Cornering Tool

  • Items 1 - 24 of 121
  • Page:
    1. 1
    2. 2
    3. 3
  1. 2-In-1 Cornering And Trimming Tool

    2-In-1 Cornering And Trimming Tool

    The affordable and easy to use 2-in-1 cornering and trimming tool is perfect for "easing off" 90 degree corners and trimming veneers. It comes complete with two blades: A veneer trimmer and an edge softening blade for quickly and accurately rounding off sharp edges. Technical Details:* Includes…

    8 Review(s)
    $15.99
  2. Rockler Clamp-It® Assembly Square

    Rockler Clamp-It® Assembly Square

    …eliminates the need for long bulky clamps. Simply put, the Clamp-It® is a square you can clamp. In fact, you can even assemble a cabinet one corner at a time! Works with any joinery technique, from nails to hand cut dovetails. It's ideal for every stage of construction, from assembling plywood…

    110 Review(s)
    $12.99
  3. Rockler Quick-Release Corner Framing Clamp Kit

    Rockler Quick-Release Corner Framing Clamp Kit

    …four corners for fast, easy adjustments. Corners tighten independently, so you can add pressure wherever it is needed! With 45-1/2" max. opening capacity.This 20 pc. kit includes (8) 1/4" x 20 threaded rods,(4) Quick release threaded nuts, (4) Threaded connector nuts, and (4) Right angle corners.

    45 Review(s)
    $19.99
  4. Quick Corners Set

    Quick Corners Set

    Save time while improving accuracy! Just position the template to draw perfect corners every time. These templates eliminate the guesswork and inaccuracy of using things like jar lids and rulers.* Set includes 1/2-2" convex arcs, 3-6" convex arcs, 1/2-2" concave arcs and 1/2" -2" 45° angles.

    4 Review(s)
    $25.49
  5. Classic Bed Plans

    Classic Bed Plans

    …that make this Classic Bed so appealing. The tapered leg bottoms. The matching arches in the headboard and footboard. The stopped chamfers on the corners of the legs. Combine this with solid wood construction, and you have a bed that will be in your family for generations. The Classic Bed consists…

    12 Review(s)
    $15.79
  6. Robert Sorby Multi-Tip Hollowing Tool (RS200KT)

    Robert Sorby Multi-Tip Hollowing Tool (RS200KT)

    …produces a crisp corner in a box. The scraper features a rounded section for inside curves and a flat section for outside curves. A selection of optional cutters is available below. See "more images" for profiles. * 3/4" half-flat shank is in permanent contact with the tool rest and so minimizes…

    5 Review(s)
    $102.99
  7. Corner Mortising Chisel

    Corner Mortising Chisel

    This easy to use spring loaded chisel instantly squares round corners on hinge mortises. Made of hardened steel that stays sharp. Just tap lightly with a hammer for a perfectly squared corner.

    3 Review(s)
    $14.99
  8. Spring-Loaded Corner Chisel

    Spring-Loaded Corner Chisel

    …where this corner chisel can really clean up shop. One quick chop, and the corner chisel cuts a neat ninety degree corner that is perfectly aligned with the hinge gain. The corner chisel is razor sharp and spring-loaded, so it immediately returns to a ready position for the next hinge corner. Simple…

    1 Review(s)
    $26.99
  9. Frame Clamp Kit

    Frame Clamp Kit

    Tightens all four corners simultaneously for ease of use. Adjustable clamp is self-squaring as it pulls all four corners together. Reversible jaws work for either small or large frames. Clamps anywhere in a range from 5" x 7" to 26" x 30" . Quickly and easily folds for compact storage. Technical…

    39 Review(s)
    $34.99
  10. Ezy-Framer V-Nail Installation Tool

    Ezy-Framer V-Nail Installation Tool

    This is the perfect picture framing tool for do-it-yourself frame makers!* Easily inserts V-nails and backing nails.* Includes Ezy-Framer and 100 1/4" V-nails to make up to 25 frames. V-nail installation tool lets you easily join mitered corners.* Easily inserts V-nails and backing nails.* Includes…

    6 Review(s)
    $41.99
  11. Drawer Mounting Kits for Multi-Function Shop Stand-Drawer Mounting Kits

    Drawer Mounting Kits for Multi-Function Shop Stand-Drawer Mounting Kits

    …with Drawers, you will need the following:* Drawer Mounting Kit: Available in either 18" or 24" depth. Each Drawer Mounting Kit includes 4 Vertical Corner Brackets, 2 Horizontal Slide Brackets and mounting hardware (enough to install one drawer)* Optional Slide Bracket Kit: Available in either 18"…

    $31.49
  12. Veneer Saw

    Veneer Saw

    Get a clean cut and a perfect fit every time. The double edged veneer saw features a compound offset handle making it ideal for use in corners. Technical Details:* 4-1/2" beechwood handle* Compound offset handle* double edged blade* Replacement blade available (#44024)

    1 Review(s)
    $17.49
  13. Robert Sorby Corner Chisel

    Robert Sorby Corner Chisel

    …collection by Robert Sorby for the demanding craftsman, cabinet maker, furniture restorer and house builder, this Sorby Corner Chisel is perfect for cutting accurate, square corners for mortises. Fitted with a fine boxwood handle, this classic chisel measures 10-1/4" long. Honing recommended before…

