Cross Cut

  • Items 1 - 24 of 70
  • Page:
    1. 1
    2. 2
    3. 3
  1. Cutoff Platform for Rockler Cross Cut Sled

    Cutoff Platform for Rockler Cross Cut Sled

    This sled accessory secures to smaller table saws, providing zero-clearance workpiece support for safe, splinter-free cuts. The 1/2" thick MDF platform features a smooth sliding melamine surface and a locking aluminum miter bar. Use only with our Crosscut Sled for Portable Table Saws. This platform…

    2 Review(s)
    $28.99 $19.99

    SAVE 31%

  2. Tablesaw CrossCut Sled

    Tablesaw CrossCut Sled

    …table with melamine coating.* Easy-to-read 1/2° graduations and a hair-line indicator ensure error-free setups.* Extra material allows you to cut the sled down to fit your saw perfectly.* Right edge of sled functions as a zero-clearance chip breaker.* Includes four 2' pieces of 3/4" wide…

    91 Review(s)
    $139.99
  3. Portable Cross Cut Sled

    Portable Cross Cut Sled

    This scaled-down version of our full-sized sled fits onto smaller table saws for precise cuts wherever you're working. A large protractor scale at the end of the fence lets you precisely tune angles for air-tight miters and crosscuts – no more squinting. Features smooth-sliding no-slop ball…

    13 Review(s)
    $119.99
  4. Reclaimed Oak Lumber - Route 66 Truck Decking

    Reclaimed Oak Lumber - Route 66 Truck Decking

    …oak, and dotted along the edges with blackened holes from when the bolts were torched out. The bolt holes can be left on for character, or you can cut around them if desired. The other side is less worn, and shows rust bands from the tractor trailer's frame. At 1-1/4" thick, this is heavy lumber…

    1 Review(s)
    $89.85
  5. Rockler Rail Coping Jig

    Rockler Rail Coping Jig

    …so there's no chance the stock will wander out of the cut during operation. Use the Rockler Rail Coping Jig for rail and stile doors of cabinets, windows and more to make clean cope cuts without blowouts - perfect for narrow cross-grain rail cuts. If you're after a cabinet door jig, look no further!…

    116 Review(s)
    $59.99 $49.99

    SAVE 17%

  6. CrossCut Sled Drop-Off Platform

    CrossCut Sled Drop-Off Platform

    …(33113), this platform will provide true zero-clearance support on both sides of the blade for safe, splinter-free cuts. By keeping drop-off pieces from sagging at the end of the cut, it prevents them from splitting off unpredictably, and from getting jammed in the throat plate. Easy to use - just…

    4 Review(s)
    $34.99
  7. 2 Flute Shear Flush Trim Bit, 3/4" Dia. x 1-1/2" Cutter x 1/2" Shank

    2 Flute Shear Flush Trim Bit, 3/4" Dia. x 1-1/2" Cutter x 1/2" Shank

    …of chopping at the wood fibers at a 90° angle, the twin shear cutters on this bit slice through stock at a slight angle, producing a smoother cut than traditional straight-fluted bits. The unique design also helps eliminate tear-out problems that occur when routing end-grain, figured grain or…

    13 Review(s)
    $34.99
  8. Bethlehem Olivewood Cross Laser-Cut Inlay Pen Kit Blank

    Bethlehem Olivewood Cross Laser-Cut Inlay Pen Kit Blank

    This two-part kit lets you build your own composite pen blank with an authenticBethlehem Olivewood cross inlaid into a walnut barrel. Once turned, the assembledparts create a seamless wood body for a beautiful finished pen. Pen components notincluded. Designed for Manhattan Chrome, Manhattan Gold,…

    4 Review(s)
    $19.99
  9. Festool TS 55 Fine Tooth Circular Saw Blade

    Festool TS 55 Fine Tooth Circular Saw Blade

    Tungsten-Carbide, ATB saw blade for fine cross cuts in sheet goods, melamine, hard and soft woods. 48 teeth.

    $73.00
  10. Freud Quadra-Cut Beading Bit

    Freud Quadra-Cut Beading Bit

    …Quadra-Cut™ 4 cutter design provides the smoothest cuts possible, providing crisp, clean edges every time, even with cross-grain cuts in difficult materials.* Use beading over bits to soften furniture edges while retaining definition.* Cuts all composition materials, plywoods, hardwoods, and…

    3 Review(s)
    $51.97
  11. Freud Quadra-Cut™ Rounding Over Bits

    Freud Quadra-Cut™ Rounding Over Bits

    …Quadra-Cut design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Rounding over bit applications: Soften furniture edges and create decorative rounded edges.* Cuts all composition materials, plywoods, hardwoods,…

