Coping Jig

  • Grid List
  • Page:
    1. 1
  • Items 1 - 14 of 14
  • Page:
    1. 1
  1. Rockler Speed-Cope Crown Molding Jig

    Rockler Speed-Cope Crown Molding Jig

    Cut crown and base molding the easy way with this innovative jig. Speed-Cope™ lets you make tricky cope cuts with ease, for perfect molding faster. It adjusts to handle most molding up to 7-1/4" wide, 45° and 90° inside miters, flat miters, and base, chair, and panel moldings. Includes…

    3 Review(s)
    $149.99
  2. EasyCoper for Crown Molding

    EasyCoper for Crown Molding

    Take the guesswork out of coping crown molding to create perfect inside corners! Allows you to quickly and easily cope crown molding with a power jig saw instead of a coping saw, reducing wrist, hand and arm stress. Coped crown molding is actually one piece of crown fitting over the other piece,…

    $47.99
  3. Rockler Rail Coping Jig

    Rockler Rail Coping Jig

    The Rockler Rail Coping Jig clamps the rail securely in place so there's no chance the stock will wander out of the cut during operation. Use the Rockler Rail Coping Jig for rail and stile doors of cabinets, windows and more to make clean cope cuts without blowouts - perfect for narrow cross-grain…

    117 Review(s)
    $59.99 $44.99

    SAVE 25%

  4. Base Molding Coper

    Base Molding Coper

    …can be a tricky task without a tool like BaseCoper, which features an optimal-angle design for fast, precise-fitting cope cuts using your jigsaw. This easy-to-use jig creates a flat suface on which your jigsaw's base can ride, keeping the blade at the perfect angle for fast, easy cope cuts.

    4 Review(s)
    $18.99
  5. Bench Dog® Crown-Cut

    Bench Dog® Crown-Cut

    …trial and error! Before Crown-Cut, miscalculated compound cuts produced sloppy miters that screamed for caulk and paint. Even if you're using the coping method for inside miters, Crown-Cut will prove useful for the initial cuts. For a professional looking job, cut your crown and cove the easy way!*…

    9 Review(s)
    $27.99
  6. Door Making Kit

    Door Making Kit

    Rail Coping Jig and Woodshop Calculator CDMaking doors just got a lot easier and affordable! The woodshop calculator software saves time and eliminates costly mistakes while the jig keeps your cuts square and rails flat.* Allows you to easily make cuts on the ends of rail doors* Takes the math out…

    $96.28
  7. Incra Build-It System Components

    Incra Build-It System Components

    …can create a huge variety of jigs and fixtures. Modular system allows you to interchange parts for anything from simple shooter boards to deluxe crosscut, miter and coping sleds. It's perfect for expensive specialty items like tenoning jigs. Unlike conventional jigs, you can add features or redesign…

    2 Review(s)
    From: $10.99
  8. Incra Build It Starter Kit

    Incra Build It Starter Kit

    …Build-It System Components and plans for the following jigs. Wooden fence material can be made out of scrapwood and modified to suit your needs.* Adjustable Angle Crosscut Jig* Coping Sled* Disc Sander Jig* Shooter Board Squaring Jig* Tenoning Jig Features:* (1) Large Build-It Panel* (1) Small…

    2 Review(s)
    $146.99
  9. Tormek® Sharpening System with Handtool Kit

    Tormek® Sharpening System with Handtool Kit

    …Short Tool Jig is for straight-shanked carving gouges and V-tools down to 45 mm long. It also sharpens short wood chisels and tools for power carvers. Maximum tool width is 32 mm* The Axe Jig sharpens carving and carpenter's axes. It accommodates a maximum axe height of 170 mm, and copes with both…

    $849.00
  10. Rockler Long Stop for Rockler T-Track System

    Rockler Long Stop for Rockler T-Track System

    …Stop spans the joint line, allowing you to easily flush up rails and stiles by butting them against the stop. This is also handy when assembling cope and stick doors. The keyway on the bottom of the Long Stop runs parallel to the stop face. Two other stop styles are available separately: Short and…

    $12.99
  11. Woodworking with the Router Book

    Woodworking with the Router Book

    …frames, and raise panels* Cut strong, practical joints of all kinds - dadoes, rabbets, laps and half-laps, dovetails and sliding dovetails, mortise-and-tenon* Make simple, accurate jigs and fixtures* Design, make and use templates to cut joints and shape parts* Design, build and use a router table

    3 Review(s)
    $24.95
  12. Tormek® Ultimate Bundle

    Tormek® Ultimate Bundle

    …Short Tool Jig is for straight-shanked carving gouges and V-tools down to 45 mm long. It also sharpens short wood chisels and tools for power carvers. Maximum tool width is 32 mm* The Axe Jig sharpens carving and carpenter's axes. It accommodates a maximum axe height of 170 mm, and copes with both…

    $1,315.00
  13. Handtool Kit for Tormek Sharpening Systems HTK-705

    Handtool Kit for Tormek Sharpening Systems HTK-705

    …Short Tool Jig is for straight-shanked carving gouges and V-tools down to 45 mm long. It also sharpens short wood chisels and tools for power carvers. Maximum tool width is 32 mm.* The Axe Jig sharpens carving and carpenter's axes. It accommodates a maximum axe height of 170 mm, and copes with both…

    1 Review(s)
    $215.00
  14. Tormek® Magnum Bundle

    Tormek® Magnum Bundle

    …Short Tool Jig is for straight-shanked carving gouges and V-tools down to 45 mm long. It also sharpens short wood chisels and tools for power carvers. Maximum tool width is 32 mm* The Axe Jig sharpens carving and carpenter's axes. It accommodates a maximum axe height of 170 mm, and copes with both…

    $1,149.00
  • Grid List
  • Page:
    1. 1
  • Items 1 - 14 of 14
  • Page:
    1. 1
Feedback X