Cnc Bits

  • Items 1 - 24 of 55
  • Page:
    1. 1
    2. 2
    3. 3
  1. Rockler 5-Piece CNC Router Bit Set

    Rockler 5-Piece CNC Router Bit Set

    …set are two signmaking bits - a 60° V-groove bit, and a flattened round nose bit-perfect for routing letters or applying other decorative effects, such as scrolling and borders. All five CNC bits come packaged in an attractive wooden case with designated spots for each bit. 1/2-inch shanks. Cuts…

    $199.99
  2. Quick-Change Musclechuck™

    Quick-Change Musclechuck™

    One router bit change with the Musclechuck™ will have woodworkers wondering why this ingenious chuck wasn't invented along with the router. With just a half-turn of a hex wrench, router bits pop in and out with absolute ease. No more rummaging around for the right wrenches, or skinning your…

    2 Review(s)
    $69.99
  3. Pro Series Log Tenon Cutters

    Pro Series Log Tenon Cutters

    …slots along the shaft combine with radial grooves at 1/2" intervals to let you to see your progress and measure tenon length while you cut. Body is CNC machined from aircraft aluminum for maximum strength and minimum weight. Available in four sizes (1/2", 1", 1-1/2", and 2") corresponding to the…

    0 Review(s)
    From: $109.00
  4. Freud® 90° V Grooving Router Bits - 1/4" Shank

    Freud® 90° V Grooving Router Bits - 1/4" Shank

    …and adding decorative accents to furniture and plaques. Freud's "V" grooving bits are designed to cut deep or shallow 90 degree "V" grooves. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable…

    From: $21.47
  5. Half-Conical Bits for CNC Carving Machines-Click-N-Carve Bits

    Half-Conical Bits for CNC Carving Machines-Click-N-Carve Bits

    …possible cut. NOTE: These bits can be used on any CNC router (including Shark models) or handheld router with a 1/4" collet when you also purchase the 1/4" to 4mm Collet Reducer (48789 - Sold Separately). Technical Details:* Solid Tungsten Carbide CNC router bit.* 4mm shank is designed to fit…

    0 Review(s)
    $39.99
  6. Freud® Up-Spiral Router Bits - 1/4" Shank

    Freud® Up-Spiral Router Bits - 1/4" Shank

    …solid carbide up spiral bits combine effective chip removal with a cut that can’t be matched by standard straight bits. Ideal for production settings.* Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods.* Use on CNC and other automatic routers…

    From: $20.47
  7. Freud® Single Flute Straight Router Bits - 1/4" Shank

    Freud® Single Flute Straight Router Bits - 1/4" Shank

    …channels, such as those for drawer bottoms. The bits cut all composition materials, plywoods, hardwoods and softwoods. Use them on CNC and other automatic routers as well as hand-held and table-mounted portable routers. * This single flute Freud bit was designed for high production work with maximum…

    From: $11.47
  8. CNC Shark Routing System, with New 7.0 Software

    CNC Shark Routing System, with New 7.0 Software

    …exclusions apply FREE CNC Project Plans from Woodworker's Journal:* Butler's Tray* Weather Station* Cribbage Board* Workshop Jig* Modern Table* Outlet Cover* Luggage Tags* Chinese Checkerboard* Puzzle Tray Introducing CNCSharkTalk.com, a website presented by Rockler where CNC Shark users can chat…

    21 Review(s)
    $2,899.99
  9. Freud® 90-150 5-Pc. Up Cut Spiral Router Bit Set

    Freud® 90-150 5-Pc. Up Cut Spiral Router Bit Set

    Bits cut all composite materials, plywoods, hardwoods and softwoods.* Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Up-Cut Spiral Bit (75-101)* Overall Diameter: 3/16"* Carbide Height: 3/4"* Shank Diameter: 1/4"* Overall Length: 2" Up-Cut Spiral Bit

    $159.97
  10. Freud® Round Nose Router Bits - 1/4" Shank

    Freud® Round Nose Router Bits - 1/4" Shank

    …cutting boards. These Round Nose Router Bits cut all composition materials, plywoods, hardwoods, and softwoods allowing you to add a personal touch to cabinet doors, drawer fronts, and fluted millwork, or use these bits to engrave wooden signs. Use on CNC and other automatic routers as well as…

    From: $19.97
  11. Freud® 90-160 5-Pc. Down-Spiral Solid Carbide Router Bit Set

    Freud® 90-160 5-Pc. Down-Spiral Solid Carbide Router Bit Set

    …or mount on the bench to keep bits handy and safe.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on CNC and other automatic routers as well as hand-held and tablemounted portable routers.* Features TiCo™ Hi-Density carbide for longer bit life and a flawless finish.*…

    $159.97
  12. Freud® 60° V Grooving Router Bit - 1/2" Dia x 1/2" H x 1/4" Shank

    Freud® 60° V Grooving Router Bit - 1/2" Dia x 1/2" H x 1/4" Shank

    …and adding decorative accents to furniture and plaques. Freud's "V" grooving bits are designed to cut deep or shallow 60 degree "V" grooves. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable…

