Cove Raised Panel Bit

  • Grid List
  • Page:
    1. 1
  • Items 1 - 9 of 9
  • Page:
    1. 1
  1. Freud Quadra-Cut™ Cove Raised Panel Bits

    Freud Quadra-Cut™ Cove Raised Panel Bits

    …You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Application: Ideal for creating raised panels for doors and paneling, as well as decorative tops, plaques and molding* Revolutionary Quadra-Cut™design combines two small wings that cut downward…

    2 Review(s)
    From: $104.47
  2. Raised Panel Router Bit - Cove - Horizontal

    Raised Panel Router Bit - Cove - Horizontal

    …horizontal panel raising bits offer an exceptionally smooth shearing cut, and virtually eliminate fuzzing on the end grain of your panels. In addition, they allow you to raise panels with curving profiles, such as for arched doors or cathedral style doors. These raised panel bits are manufactured…

    3 Review(s)
    From: $64.99
  3. Cove Raised Panel Bit P602

    Cove Raised Panel Bit P602

    Use this Cove Raised Panel Bit (P602) with its integral guide bearing to raise both straight and arched top door panels! The bit cuts both the cove profile on the front of the panel and the recessed in the back of the panel in one pass, giving you a perfect panel edge thickness every time and a 1/4"…

    0 Review(s)
    $142.99
  4. Freud Quadra-Cut™ Cove Raised Panel Bits with BackCutters

    Freud Quadra-Cut™ Cove Raised Panel Bits with BackCutters

    …this panel raiser to mill panels from 3/4" stock that are flush with the door frame for a professional, architecturally correct appearance. The cove profile raised panel bit also includes a back cutter to cut the relief so the panel fits into the groove. This means there's no need to plane panels

    4 Review(s)
    $119.97
  5. Rockler Cove Vertical Raised Panel Router Bit, 1-1/4" Diameter x 1-5/8"H

    Rockler Cove Vertical Raised Panel Router Bit, 1-1/4" Diameter x 1-5/8"H

    Vertical panel raising bits concentrate more of their weight toward the center of the bit, reducing strain on the motor and allowing you to spin the bit at higher RPMs. This means you can raise panels with an ordinary 2 HP router mounted in a router table. Precision machining paired with a sturdy…

    $54.99
  6. Freud 97-152, 3-Piece Door Set

    Freud 97-152, 3-Piece Door Set

    …shims enable a tight fit when using plywood and also allow use with thick panels from 7/32" to 1/4" thick. High-density carbide composition and Perma-Shield® coating lengthen bit life and protect against heat and pitch buildup. 1/2" shanks. Also includes a 3-1/2" dia. Cove Raised Panel Bit.

    $183.47
  7. Freud 97-252, 3-Piece Door Set

    Freud 97-252, 3-Piece Door Set

    …Adjustable shims enable a tight fit when using plywood and also allow use with panels as thin as 7/32". High-density carbide composition and Perma-Shield® coating lengthen bit life and protect against heat and pitch build-up. 1/2" shanks. Also includes a 3-1/2" dia. Cove Raised Panel Bit.

    2 Review(s)
    $183.47
  8. Freud 97-258, 3-Piece Door Set

    Freud 97-258, 3-Piece Door Set

    …tight fit when using plywood and also allow use with panels as thin as 7/32". High-density carbide composition and Perma-Shield® coating lengthen bit life and protect against heat and pitch build-up. 1/2" shanks. Also includes a 3-1/2" diameter Quadra-Cut Cove Raised Panel Bit with back cutter.

    2 Review(s)
    $201.97
  9. Freud 97-158, 3-Piece Door Set

    Freud 97-158, 3-Piece Door Set

    bits work for any door 5/8" to 1-1/4" thick. The unique cutter geometry virtually eliminates tearout. Adjustable shims let you adjust the panel groove from 7/32" to 1/4" thick, enabling a tight fit when using plywood. Also includes a 3-1/2" diameter Cove Raised Panel Bit with back cutter. The panel

    1 Review(s)
    $195.97
  • Grid List
  • Page:
    1. 1
  • Items 1 - 9 of 9
  • Page:
    1. 1
Feedback X