Cnc Machine

  • Items 1 - 24 of 34
  • Page:
    1. 1
    2. 2
  1. CNC Shark HD Version 2.0 Routing System

    CNC Shark HD Version 2.0 Routing System

    …616, 618 FREE CNC Project Plans from Woodworker's Journal:* Butler's Tray* Weather Station* Cribbage Board* Workshop Jig* Modern Table* Outlet Cover* Luggage Tags* Chinese Checkerboard* Puzzle Tray Visit the CNC Shark Forum CNCSharkTalk.com, a website presented by Rockler where CNC Shark users can…

    3 Review(s)
    $3,999.99
  2. CNC Shark Routing System, with New 7.0 Software

    CNC Shark Routing System, with New 7.0 Software

    With a table measuring 15-3/4" x 31-1/2", the CNC Shark is ideally suited for carvings and machining operations on a large variety of signs, doors and other small projects. It boasts impressive power, speed, accuracy, and ease of use. With its robust steel and high-density poly-ethylene…

    21 Review(s)
    $2,899.99
  3. CNC Shark Pro Plus

    CNC Shark Pro Plus

    …it can take accidental impacts that would normally damage or destroy an aluminum or MDF machine. It is fully compatible with the Bosch Colt Palm Router and includes a 3/8" diameter V-groove router bit. The CNC Shark also includes VCarve Pro 7 and Cut3D design software a $900 value. You supply a PC…

    15 Review(s)
    $3,799.99
  4. Rockler Pro Phenolic Router Table, Fence, Plate & Stand

    Rockler Pro Phenolic Router Table, Fence, Plate & Stand

    …melamine MDF faces, front- and rear-facing accessory T-tracks and an included dust port and bit guard.* 8-1/4" x 11-3/4" x 1/4" aluminum plate is CNC machined for incredible flatness and precision.* Featuring 8-points of plate leveling and 2 locking points.* 24" x 32" table for over five square feet…

    $499.99 $399.99

    SAVE 20%

  5. Cut-3D Software for CNC Shark®

    Cut-3D Software for CNC Shark®

    …Cut 3-D Software is compatible with the following machines:* CNC Shark Routing System* CNC Shark Pro Plus Routing System* CNC Shark HD 2.0 Routing System Introducing CNCSharkTalk.com, a new website presented by Rockler where CNC Shark® and CNC Shark® Pro users can chat together, watch how-to…

    1 Review(s)
    $314.99
  6. CNC Shark® Touch Probe

    CNC Shark® Touch Probe

    …used with the CNC Shark models. Made in the USA. NOTE: To avoid accidents or injury, always be sure to unplug the router prior to attaching the Touch Probe. Touch Probe is compatible with the following machines: * CNC Shark Routing System * CNC Shark Pro Plus Routing System * CNC Shark HD 2.0…

    3 Review(s)
    $299.99
  7. CNC Shark Touch Plate

    CNC Shark Touch Plate

    Touch Plate is compatible with the following machines:* CNC Shark Routing System* CNC Shark Pro Plus Routing System* CNC Shark HD 2.0 Routing System Technical Details:* To use the CNC Shark Touch Plate, plug one end into the controller, attach the magnet to the collet, and lower the router bit onto…

    1 Review(s)
    $89.99
  8. Rockler CNC Table

    Rockler CNC Table

    …paint.* Optional casters can be mounted in place of the adjustable feet (47034, sold separately). CNC Controller Bracket:* Compatible with controllers for CNC Shark routers.* Inside width of CNC Controller Bracket is 11-3/4".* Inside height is 5-1/2", which leaves space for the controller…

    $249.99
  9. Rockler 5-Piece CNC Router Bit Set

    Rockler 5-Piece CNC Router Bit Set

    …unique 5-Piece CNC Router Bit Set from Rockler. The set includes three innovative dual-purpose bits, which simultaneously cut your parts to size and apply one of three edge profiles: 1/2-inch cove, 45° chamfer or 1/2-inch roundover. There's no need to remove the parts to machine them again on a…

    $199.99
  10. Jet Live Center MT-2, 708331

    Jet Live Center MT-2, 708331

    …Live Center MT-2, 708331. Ideal for use on your wood lathe allowing for center variations so it won't damage your work piece. Technical Details:* Delivers greater turning speeds* Ideal for a CNC lathe or general machining operations* Adjusts for center variations so it won't damage your workpiece

    $19.99
  11. Dust Boot for CNC Shark

    Dust Boot for CNC Shark

    …(22784, also sold separately). Dust Boot is compatible with the following machines:* CNC Shark Routing System* CNC Shark Pro Plus Routing System Technical Details:* Designed to work with all CNC Shark routers except the the CNC Shark HD 2.0 (see 43650 if you need a dust boot for the HD 2.0).* Dust…

    2 Review(s)
    $89.99
  12. Rockler Router Table Plates

    Rockler Router Table Plates

    …1-1/2" bit opening. Optional inserts sold separately. Plates A and B use Standard Opening inserts. Plates C and D use Large Opening inserts.* CNC machining for a dead-flat routing surface where it counts the most – right next to the bit.* Each heavy-duty aluminum router plate includes an…

