Cutting Dados With Router

  • Items 1 - 24 of 33
  • Page:
    1. 1
    2. 2
  1. MPower Combination Router Base CRB7

    MPower Combination Router Base CRB7

    Realize the full potential of your router in only seconds with the easy-to-install CRB7 Multi-Function Router Base. The CRB7 arms your router with the ability to cut fully microadjustable dadoes, mortises, circles, and indexed grooves for faux paneling and shelving systems. In addition to that, the…

    6 Review(s)
    $79.99
  2. Freud 3-Piece Undersized Plywood Router Bit Sets

    Freud 3-Piece Undersized Plywood Router Bit Sets

    …and pitch build up. Set comes in Freud's new case with bit mount to keep bits handy and safe. All bits have 1/4'' shanks. Cuts all composition materials, plywoods, hardwoods and softwoods. Use on hand-held and table mounted portable routers. * These Freud bits are designed specifically for superior…

    From: $51.47
  3. Festool CMS-GE Router Table Set

    Festool CMS-GE Router Table Set

    …in combination for infeed and outfeed support.* Router lift is integrated-just slip the handle into place and crank the lift toraise or lower the bit height in increments of 1/256 of an inch.* Adjustable stops make cuts such as stopped dadoes easy and repeatable.* Included featherboard/bit guard…

    $1625.00
  4. DeWalt DWP611PK Compact Router With Trim Router Table and Dust Port

    DeWalt DWP611PK Compact Router With Trim Router Table and Dust Port

    …round overs, chamfers, and small dadoes in your shop or at the job site. Sets up quickly yet it's just as easy to detach your router from the table without tools. Use your router with the included 1/4'' thick acrylic base to do freehand work like a standard router. The acrylic base not only provides…

    $273.48
  5. Dado Jig for Low Profile Straight Edge Clamp System

    Dado Jig for Low Profile Straight Edge Clamp System

    …for the ideal Dado solution? The Dado Jig is uniquely designed to fit in the channel of our Low Profile Straight Edge Clamp System ensuring the jig does not wander from the straight edge. Perfect cuts every time! Technical Details:* The Rockler Dado Jig is designed to be used with a 1/2" straight…

    1 Review(s)
    $44.99
  6. Undersized Router Bits-1/2 Inch  Shank

    Undersized Router Bits-1/2 Inch Shank

    …used for plywood joinery. Use these bits to cut grooves, dadoes and rabbets. Of course, they can also be used for general purpose material removal or any application which requires a flat, finished bottom. The two-flute cutters give a smooth finish with a medium feed rate. Two flutes, 1/2" shank.

    21 Review(s)
    $20.99 From: $13.99

    SAVE 33%

  7. Freud Carbide Up-Spiral Router Bits

    Freud Carbide Up-Spiral Router Bits

    …chip removal with a cut that can't be matched by standard straight bits. Ideal for production settings.* Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods.* Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    1 Review(s)
    From: $51.47
  8. Freud Top Bearing Mortising Dado Router Bits

    Freud Top Bearing Mortising Dado Router Bits

    …bits can be used with templates for perfect accuracy and repeatability. They are designed with deep center gullets for maximum material removal without chip loading. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held…

    From: $22.47
  9. Freud Up-Spiral Router Bits - 1/4'' Shank

    Freud Up-Spiral Router Bits - 1/4'' Shank

    …removal with a cut that can’t be matched by standard straight bits. Ideal for production settings.* Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods.* Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    From: $20.47
  10. Rockler 4-Pc. Straight Bit Set

    Rockler 4-Pc. Straight Bit Set

    dados, grooves and rabbets for your cabinetry and furniture with this four-piece boxed set of straight router bits. The set includes the most commonly used straight bits: 1/4", 3/8", 1/2" and 3/4", and comes in a convenient storage box. All bits are double flute, combining a smooth cut with

    5 Review(s)
    $59.99
  11. Freud Down-Spiral Router Bits

    Freud Down-Spiral Router Bits

    …carbide bit cuts dadoes with crisp, clean edges on both sides of the dado. The downward spiral forces the chips down into the groove, eliminating the tendency for wood fibers to chip out the face. Also works great for cutouts and edgework. 1/2" shank. Application: Grooves and dadoes in single-sided…

    3 Review(s)
    From: $50.97
  12. 1/2'' Pattern Router Bit

    1/2'' Pattern Router Bit

    With its 1/4" maximum depth of cut, this straight bit is ideally suited for routing hinge mortises and shallow dadoes. At 1/2" wide, you can rout dadoes in multiple passes to precisely fit stock of almost any thickness. Two flutes for fast, smooth, accurate trim cuts. Ball-bearing guide makes it…