    11 Review(s)
    From: $38.97
  12. Freud Quadra-Cut Beading Bits-Optional Sizes

    Freud Quadra-Cut Beading Bits-Optional Sizes

    …Beading Bits cut a precise radius with a step on either side, the perfect combination of tactile softness and visual definition. The 4 cutter Quadra-Cut design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials.…

    3 Review(s)
    From: $38.97
  13. Freud Quadra-Cut™ Rounding Over Bits

    Freud Quadra-Cut™ Rounding Over Bits

    …4 cutter design provides the smoothest cuts possible, providing crisp, clean edges every time, even with cross-grain cuts in difficult materials.* Use rounding over bits to soften furniture edges and to create decorative rounded edges.* Cuts all composition materials, plywoods, hardwoods,…

    1 Review(s)
    From: $35.97
  14. Freud 99-520 Quadra-Cut™ Ogee Raised Panel Bit

    Freud 99-520 Quadra-Cut™ Ogee Raised Panel Bit

    …wings that shear upward for a smooth finish, and two small wings that cut downward for an absolutely splinter- and fuzz-free edge, even on cross-grain cuts in difficult materials.* Use 5/8" height is ideal for 3/4" stock.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on…

    1 Review(s)
    $104.47
  15. Freud Quadra-Cut Classical Cove & Round Bit

    Freud Quadra-Cut Classical Cove & Round Bit

    …provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Two large cutters shear upward to carve out the profile, while two smaller cutter shear downward to clean up any fuzzing along the edges.* Cuts all composition…

    $54.97
  16. Freud Quadra-Cut Cove and Bead Bits

    Freud Quadra-Cut Cove and Bead Bits

    Freud's exclusive Quadra-Cut™ 4-cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Two upshear cutters rout out the bulk of the waste, while two downshear cutters clean up any fuzzing or chipping…

    13 Review(s)
    $49.47
  17. Freud Quadra-Cut Cove and Bead Bits-Optional Sizes

    Freud Quadra-Cut Cove and Bead Bits-Optional Sizes

    …cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials.* Add distinctive design to cabinets, furniture, plaques, and millwork with these decorative edging bits.* Cuts all composition materials, plywoods,…

    13 Review(s)
    From: $40.47
  18. Freud Quadra-Cut™ Cove and Bead Bits - 1/4'' Shank

    Freud Quadra-Cut™ Cove and Bead Bits - 1/4'' Shank

    …smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Application: Decorative edging for cabinets, molding and furniture* Add distinctive design to cabinets, furniture, plaques, and millwork with these decorative edging bits.* Cuts all…

    From: $37.47
  19. Freud Quadra-Cut Classical Ogee & Round Bit

    Freud Quadra-Cut Classical Ogee & Round Bit

    Freud's exclusive Quadra-Cut™ 4-cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. The two large upshear cutters carve out the primary profile, while the two smaller downshear cutters clean up any…

    3 Review(s)
    $55.47
  20. Freud Quadra-Cut™ Cove Raised Panel Bits

    Freud Quadra-Cut™ Cove Raised Panel Bits

    cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Application: Ideal for creating raised panels for doors and paneling, as well as decorative tops, plaques and molding* Revolutionary Quadra-Cut™design combines two small wings that cut

    2 Review(s)
    From: $104.47
  21. Freud 99-513 Quadra-Cut™ Ogee Raised Panel Bit

    Freud 99-513 Quadra-Cut™ Ogee Raised Panel Bit

    …that cut downward to shear the top edge for a splinter-free surface, and two large wings that shear upward for the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials.* 5/8" carbide height is ideal for 3/4" stock.* Cuts all composition…

    1 Review(s)
    $98.97
  22. Freud® #99-510 Quadra-Cut Ogee Raised-Panel Bit

    Freud® #99-510 Quadra-Cut Ogee Raised-Panel Bit

    …exclusive Quadra-Cut™ four-cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Quadra-Cut™design combines two small wings that cut downward to shear the top edge for a splinter-free surface and…

    $98.97
  23. Freud Quadra-Cut Table Top Classical Bold Bit

    Freud Quadra-Cut Table Top Classical Bold Bit

    …features Freud's exclusive Quadra-Cut™ 4-cutter design, which provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. * Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and…

    $67.47
  24. Freud Quadra-Cut Ogee Double Fillet Bits

    Freud Quadra-Cut Ogee Double Fillet Bits

    Freud's exclusive Quadra-Cut™ 4-cutter design provides the smoothest cuts possible, even with cross-grain cuts in difficult materials. The two primary cutters have an upward slicing action that reduces burning and improves chip ejection, while the two smaller cutters are angled downward to…

    5 Review(s)
    $41.47
  • Items 1 - 24 of 70
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X