Corner Jig

  • Grid List
  • Page:
    1. 1
  • Items 1 - 21 of 21
  • Page:
    1. 1
  1. Kreg Deck Jig System

    Kreg Deck Jig System

    …or screws! An easy grip handle and 90° alignment tab make setup extremely easy. The onboard drilling jig is preset at the optimal angles for straight-on as well as left and right corner fastening. Simply drill your holes with the included bit and drive the deck screws with the included square…

    6 Review(s)
    $79.00
  2. Clamp-It® Assembly Square

    Clamp-It® Assembly Square

    …outside of a corner, making it ideal for assembling drawers with lipped fronts.* Deck Rails: Use Clamp-It® to hold deck balusters at a perfect 90° angle while fastening.* Bench Jigs: Clamp-It® can be secured to any work surface to create a simple 90° assembly jig.* 5" Clamp-It®…

    109 Review(s)
    $12.99
  3. EasyCoper for Crown Molding

    EasyCoper for Crown Molding

    …inside corners! Allows you to quickly and easily cope crown molding with a power jig saw instead of a coping saw, reducing wrist, hand and arm stress. Coped crown molding is actually one piece of crown fitting over the other piece, instead of the two being mitered at the inside corner.* Handles…

    $47.99
  4. Bench Dog® Bullnose Trim Gauge

    Bench Dog® Bullnose Trim Gauge

    Simplify trim work on 3/4" rounded drywall corners with this clever jig. It helps layout perfect lines for tight-fitting three-piece corners. Plus, if you're working alone you can nail it in place to anchor your tape measure. Great for installing both crown and base molding. Technical Details:*…

    6 Review(s)
    $10.49
  5. Magswitch T-Handle Magnetic Workholding Square

    Magswitch T-Handle Magnetic Workholding Square

    …reinforcing a fence anywhere on a steel table!* 90° corners for squaring.* Switches in and out of fixtures with ease.* Does not included Resaw Guide shown Magsquares allow for the attachment of all types of fixtures, or shop made jigs for quick connect/disconnect on bandsaws, tablesaws, drill…

    2 Review(s)
    $62.99
  6. Box Joint Cauls 12-Pc. Set

    Box Joint Cauls 12-Pc. Set

    Make perfect joints with our Box Joint Jig and NEW Cauls! Uniformly spaced pressure points clamp individual box joint fingers at the corners togive you the tightest joints possible. Simply align the pressure points with box jointfingers and tighten in place with one or more Deluxe Ratcheting Band…

    9 Review(s)
    $32.97
  7. Base Molding Coper

    Base Molding Coper

    Getting corner baseboard to fit together perfectly can be a tricky task without a tool like BaseCoper, which features an optimal-angle design for fast, precise-fitting cope cuts using your jigsaw. This easy-to-use jig creates a flat suface on which your jigsaw's base can ride, keeping the blade at…

    4 Review(s)
    $18.99
  8. Box Joint Cauls

    Box Joint Cauls

    Make perfect joints with our Box Joint Jigand NEW Cauls! Uniformly spaced pressure points clamp individual box joint fingers at the corners togive you the tightest joints possible. Simply align the pressure points with box jointfingers and tighten in place with one or more Deluxe Ratcheting Band…

    10 Review(s)
    $10.99
  9. Clamp-It® Assembly Square 6-Pc. Kit

    Clamp-It® Assembly Square 6-Pc. Kit

    Includes everything needed to easily clamp two corners at a time: two original Clamp-It® Assembly Squares and four 5" Clamp-It® Bar Clamps. Bar Clamp is held in place on the Clamp-It® Assembly Square with a friction fit to make operation quick, easy and one-handed. Technical Details:*…

    $52.99
  10. Rockler Picture-Hanging Keyhole Template

    Rockler Picture-Hanging Keyhole Template

    Hang pictures and other items easily and precisely with this slot cutting template. No measuring is required, just line up the template with the corners of your frame and rout - your slots will always be level. The two short slots are perfectly symmetrical so you can switch easily from left to…

    $11.59
  11. Router Bit Set-Up Jigs-Rail-and-Style Bits

    Router Bit Set-Up Jigs-Rail-and-Style Bits

    …the table and align the jig with the cutting edge of the bit.. This system is ideal for making accurate rail-and-stile construction, lock miter joints and more. All jigs are manufactured for 3/4" stock. They are made of durable HDPE and measure 2" x 3-7/8" x 3/4". (Jigs designed for rail-and-stile…

    $7.69
  12. Universal Fence Clamps with Clamp-It® Square, Special Offer!