    5 Review(s)
    $18.99
  13. Ready2Rout Router Table Fence

    Ready2Rout Router Table Fence

    …workpiece and the system automatically positions the fence for the cuts.* Touch screen can be used to indicate the router bit width, and to convert to metric decimals or fractions. For example, you can use a 1/4-inch bit to rout a 12mm dado without complicated calculations or measurements.* Firmware…

    2 Review(s)
    $599.99
  14. Pattern Flush Trim Router Bit 3/4'' Diameter x 1-1/4'' Height

    Pattern Flush Trim Router Bit 3/4'' Diameter x 1-1/4'' Height

    …or template cutting. Since the bearing is top-mounted, the template is also top-mounted, and you get a clear view of the cut line. Of course, it also doubles as a 3/4" dado bit, and can be used to trim veneers and other laminates flush with the substrate. Two flutes, for fast, smooth, accurate cuts.

    21 Review(s)
    $26.99
  15. Woodworking with the Router Book

    Woodworking with the Router Book

    …Woodworking with the Router, Router Magic, Illustrated Cabinetmaking and Outdoor Furniture for the Backyard Builder.* Softcover.* 376 pages.* A Reader's Digest book. Learn the best ways to: * Cut decorative edgings and moldings* Surface wood and joint edges for glue-ups* Shape furniture parts* Cut

    3 Review(s)
    $24.95
  16. Festool CMS Sliding Table

    Festool CMS Sliding Table

    …moves with the workpiece. With its integrated, adjustable stop points, it is easy to set up repeat cuts like stopped dados. Also built-in to the sliding table are multiple mounting points for the optional Miter Gauge assembly with fence (45173, sold separately). The Miter Gauge, in conjunction with

    $350.00
  17. The Best of Woodworker's Journal, 3 Book Set

    The Best of Woodworker's Journal, 3 Book Set

    …sleep in comfort and style with the 18 projects in Benches, Chairs and Beds. Furnish your home with beautiful casework while increasing your storage space with the 16 stunning projects in Cabinets and Storage Solutions. To make each project run without a hitch, the 30 router tables, workbenches and…

    $59.85
  18. Freud Mortising Bits

    Freud Mortising Bits

    …joinery applications like mortises, and dadoes.* Designed with deep center gullets for maximum material removal without chip loading.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    2 Review(s)
    From: $18.47
  19. 4-Piece Straight Bit Set - 1/4" Shank

    4-Piece Straight Bit Set - 1/4" Shank

    …using dados, grooves and rabbets. Bits are designed to produce up to a 1" cut depth, so they can also be used to cut mortises. These precision balanced router bits are made from top grade carbide and have a baked-on anti-stick coating to reduce pitch and resin buildup. They are suitable for use with

    $54.99
  20. Rockler T-Slot Cutter Router Bit

    Rockler T-Slot Cutter Router Bit

    …allow jigs to be moved to any position needed on the track. Cuts slots to fit standard T-Slot Bolts. Instructions:* First cut a 3/8'' groove with a router bit or dado blade.* Repeat the cut with the T-slot bit. Note: This bit does not cut Universal T-Tracks or slotwalls. 3/8" Between Cutter &…

    18 Review(s)
    $29.99 $20.99

    SAVE 30%

  21. Festool CMS-VL Router Table Set For Use With MFT/3 Table

    Festool CMS-VL Router Table Set For Use With MFT/3 Table

    …in combination for infeed and outfeed support.* Router lift is integrated-just slip the handle into place and crank the lift to raise or lower the bit height in increments of 1/256 of an inch.* Adjustable stops make cuts such as stopped dadoes easy and repeatable.* Included featherboard/bit guard…

    $1325.00
  22. Festool CMS-VL Router Table For Use With MFT/3 Table

    Festool CMS-VL Router Table For Use With MFT/3 Table

    …in combination for infeed and outfeed support.* Router lift is integrated - just slip the handle into place and crank the lift to raise or lower the bit height in increments of 1/256 of an inch.* Adjustable stops make cuts such as stopped dadoes easy and repeatable.* Included featherboard/bit guard…

    $1025.00
  23. Festool CMS-GE Router Table

    Festool CMS-GE Router Table

    …them in combination for infeed and outfeedsupport.* Router lift is integrated-just slip the handle into place and crank the lift toraise or lower the bit height in increments of 1/256 of an inch.* Adjustable stops make cuts such as stopped dadoes easy and repeatable.* Included featherboard/bit guard…

    $1225.00
  24. Undersized Router Bits-1/4 Inch  Shank

    Undersized Router Bits-1/4 Inch Shank

    …used for plywood joinery. Use these bits to cut grooves, dadoes and rabbets. Of course, they can also be used for general purpose material removal or any application which requires a flat, finished bottom. The two-flute cutters give a smooth finish with a medium feed rate. Two flutes, 1/4" shank.

    21 Review(s)
    From: $13.99
  • Items 1 - 24 of 33
  • Page:
    1. 1
    2. 2
Feedback X