for the Shark line of CNC routers. Pair it with your own shop-built base cabinet, or with our 24"W x 36"L Shop Stand (48089, sold separately). Also available from Rockler, the complete Rockler CNC Table w/Stand and Controller Brackets.

    $99.99
  11. Dust Boot for CNC Shark HD 2.0

    Dust Boot for CNC Shark HD 2.0

    …O.D.) fits our clear dust hose (22784, also sold separately). Technical Details:* Designed to work with the CNC Shark HD 2.0 (sold separately) See 43651 if you need a dust boot for the other CNC Shark machines.* Dust Boot measures 4-3/8" x 9-1/4".* Durable polymer construction.* Flexible…

    1 Review(s)
    $89.99
  12. Freud # 90-160 5-Piece Down-Spiral Solid Carbide Router Bit Set

    Freud # 90-160 5-Piece Down-Spiral Solid Carbide Router Bit Set

    …hang on the wall or mount on the bench to keep bits handy and safe.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on CNC and other automatic routers as well as hand-held and tablemounted portable routers.* Features TiCo™ Hi-Density carbide for longer bit life and…

    $159.97
  13. Rockler 5-Piece CNC Router Bit Set

    Rockler 5-Piece CNC Router Bit Set

    Create signs and table tops with decorative edging in almost half the time with this unique 5-Piece CNC Router Bit Set from Rockler. The set includes three innovative dual-purpose bits, which simultaneously cut your parts to size and apply one of three edge profiles: 1/2-inch cove, 45° chamfer…

    $199.99
  14. Dust Boot for CNC Shark

    Dust Boot for CNC Shark

    …also sold separately). Dust Boot is compatible with the following machines:* CNC Shark Routing System* CNC Shark Pro Plus Routing System Technical Details:* Designed to work with all CNC Shark routers except the the CNC Shark HD 2.0 (see 43650 if you need a dust boot for the HD 2.0).* Dust Boot…

    2 Review(s)
    $89.99
  15. Controller Bracket for CNC Shark

    Controller Bracket for CNC Shark

    …Rockler, the complete Rockler CNC Table w/Stand and Controller Brackets. * Ideal for use with our 28" x 40" Blank Top (45996, sold separately), which is theperfect size for CNC Shark routers.* Easy to access for emergency shut-downs.* Inside width of CNC Controller Bracket is…

    $19.99
  16. Conical Ball Bits for CNC Carving Machines-Click-N-Carve Bits

    Conical Ball Bits for CNC Carving Machines-Click-N-Carve Bits

    …edge for superior chip ejection, and the 4mm shank fits both Click-N-Carve CNC models (49449 and 49490, sold separately). Solid carbide for a long life and the cleanest possible cut. NOTE: These bits can be used on any CNC router (including Shark models) or handheld router with a 1/4" collet when…

    0 Review(s)
  17. Tungsten Ball Nose Bits for Click-N-Carve CNC Machines-Click-N-Carve Bits

    Tungsten Ball Nose Bits for Click-N-Carve CNC Machines-Click-N-Carve Bits

    …carvings, engravings, and lithophanes. The 4mm shank fits both Click-N-Carve CNC models (49449 and 49490, sold separately). Solid carbide for a long life and the cleanest possible cut. NOTE: These bits can be used on any CNC router (including Shark models) or handheld router with a 1/4" collet when…

    0 Review(s)
  18. Freud Carbide Up-Spiral Router Bits

    Freud Carbide Up-Spiral Router Bits

    …chip removal with a cut that can't be matched by standard straight bits. Ideal for production settings.* Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods.* Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    1 Review(s)
    From: $51.47
  19. White Acrylic Sheets for CNC Lithophanes-11.8" x 7.9" (For the larger Click-N-Carve Model - BE3030)

    White Acrylic Sheets for CNC Lithophanes-11.8" x 7.9" (For the larger Click-N-Carve Model - BE3030)

    …available in two sizes. The 11.8" x 7.9" sheets are for use with the BE3030 Click-N-Carve CNC Carving Machine, while the 7.32" x 5.31" sheets can be used with either the BE3030, or the BE2015. Most other CNC machines will accept both sizes, but check the capacity on your machine. If your carving…

    From: $39.99
  20. Rockler High Pressure Laminate Router Table, Fence & Plate With FREE 6-Piece Router Accessory Kit

    Rockler High Pressure Laminate Router Table, Fence & Plate With FREE 6-Piece Router Accessory Kit

    …7539; Milwaukee 5625-20; Triton TRA001 and MOF001* Group D routers: Bosch 1619-1619EV; Freud FT2000; DeWalt 625 6 Piece Router Accessory Kit This 6-Piece router table accessory kit includes three plate inserts with various bit openings for minimal clearance capabilities. Also included with each kit…

    1 Review(s)
    $299.98 $249.99

    SAVE 17%

  21. Replacement Silicone Mat for Click-N-Carve CNCs

    Replacement Silicone Mat for Click-N-Carve CNCs

    This is a replacement silicone mat for the BE3030 and BE2015 Click-N-Carve CNC Carving Machines. The mat measures 5-1/2" x 7-1/2", the ideal size for securely holding wood, as well as ABS plastic and acrylic carvings sheets. Technical Details:* Silicone mat measures 5-1/2" x 7-1/2".* Protects the…

    $29.99
  22. 1/4'' to 4 mm Collet Reducer for Click-N-Carve Bits

    1/4'' to 4 mm Collet Reducer for Click-N-Carve Bits

    This unique collet reducer lets you to use the wide array of proprietary Click-N-Carve CNC Router Bits with the larger CNC Shark line of routers, as well as any other CNC router or handheld router with a 1/4" collet. It reduces the collet opening from 1/4" to 4mm to accept the smaller Click-N-Carve…

    $6.99
  23. Ready2Rout Router Table Fence

    Ready2Rout Router Table Fence

    With computer-controlled precision, repeatable fence settings stored in memory, a pre-installed suite of apps, and many more to come, this first-ever electronic router fence ushers the humble router table into the "smart" era. Woodworkers used to endlessly tapping and bumping their fences will…

    2 Review(s)
    $599.99
  24. Extreme Tool Boss Tool Bag

    Extreme Tool Boss Tool Bag

    If you've ever dreaded lugging your hard, heavy tool box out to the jobsite, then you'll love the Extreme Tool Boss Tool Bag from Bucket Boss. With its soft sides and adjustable padded shoulder strap, the Tool Boss won't bang up your knees, and it won't stretch out your arm like a traditional tool…

    $99.99 $44.99

    SAVE 55%

  • Items 1 - 24 of 71
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X