    Universal Fence Clamps with Clamp-It® Square, Special Offer!

    …Clamp-It® Assembly Square replaces custom clamping jigs, acts as a third hand, and eliminates the need for long clamps. Used with the included Universal Fence Clamps, you can assemble any two pieces at 90 degrees, or even a cabinet one corner at a time. * Works with any joinery technique, from…

    14 Review(s)
    $29.99
  13. Distinctive Series Dovetail Router Bits, 8mm Shank

    Distinctive Series Dovetail Router Bits, 8mm Shank

    …angle offers a more traditional look and less chance of breakage at the corner of the tail. Thicker 8mm shanks minimize vibration and chatter. All three work perfectly with the 5/16" straight bit included with Rockler Dovetail Jig (22818). Unconditionally guaranteed. * Precision balanced for smooth…

    2 Review(s)
    From: $17.99
  14. Router Bit Set-Up Jigs for 22637 Drawer Lock Corner Bit

    Router Bit Set-Up Jigs for 22637 Drawer Lock Corner Bit

    …every time! Simply bring the router bit up through the table and align the jig with the cutting edge of the bit. All jigs are manufactured for 3/4" stock. They are made of durable HDPE and measure 2" x 3-7/8" x 3/4". (Jigs designed for rail-and-stile have the rail cut on one side and the stile cut…

    $7.69
  15. Incra Universal Precision Positioning Jig

    Incra Universal Precision Positioning Jig

    …tool in your shop, including router table, table saw, drill press and band saw.* Includes box joint template and dovetail & corner post template. Simply set the jig to the color-coded reference marks and make your cuts. No math, no measurements, and no complicated setups.* Features ultra precise…

    2 Review(s)
    $69.99
  16. Hinge Cup Drilling Jigs

    Hinge Cup Drilling Jigs

    …On Face Frame Hinges* Blum 110° Cross-Corner Hinges* Blum 95° Blind-Corner Hinges Hinge Cup Jig B is used on these hinges:* Blum Nickel Plated Face Frame Hinges Hinge Cup Jig C is used on these hinges:* Mini Blum Clip-On Hinges Hinge Cup Jig D is used on these hinges:* Blum Bi-Fold Hinge

    6 Review(s)
    $7.69
  17. Long Stop for Rockler T-Track System

    Long Stop for Rockler T-Track System

    …planing, or scraping dried glue. Long Stops are also ideally suited for pocket hole face frame assembly. Use two Long Stops to create a square corner to support your face frame parts while drilling. The increased length of the Long Stop spans the joint line, allowing you to easily flush up rails…

    $12.99
  18. T-Slot Bolts-5/16" - 18 Thread T-Slot Bolts

    T-Slot Bolts-5/16" - 18 Thread T-Slot Bolts

    …the difference between a jig that is a pleasure to use, and one that is downright frustrating. These T-bolts have smooth, clean threads for spin-on, spin-off ease when making adjustments to your woodworking jigs and fixtures. They have a smooth finish and rounded corners that make it easy to slide…

    9 Review(s)
    From: $1.19
  19. Leigh M2 Multiple Mortise and Tenon Attachment

    Leigh M2 Multiple Mortise and Tenon Attachment

    …Leigh's M2, Multiple Mortise and Tenon Attachment brings multiple mortise and tenon joints within easy reach of any woodworker who owns a D4 Dovetail Jig and a plunge router with 1/2" collet. The adjustable guide fingers let you cut multiple joints in virtually any layout, in stock up to 24" wide.…

    $268.99
  20. Porter-Cable Door Hinge Template

    Porter-Cable Door Hinge Template

    …2-1/2" to 6" inclusive, in 1/2" increments.* Quick-adjust ratcheting router bit guides accommodate 1/4", 5/8" radius and square-cornered hinges (Corner chisel required for square-cornered butt hinges, sold separately).* Extended template platform provides excellent router stability.* Double-headed…

    $37.99
  21. Shutter Control Arms for Movable Louvers

    Shutter Control Arms for Movable Louvers

    Now you can purchase the control arms for your louvered shutters in pre-milled stock-just cut it to the length you need, and round off the cut corners to your liking. These shutter control arms are milled from straight-grained basswood stock, with a bullnose along the long edge. Combine with our…

    $2.19
  • Grid List
  • Page:
    1. 1
  • Items 1 - 21 of 21
  • Page:
    1. 1
Feedback X