Corner Clamp

  • Items 1 - 24 of 36
  • Page:
    1. 1
    2. 2
  1. Rockler Clamp-It® Assembly Square

    Rockler Clamp-It® Assembly Square

    …long to develop! The Clamp-It® replaces custom clamping jigs, acts as a third hand, and eliminates the need for long bulky clamps. Simply put, the Clamp-It® is a square you can clamp. In fact, you can even assemble a cabinet one corner at a time! Works with any joinery technique, from nails…

    110 Review(s)
    $12.99
  2. Bessey Angle Clamp

    Bessey Angle Clamp

    Use the Bessey right angle clamp for clamping square corners at a precise 90 degrees. The right angle clamp is ideal for holding parts to be screwed or glued together. The clamp's maximum opening is 7/8" on one side and 2-1/2" on the other side for members of different thicknesses and 1-3/4" for…

    4 Review(s)
    $42.99
  3. 2-Pack Clamp-It® Assembly Squares with Bench Dog® 4-Pack 5'' Mini Bar Clamps

    2-Pack Clamp-It® Assembly Squares with Bench Dog® 4-Pack 5'' Mini Bar Clamps

    Includes everything needed to easily clamp two corners at a time: two original Clamp-It® Assembly Squares and four Bench Dog 5" Mini Bar Clamps. Clamp-It® Assembly Square holds the bar clamp with a friction fit for quick, easy, one-handed operation. * Ideal for picture frame joinery, RTA…

    1 Review(s)
    $56.99 $29.99

    SAVE 47%

  4. Kreg 90 Degree Corner Clamp

    Kreg 90 Degree Corner Clamp

    Clamping corners just got easier! This innovative holder lets you quickly square and secure individual joints on drawers, shelving, and more. Additional features:* Self-squaring design ensures precise results, every time. * Quick-adjust handle lets you make fast and easy adjustments on stock up to…

    10 Review(s)
    $34.99
  5. Rockler Miter-Tight Picture Frame Clamp

    Rockler Miter-Tight Picture Frame Clamp

    clamp. Spring-loaded jaws transfer clamping pressure directly to the joint. The large ergonomic knob easily tightens jaws onto frames 5/8" to 2-7/8" wide. Back jaws adjust up to 1° to ensure a perfect fit if joint is slightly out of square. Open design allows easy access to outside corners and…

    6 Review(s)
    $77.99
  6. Rockler Quick-Release Corner Framing Clamp Kit

    Rockler Quick-Release Corner Framing Clamp Kit

    …four corners for fast, easy adjustments. Corners tighten independently, so you can add pressure wherever it is needed! With 45-1/2" max. opening capacity.This 20 pc. kit includes (8) 1/4" x 20 threaded rods,(4) Quick release threaded nuts, (4) Threaded connector nuts, and (4) Right angle corners.

    45 Review(s)
    $28.99 $19.99

    SAVE 31%

  7. Rockler Clamp-It® Assembly Square 6-Pc. Kit

    Rockler Clamp-It® Assembly Square 6-Pc. Kit

    Includes everything needed to easily clamp two corners at a time: two original Clamp-It® Assembly Squares and four 5" Clamp-It® Bar Clamps. Bar Clamp is held in place on the Clamp-It® Assembly Square with a friction fit to make operation quick, easy and one-handed. Technical Details:*…

    $52.99
  8. Frame Clamp Kit

    Frame Clamp Kit

    …Adjustable clamp is self-squaring as it pulls all four corners together. Reversible jaws work for either small or large frames. Clamps anywhere in a range from 5" x 7" to 26" x 30" . Quickly and easily folds for compact storage. Technical Details:* Self squaring, adjustable* Clamps all 4 corners

    39 Review(s)
    $34.99
  9. Rockler Universal Fence Clamps with Clamp-It® Square, Special Offer!

    Rockler Universal Fence Clamps with Clamp-It® Square, Special Offer!

    …Fence Clamps in this all-in-one package! The Clamp-It® Assembly Square replaces custom clamping jigs, acts as a third hand, and eliminates the need for long clamps. Used with the included Universal Fence Clamps, you can assemble any two pieces at 90 degrees, or even a cabinet one corner at a…

    14 Review(s)
    $29.99
  10. Rockler 45° Lock Miter Router Bits - 1/2'' Shank

    Rockler 45° Lock Miter Router Bits - 1/2'' Shank

    …provide a strong mechanical locking action that makes it much easier to clamp. There is no tendency for the joint to slide out of alignment under clamping pressure, and the wedged tenons tighten up nicely for a strong corner joint. The increased long grain gluing surface also helps to strengthen the…

    From: $57.99
  11. Extra Strap Clips for the Bessey Variable Angle Strap Clamp

    Extra Strap Clips for the Bessey Variable Angle Strap Clamp

    These corner pieces easily slip onto the strap of the Bessey Variable Angle Strap Clamp (33861, sold separately) to make clamping multi-sided projects easy. They feature pivoting feet that adjust to angles ranging from 60° to 180°. Package of six.

