Cutoffs

  • Items 1 - 24 of 36
  • Page:
    1. 1
    2. 2
  1. Exotic Cutoffs, 10 lb. Box

    Exotic Cutoffs, 10 lb. Box

    A blend of assorted exotics - perfect for ornamental turnings and small projects. May include some rare species worth up to $25 per board foot. No two boxes are exactly the same! Sizes range from roughly 2" to 12" long. Widths and thicknesses vary widely. Box measures 8" x 6" x 12".

    32 Review(s)
    $29.99
  2. ButtKicker 1000-Watt Amplifier

    ButtKicker 1000-Watt Amplifier

    …surround processor or stereo preamp with nominal signal levels of 160 mVolts. Other features include: * Low Cutoff Switch - cuts off frequencies below 25Hz (ideal for musicians) * High Cutoff Switch with Frequency Control - allows you to select the point where the amplifier filters out frequencies…

    $360.49
  3. Cutoff Platform for Rockler Cross Cut Sled

    Cutoff Platform for Rockler Cross Cut Sled

    This sled accessory secures to smaller table saws, providing zero-clearance workpiece support for safe, splinter-free cuts. The 1/2" thick MDF platform features a smooth sliding melamine surface and a locking aluminum miter bar. Use only with our Crosscut Sled for Portable Table Saws. This platform…

    2 Review(s)
    $28.99 $19.99

    SAVE 31%

  4. Infiniter® RS-1 Laser Cutting Guide

    Infiniter® RS-1 Laser Cutting Guide

    Produces a bright, easy-to-see line for dead-on accurate cuts. Triggered by the centrifugal force of the machine, it starts automatically with powered saw action.* Fits most 7-1/4", 8", 10" and 12" miter/chop/cutoff and handheld circular saws.* Easy to install and use!* Powered by three alkaline…

    117 Review(s)
    $29.99
  5. Freud® LU74R Industrial Thin Kerf Ultimate Cut-Off Saw Blades

    Freud® LU74R Industrial Thin Kerf Ultimate Cut-Off Saw Blades

    This thin kerf blade produces glass smooth surfaces when crosscutting hardwoods and softwoods, thanks to Freud's unique side grinding technology. The larger blades are ideal for miter box applications. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower…

    3 Review(s)
    From: $57.47
  6. Freud® LU85R Industrial Ultimate Cut-Off Saw Blades

    Freud® LU85R Industrial Ultimate Cut-Off Saw Blades

    This superior blade gives glass-smooth finishes when crosscutting hard and soft woods, so no sanding is required. What makes this blade so special is the unique side grinding of each tooth. The teeth actually polish the material as it cuts. New laser-cut anti-vibration that resonates in standard…

    From: $71.47
  7. Norton® Bluefire™ Straight Reinforced Cut-Off Wheel - 3'' Diameter

    Norton® Bluefire™ Straight Reinforced Cut-Off Wheel - 3'' Diameter

    These Norton small diameter cut-off wheels feature thin kerfs for quick burn-free and burr-free cutting. Choose 0.035'' (about 1/32'') for the fastest cutting and lowest kerf loss, and 0.060'' (about 1/16'') for a slightly tougher cutting applications. They all excel at cutting sheet metal, pipe,…

    From: $3.99
  8. Dewalt DC411KA Heavy-Duty 18V Cordless 4-1/2'' Cut-Off Tool

    Dewalt DC411KA Heavy-Duty 18V Cordless 4-1/2'' Cut-Off Tool

    Heavy-Duty 18V Cordless 4-1/2" Cut-Off Tool * 3 Year Limited Warranty* 6,500 rpms provides high power for cutting and grinding applications* Metal gear case dissipates heat for longer bearing, gear and motor life* 2 position side handle offers more versatility and comfort to the user Includes: * 1…

    $274.99
  9. Norton® Metal™ Straight Reinforced Cut-Off Wheel, 4-1/2'' Dia. x 0.040'' Thick x 7/8'' Hole

    Norton® Metal™ Straight Reinforced Cut-Off Wheel, 4-1/2'' Dia. x 0.040'' Thick x 7/8'' Hole

    Cut-off wheels from the Norton® Metal™ line deliver consistent burn-free and burr-free performance with a low initial cost. Designed for all steel and ferrous metals, they are formulated from aluminum oxide using a finer grit mixture that limits premature shedding or spalling, extends the…

    $2.49
  10. Norton® Gemini® Straight Reinforced Cut-Off Wheel, 4-1/2'' Dia. x 0.045'' Thick x 7/8'' Hole

    Norton® Gemini® Straight Reinforced Cut-Off Wheel, 4-1/2'' Dia. x 0.045'' Thick x 7/8'' Hole

    Norton Gemini cut-off wheels deliver consistent performance and a relatively low initial cost, plus extended cutting capabilities over the Norton® Metal™ line. Designed for steel and ferrous metals, they are also capable of cutting stainless steel, alloys and cast iron with virtually no…

    $3.99
  11. Norton® Bluefire™ Straight Reinforced Cut-Off Wheel, 4-1/2'' Dia. x 0.045'' Thick x 7/8'' Hole

    Norton® Bluefire™ Straight Reinforced Cut-Off Wheel, 4-1/2'' Dia. x 0.045'' Thick x 7/8'' Hole

    These Bluefire cut-off wheels boast a thin kerf for fast cutting and low kerf loss on metal pipe, metal plate and sheet metal. Bluefire wheels are the product of advanced chemistry using zirconia alumina abrasive with premium aluminum oxide grain. They provide an excellent performance-to-price…

    $4.49
  12. Rockler Aluminum Miter Bar

    Rockler Aluminum Miter Bar

    …for a perfect fit in any standard 3/4" x 3/8" miter slot. Available individually in 18", 24" and 36" lengths.* Great for shop-made crosscut jigs, cutoff tables, taper jigs and more.* Aluminum won't warp, swell or shrink like wooden runners — jigs fit perfectly time after time.* 1/4-20 threaded…

    12 Review(s)
    From: $19.99
  13. Universal Fence Clamps with Clamp-It® Square, Special Offer!

    Universal Fence Clamps with Clamp-It® Square, Special Offer!