    8 Review(s)
    $59.99
  13. Brown Acrylic Sheets 10-Packs for CNC Lithophanes

    Brown Acrylic Sheets 10-Packs for CNC Lithophanes

    …are sold in packs of ten, and can be used with either the BE3030, or the BE2015 Click-N-Carve CNC Carving Machines. Most other CNC machines will accept both sizes, but check the capacity on your machine. A lithophane is an etched or carved piece of artwork on thin acrylic that can only be seen…

    $29.99
  14. Pro Series Log Tenon Cutters

    Pro Series Log Tenon Cutters

    …along the shaft combine with radial grooves at 1/2" intervals to let you to see your progress and measure tenon length while you cut. Body is CNC machined from aircraft aluminum for maximum strength and minimum weight. Available in four sizes (1/2", 1", 1-1/2", and 2") corresponding to the diameter…

    0 Review(s)
    From: $109.00
  15. Industrial Series Log Tenon Cutters

    Industrial Series Log Tenon Cutters

    …along the shaft combine with radial grooves at 1/2" intervals to let you to see your progress and measure tenon length while you cut. Body is CNC machined from aircraft aluminum for maximum strength and minimum weight. Available in three sizes (1", 1-1/2", and 2") corresponding to the diameter tenon…

    2 Review(s)
    From: $259.00
  16. 4212 Porter-Cable  12'' Dovetail Jig

    4212 Porter-Cable 12'' Dovetail Jig

    …and box template, dovetail bit, straight bit, two template guides, two lock nuts and T-handle hex wrench.* Heavy-duty cam-type clamps with sandpaper-backed locking bars provide solid grip of wood.* CNC machined aluminum templates provide superior accuracy.* For use with routers with 1/2 collet.

    $187.99
  17. Rockler High Pressure Laminate Router Table, Fence, Plate, & Stand

    Rockler High Pressure Laminate Router Table, Fence, Plate, & Stand

    …an adjustable bit guard and 2-1/2" dust port. Package includes a 18"D x 26"W x 32"H steel stand.* 8-1/4" x 11-3/4" x 1/4" aluminum plate is CNC machined for incredible flatness and precision.* Featuring 8-points of plate leveling and 2 locking points.* 24" x 32" table for over five square feet…

    3 Review(s)
    $349.99
  18. Dust Boot for CNC Shark HD 2.0

    Dust Boot for CNC Shark HD 2.0

    …our clear dust hose (22784, also sold separately). Technical Details:* Designed to work with the CNC Shark HD 2.0 (sold separately) See 43651 if you need a dust boot for the other CNC Shark machines.* Dust Boot measures 4-3/8" x 9-1/4".* Durable polymer construction.* Flexible dust brushes…

    1 Review(s)
    $89.99
  19. Extreme Tool Boss Tool Bag

    Extreme Tool Boss Tool Bag

    If you've ever dreaded lugging your hard, heavy tool box out to the jobsite, then you'll love the Extreme Tool Boss Tool Bag from Bucket Boss. With its soft sides and adjustable padded shoulder strap, the Tool Boss won't bang up your knees, and it won't stretch out your arm like a traditional tool…

    $99.99
  20. Rockler 24'' x 36'' Shop Stand

    Rockler 24'' x 36'' Shop Stand

    The perfect steel stand for your CNC Shark, workbench, assembly table or machining station. Legs and stretchers are pre-drilled to easily add sides, bottom and hinged doors for a built-in cabinet and have square holes for easy assembly with carriage bolts. Legs are heavy-duty 1/8" steel, with…

    1 Review(s)
    $159.99 $99.99

    SAVE 38%

  21. White Acrylic Sheets for CNC Lithophanes-11.8" x 7.9" (For the larger Click-N-Carve Model - BE3030)

    White Acrylic Sheets for CNC Lithophanes-11.8" x 7.9" (For the larger Click-N-Carve Model - BE3030)

    …7.9" sheets are for use with the BE3030 Click-N-Carve CNC Carving Machine, while the 7.32" x 5.31" sheets can be used with either the BE3030, or the BE2015. Most other CNC machines will accept both sizes, but check the capacity on your machine. If your carving requires less detail, you can save…

    From: $39.99
  22. Half-Conical Bits for CNC Carving Machines-Click-N-Carve Bits

    Half-Conical Bits for CNC Carving Machines-Click-N-Carve Bits

    …are precision machined for incredibly precisedetail on carvings, engravings, and lithophanes. The 4mm shank fits both Click-N-Carve CNC models (49449 and 49490, sold separately). Solid carbide for along life and the cleanest possible cut. NOTE: These bits can be used on any CNC router (including…

    0 Review(s)
    $39.99
  23. White Acrylic Sheets for CNC Lithophanes

    White Acrylic Sheets for CNC Lithophanes

    …7.9" sheets are for use with the BE3030 Click-N-Carve CNC Carving Machine, while the 7.32" x 5.31" sheets can be used with either the BE3030, or the BE2015. Most other CNC machines will accept both sizes, but check the capacity on your machine. If your carving requires less detail, you can save…

    $29.99
  24. Controller Bracket for CNC Shark

    Controller Bracket for CNC Shark

    …Rockler, the complete Rockler CNC Table w/Stand and Controller Brackets. * Ideal for use with our 28" x 40" Blank Top (45996, sold separately), which is theperfect size for CNC Shark routers.* Easy to access for emergency shut-downs.* Inside width of CNC Controller Bracket is…

    $19.99
  • Items 1 - 24 of 34
  • Page:
    1. 1
    2. 2
Feedback X