    $30.47
  13. Freud® Lock Miter Bits - 1/2'' Shank

    Freud® Lock Miter Bits - 1/2'' Shank

    …board vertically and the piece to be joined horizontally. the Lock Miter Bit cuts thinner panels for projects such as humidors and jewelry boxes. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers, as well as table-mounted portable routers.…

    From: $95.97
  14. CNC Shark Touch Plate

    CNC Shark Touch Plate

    …with the following machines:* CNC Shark Routing System* CNC Shark Pro Plus Routing System* CNC Shark HD 2.0 Routing System Technical Details:* To use the CNC Shark Touch Plate, plug one end into the controller, attach the magnet to the collet, and lower the router bit onto the touch plate.* Durable…

    1 Review(s)
    $89.99
  15. CMT BTS-1 Bowl & Tray Router Bit System Kit- 1-1/4" Dia x 1/2" Shank

    CMT BTS-1 Bowl & Tray Router Bit System Kit- 1-1/4" Dia x 1/2" Shank

    …templates are produced on a CNC router, ensuring perfect curves and straight lines).* Oval template produces 14" wide x 22-1/2" long tray.* Pie-cut template produces 16-3/4" round tray.* 3-1/2" long collet extension accepts 1/2" shank router bits.* Bowl and Tray router bit: 1-1/4" diameter; carbide…

    3 Review(s)
    $112.99
  16. Freud® Down-Spiral Router Bits - 1/4" Shank

    Freud® Down-Spiral Router Bits - 1/4" Shank

    …single-sided veneers and laminates.* Freud's solid carbide down spiral bits are ideal for smooth, chip-free routing where chip removal is not a problem.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on CNC and other automatic routers as well as hand-held and table-mounted…

    From: $19.97
  17. Freud® Double Flute Straight Router Bits - 1/2" Shank

    Freud® Double Flute Straight Router Bits - 1/2" Shank

    …removal with a smooth finish.* Freud straight bits cut smoother than other bits because of the precise shear and hook angles.* End of bit relief allows for fast plunging.* Cuts all composite materials, plywoods, hardwoods, and softwoods.* Use on CNC and other automatic routers as well as hand-held…

    4 Review(s)
    From: $17.97
  18. Freud® Double Flute Straight Router Bits - 1/4" Shank

    Freud® Double Flute Straight Router Bits - 1/4" Shank

    …removal with a smooth finish.* Freud straight bits cut smoother than other bits because of the precise shear and hook angles.* End of bit relief allows for fast plunging.* Cuts all composite materials, plywoods, hardwoods, and softwoods.* Use on CNC and other automatic routers as well as hand-held…

    From: $14.97
  19. Freud® Dovetail Router Bits - 1/4" Shank

    Freud® Dovetail Router Bits - 1/4" Shank

    bits for drawer stock, and the 13/16"H dovetail bits for 3/4" thick carcases. Cut all composition materials, plywoods, hardwoods and softwoods. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers. * Features TiCo™ Hi-Density carbide for longer bit life…

    From: $17.47
  20. Freud® Double Compression Spiral Router Bits - 1/2" Shank

    Freud® Double Compression Spiral Router Bits - 1/2" Shank

    The Freud Double Compression Spiral Bit is the ultimate high-performance straight bit, specially designed to eliminate chipping on both sides of the workpiece. This makes it ideal for pattern routing on double-sided panels, edgework, mortises and more. Solid carbide. 1/2" shank. Application: Fine…

    1 Review(s)
    From: $81.97
  21. Freud® Carbide Up-Spiral Router Bits - 1/2" Shank

    Freud® Carbide Up-Spiral Router Bits - 1/2" Shank

    …Freud's solid carbide up spiral bits combine effective chip removal with a cut that can't be matched by standard straight bits. Ideal for production settings.* Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods.* Use on CNC and other automatic routers as…

    1 Review(s)
    From: $51.47
  22. Freud® Round Nose Router Bits - 1/2" Shank

    Freud® Round Nose Router Bits - 1/2" Shank

    …cutting boards.* Add a personal touch to cabinet doors, drawer fronts, and fluted millwork, or use these bits to engrave wooden signs.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    2 Review(s)
    $34.97 From: $24.79

    SAVE 29%

  23. Freud® Down-Spiral Router Bits - 1/2" Shank

    Freud® Down-Spiral Router Bits - 1/2" Shank

    …veneers and laminates. * Freud's solid carbide down spiral bits are ideal for smooth, chip-free routing where chip removal is not a problem. * Cuts all composition materials, plywoods, hardwoods, and softwoods. * Use on CNC and other automatic routers as well as hand-held and table-mounted…

    3 Review(s)
    From: $50.97
  24. Freud® 70-104 Key Hole Router Bit - 25/64" Dia x 7/16" H x 1/4" Shank

    Freud® 70-104 Key Hole Router Bit - 25/64" Dia x 7/16" H x 1/4" Shank

    …Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. * Features TiCo™ Hi-Density carbide for longer bit life and a flawless finish.* Perma-SHIELD® Non-stick Coating protects from heat, gumming, and corrosion.* Each bit is computer-balanced…

    $18.97
  • Items 1 - 24 of 55
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X