    1 Review(s)
    $79.99
  14. Pack Rack® Tool Apron

    Pack Rack® Tool Apron

    …for hand tools* Eighteen 1/2" x 5-1/2" pockets* Five 1/2" x 3" pockets for pencils, nail punches, etc.* One custom combo square pocket* Easy-access slot for your tape measure* Two steel loops for your hammer, drill, or mallet* Small steel loop for hanging rolls of tape* Four reinforced steel corner

    2 Review(s)
    $31.99
  15. Bosch Multi-X Oscillating Tool Kit MX30EL-37

    Bosch Multi-X Oscillating Tool Kit MX30EL-37

    …speed under load.* Ball-joint cord swivel: For enhanced ease of tool positioning and for cord durability.* Ergonomic: Small grip circumference and soft grip areas for comfort and control.* Compact: Small enough to reach into corners and other tight spaces.* Reinforced gearing and metal gear housing:…

    $299.99
  16. Bosch Multi-X Oscillating Tool Kit MX30EK-33

    Bosch Multi-X Oscillating Tool Kit MX30EK-33

    …speed under load.* Ball-joint cord swivel: For enhanced ease of tool positioning and for cord durability.* Ergonomic: Small grip circumference and soft grip areas for comfort and control.* Compact: Small enough to reach into corners and other tight spaces.* Reinforced gearing and metal gear housing:…

    $249.99
  17. Freud® 99-020 Corner Beading Router Bit - 15/16" Dia x 5/8" H x 1/2" Shank

    Freud® 99-020 Corner Beading Router Bit - 15/16" Dia x 5/8" H x 1/2" Shank

    Application: Beams, posts, railings and fine furniture. * Adds an attractive bead to beams, posts, railings, and millwork. * Ideal for accenting square table legs. * Cuts all composition materials, plywoods, hardwoods, and softwoods. * Use on hand-held and table-mounted portable routers.

    $47.97
  18. Dremel 4200-8/64 Corded Rotary Tool Kit, 75-Piece Platinum Edition

    Dremel 4200-8/64 Corded Rotary Tool Kit, 75-Piece Platinum Edition

    …everything from a Flex-Shaft for detail work to a Garden Tool Sharpener that can even sharpen your lawn mower blades. Add to that 64 sanding, cutting and grinding accessories and a deluxe storage case with metal latches, reinforced corners and a foam-lined drawer with stay-closed glide…

    $219.00
  19. Fein Multimaster FMM 250Q Top Kit

    Fein Multimaster FMM 250Q Top Kit

    …interface for mounting additional system accessories.* High performance 250 Watt motor.* Softgrip zone provides optimal handling.* Power consumption: 250 Watts* Oscillations: 11,000-20,000 rpm* Weight according to EPTA: 3.1 lbs* Cable with plug: 16 ft* Sanding pad, corner to corner: 3-1/8"

    $299.99
  20. 45 Degree Stainless Steel Miter Gauge

    45 Degree Stainless Steel Miter Gauge

    This solid steel gauge is perfect for quick miter layout and tool setup. Mark 45° linesfor picture frames, corner molding, box constructions and more. Stand it upright andprep saw blades or drill press tables for angled applications. The interior windowmakes marking parallel lines fast and easy.…

    $16.99
  21. 6" Diamond Stones

    6" Diamond Stones

    …chisels, and fine pointed tools. Also great for sharpening HSS and carbon! The fast cutting surface pattern is self-clearing and stays flat. The continuous diamond "micro pad" (the non-patterned area in the corner of the stone) is ideal for sharpening very small tools. These stones may be used with…

    1 Review(s)
    $44.69
  22. Flexcut® SK725 #11 x 3/16" Thumbnail Gouge

    Flexcut® SK725 #11 x 3/16" Thumbnail Gouge

    …grind keeps the corners from digging into the wood as the tool is rolled up. Ideal for creating hollows, rounds and sweeping curves. This is an unhandled carving tool, and fits the Flexcut® SK100 Quick Connect Handle (20219, sold separately). Made in USA. * Unhandled carving tools let you save…

    $15.49
  23. Grex Green Buddy 18 gauge Brad Nailer, 1850GB

    Grex Green Buddy 18 gauge Brad Nailer, 1850GB

    …puttying.* Posit-Fire™ depth control with detents won't back out, even after driving hundreds of shots.* Stepped magazine allows tool to access corners.* Dual firing options offer selective actuation between sequential and contact fire modes.* Extra no-mar tip attached to magazine for when…

    $198.00
  24. RapidAir Maxline Compressed Air 3/4'' Piping System

    RapidAir Maxline Compressed Air 3/4'' Piping System

    …oils All Fittings:* Nickel plated brass* Double O-ring design* Split ring allows disassembly* No expensive tools required Recommended for:* Building layouts with many obstructions, corners etc* Multiple air users* Industrial plants, auto body and repair shops, farm, woodworking* Underground burial*…

    $249.99
  • Items 1 - 24 of 121
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X