    …stop blocks, or in pairs for sacrificial fences, half-fences, resaw fences, and a variety of other fixtures* Works great for table saws, band saws, cutoff saws, router fences and more* Attach the Clamp-It® to a work surface using the Universal Fence Clamps, and it becomes a right angle fixture…

    14 Review(s)
    $29.99
  14. Norton® Metal™ Depressed Center Grinding Wheel - 4-1/2'' Diameter

    Norton® Metal™ Depressed Center Grinding Wheel - 4-1/2'' Diameter

    …most severe right angle grinding applications from heavy stock removal to rough blending. 1/8'' thick depressed center wheels can also be used for cut-off applications. These wheels are formulated from aluminum oxide using a finer grit mixture that limits premature shredding or spalling, extends the…

    $3.99
  15. Norton® Bluefire™ Depressed Center Grinding Wheel - 4-1/2'' Diameter

    Norton® Bluefire™ Depressed Center Grinding Wheel - 4-1/2'' Diameter

    …most severe right angle grinding applications from heavy stock removal to rough blending. 1/8'' thick depressed center wheels can also be used for cut-off applications. These wheels are formulated from aluminum oxide using a finer grit mixture that limits premature shredding or spalling, extends the…

    $6.99
  16. Norton® NorZon 20X High-Performance Flap Disc - 4-1/2'' Diameter

    Norton® NorZon 20X High-Performance Flap Disc - 4-1/2'' Diameter

    Flap discs are versatile grinding and finishing tools capable of a wide range of applications ranging from heavy stock removal to surface blending. They are capable of performing the functions of both grinding wheels and fiber discs. These flap discs are the cream of the crop, ranked ''best'' in…

    $10.99
  17. Merit® Flap Disc - 4-1/2'' Diameter

    Merit® Flap Disc - 4-1/2'' Diameter

    Merit flap discs are a competitively priced option for grinding and surface blending of stainless steel, cast iron, aluminum and other metals. The flap discs feature zirconia alumina abrasive and fiberglass backing plates, which are strong, lightweight and absorb vibration. Flap discs last longer…

    From: $7.99
  18. Norton® Speed-Lok Quick Change Fiber Discs - 2'' Diameter (5-Pack)

    Norton® Speed-Lok Quick Change Fiber Discs - 2'' Diameter (5-Pack)

    If you don't own an angle grinder, these fiber discs paired with a drill-mount arbor (53376, sold separately) will do the trick and also save you some money. They feature a tool-free, twist-on/twist-off fastening system that makes fast work of disc changes and maximizes productivity. Even if you…

    $6.99
  19. Norton® Speed-Lok Quick Change Non-Woven Discs - 3'' Diameter (5-Pack)

    Norton® Speed-Lok Quick Change Non-Woven Discs - 3'' Diameter (5-Pack)

    If you don't own an angle grinder, these non-woven discs paired with a drill-mount arbor (50957, sold separately) will do the trick and also save you some money. They feature a tool-free, twist-on/twist-off fastening system that makes fast work of disc changes and maximizes productivity. Even if you…

    $14.99
  20. Clinch Nut Plates

    Clinch Nut Plates

    …plate creates a rock-solid, removable assembly. Use with a 5/16" hanger bolts (not included). Sold in packs of four. Technical Details* Extra heavy duty steel* 2-5/8" square with 13/16" x 13/16" corner cut-offs* Requires 5/16" hanger bolt (not included) Best Used With Item #24414 5/16" hanger bolts

    $5.49
  21. Deer Grunt Game Call Hardware - Winglock Calls

    Deer Grunt Game Call Hardware - Winglock Calls

    …quality and consistency at an affordable price. Has the same assemblies used in award winning Winglock Game Calls, these inserts deliver rich tonal quality and are made to withstand the rigors of daily use in the field. * Great project for shop cut-offs* Wood not included - use any species you like!

    1 Review(s)
    $13.69
  22. Short Reed Goose Call - Winglock Calls

    Short Reed Goose Call - Winglock Calls

    …offer hunters quality and consistency at an affordable price. Has the same assemblies used in award winning Winglock Game Calls, these inserts deliver rich tonal quality and are made to withstand the rigors of daily use.* Great project for shop cut-offs* Wood not included - use any species you like!

    1 Review(s)
    $16.39
  23. Double Reed Duck Call Hardware - Winglock Calls

    Double Reed Duck Call Hardware - Winglock Calls

    …and consistency at an affordable price. Has a similar assembly used in award winning Winglock Game Calls, this insert offers authentic tonal quality and is made to withstand the rigors of daily use in the duck blind. * Great project for shop cut-offs* Wood not included - use any species you like!

    2 Review(s)
    $16.39
  24. Adjustable Molding Storage Rack

    Adjustable Molding Storage Rack

    …cabinets-out of the way until it's time to trim out your project. The rack is also a nice size to install above your miter saw as a place to store cutoffs. Includes two heavy-duty 12" steel standards and four sturdy 10" brackets to make two adjustable shelves. Technical Details:* Supports up to 300…

    $21.99
  • Items 1 - 24 of 36
  • Page:
    1. 1
    2. 2
Feedback X