    $20.99
  12. Trim Clip Miter Clip

    Trim Clip Miter Clip

    …miter clamp firmly shut, while the notch keeps the tips of the miters neatly aligned. Once clamped, you can also rotate the clamp handle up and out of the way, providing access so you can nail the miter and move on to the next corner. The metal spurs hold the wood firmly and allow the clamp to be…

    1 Review(s)
    $16.99
  13. Box Joint Cauls 12-Pc. Set

    Box Joint Cauls 12-Pc. Set

    …Cauls! Uniformly spaced pressure points clamp individual box joint fingers at the corners togive you the tightest joints possible. Simply align the pressure points with box jointfingers and tighten in place with one or more Deluxe Ratcheting Band Clamps (41419, sold separately).Slots on the outside…

    9 Review(s)
    $32.97
  14. Trim Clip Miter Aid

    Trim Clip Miter Aid

    …if the trim piece is long. Not so with the Miter Aid. Simply clip it on with the integral spring clamp, and the Miter Aid provides a slot for your tape measure, perfectly aligned with the inside corner of a 45° miter. No need for an assistant and no need to measure from the one inch mark and…

    $14.99
  15. PushMaster™ Picture Frame Joiner Kit

    PushMaster™ Picture Frame Joiner Kit

    …Quickly and easily inserts V-nails, flexipoints, backing nails and screw eyes into hard and soft woods.* For use with most types of frame clamps. Technical Details:* Includes PushMaster tool, 400 V-nails and instructions, plus a starter assortment of backing nails and flexipoints.* PushMaster…

    $89.99
  16. Bessey Variable Angle Strap Clamp

    Bessey Variable Angle Strap Clamp

    The unique, geared winder gives you precise, distortion-free clamping on angles from 60º - 180º. Rewinder keeps the 1" x 23' strap neatly stored.* #33861 is a strap clamp that comes with four corner pieces.* #33879 is an accessory pack of six more corner pieces.

    9 Review(s)
    $50.39
  17. Rockler Mini Clamp-It® Assembly Square Kit

    Rockler Mini Clamp-It® Assembly Square Kit

    …needed to clamp two corners at time; comes with two Mini Clamp-It® Assembly Squares and four 4" Mini Clamp-It® Bar Clamps. The clamps supplied with this kit are specially designed to work with the Mini Clamp-It® Assembly Squares. Technical Details:* 6 Pc. kit.* Mini Bar Clamp is held in…

    0 Review(s)
    $41.99
  18. Box Joint Cauls

    Box Joint Cauls

    …Cauls! Uniformly spaced pressure points clamp individual box joint fingers at the corners to give you the tightest joints possible. Simply align the pressure points with box joint fingers and tighten in place with one or more Deluxe Ratcheting Band Clamps (41419, sold separately). Slots on the…

    10 Review(s)
    $10.99
  19. Rockler Auto-Lock T-Track Clamp

    Rockler Auto-Lock T-Track Clamp

    …through a hole in the handle, and adjusts clamping pressure from 10 to 500 lbs* Non-slip pad on base of clamp prevents unwanted shifting* Clamp face also features a pad that prevents marring your workpiece* Angled notch in clamp face cradles outside corners and irregularly shaped objects* Rugged…

    1 Review(s)
    $29.99
  20. Rockler Pipe Clamp Rack/Bar Clamp Rack

    Rockler Pipe Clamp Rack/Bar Clamp Rack

    …pipe clamps leaned up in the corner! This new clamp rack from Rockler puts your pipes firmly on the wall or on the Pack Rack (21834, sold separately) so you'll never have to hear your clamps clatter on the concrete again. The nine slots in the clamp rack are sized to accept pipe clamps, bar clamps

    12 Review(s)
    $15.99
  21. Logan F-300-1 Studio Picture Frame Joiner

    Logan F-300-1 Studio Picture Frame Joiner

    Simply secure your frame in the corner clamp, press down on the lever, and the Logan Studio Joiner inserts a metal V-nail to create a perfect, permanent joint, just like you would get at a framing shop. The joiner can be used with moldings up to 2-1/2" wide, and includes adjustable supports so you…

    1 Review(s)
    $149.99
  22. Surface Mount Corner Brackets for Table Aprons

    Surface Mount Corner Brackets for Table Aprons

    These brackets reinforce connections between table rails quickly and easily. No gluing and no clamping required. * Made from solid steel.* Installation requires hanger bolts and wing nuts, not included.* Size is 2-5/8" x 3-3/8" Flat.* Sold in packs of four.

    6 Review(s)
    $5.39
  23. Festool MFK 700 EQ Set Trim Router with New T-Loc Systainer

    Festool MFK 700 EQ Set Trim Router with New T-Loc Systainer

    …w/ dust extraction shroud* MFK 1.5° horizontal base unit* Dust extraction hood and sensor bearing guide for horizontal base* 1/4" clamping collet* 8mm clamping collet* Collet wrench* New T-Loc SystainerSpecifications:* Weight: 4.2 lbs* Power consumption: 720 watts* Column stroke: 9/16"* Idling…

    $525.00
  24. SawStop Contractor Table Saw Dust Collection Panel

    SawStop Contractor Table Saw Dust Collection Panel

    …SawStop® CNS series table saw, making it easy to connect and disconnect hoses when the time comes to move your saw to a new jobsite or into a new corner of your garage workshop. Includes 2-1/2" and 4" ports, which fit most dust collection systems. NOTE: No International shipping available on…

    $49.00 $36.75

    SAVE 25%

  • Items 1 - 24 of 36
  • Page:
    1. 1
    2. 2
Feedback X