Dado Bit

  • Items 1 - 24 of 36
  • Page:
    1. 1
    2. 2
  1. Rockler Straight, 2-Flute Router Bits - 1/4" Shank

    Rockler Straight, 2-Flute Router Bits - 1/4" Shank

    One of the most common router bits, straight router bits are used to cut grooves, dadoes, rabbets, and for general purpose material removal. They are also capable of cutting mortises. Each bit has two carbide flutes that are precision ground for the smoothest possible cuts, and a long cutting life…

    11 Review(s)
    From: $13.99
  2. Rockler Undersized Straight Router Bits - 1/4" Shank

    Rockler Undersized Straight Router Bits - 1/4" Shank

    bits are slightly undersized to cut tight-fitting grooves and dadoes for plywood that is thinner than its stated nominal thickness, which applies to most plywood and veneered MDF. Typical straight bits leave an unsightly gap when used for plywood joinery. Use these bits to cut grooves, dadoes and…

    21 Review(s)
    From: $13.99
  3. Rockler T-Slot Cutter Router Bit - 5/8" Dia x 3/16" H x 1/2" Shank

    Rockler T-Slot Cutter Router Bit - 5/8" Dia x 3/16" H x 1/2" Shank

    …jigs to be moved to any position needed on the track. Cuts slots to fit standard T-Slot Bolts. Instructions:* First cut a 3/8'' groove with a router bit or dado blade.* Repeat the cut with the T-slot bit. Note: This bit does not cut Universal T-Tracks or slotwalls. 3/8" Between Cutter & Shank.

    18 Review(s)
    $29.99
  4. Rockler Pattern Router Bit - 1/2" Dia x 1/4" H x 1/4" Shank

    Rockler Pattern Router Bit - 1/2" Dia x 1/4" H x 1/4" Shank

    With its 1/4" maximum depth of cut, this straight bit is ideally suited for routing hinge mortises and shallow dadoes. At 1/2" wide, you can rout dadoes in multiple passes to precisely fit stock of almost any thickness. Two flutes for fast, smooth, accurate trim cuts. Ball-bearing guide makes it…

    5 Review(s)
    $18.99
  5. Rockler Dado Jig for Low Profile Straight Edge Clamp System

    Rockler Dado Jig for Low Profile Straight Edge Clamp System

    …Rockler Dado Jig is designed to be used with a 1/2" straight bit.* Any straight bit can be used, but the user will have to account for the different offset from the edge of the dado sled. This means you can use a 1/4" straight bit for dadoes under 1/2", or a 3/4" straight bit for wider dadoes.*

    1 Review(s)
    $44.99 $32.99

    SAVE 27%

  6. Rockler Undersized Plywood Router Bit Set

    Rockler Undersized Plywood Router Bit Set

    …result, regular size bits usually don't cut a tight-fitting dado. Fortunately, undersized dado bits like these will help your joinery fit perfectly, resulting in stronger assemblies and nearly invisible joint lines. This set includes the three most common sizes of straight bits for undersized…

    10 Review(s)
    $44.99
  7. Freud® Top Bearing Mortising Dado Router Bits - 1/4" Shank

    Freud® Top Bearing Mortising Dado Router Bits - 1/4" Shank

    …as hand-held and table-mounted portable routers. * Features TiCo™ Hi-Density carbide for longer bit life and a flawless finish.* Perma-SHIELD® Non-stick Coating protects from heat, gumming, and corrosion.* Each bit is computer-balanced and precision-ground for the smoothest possible cuts.

    0 Review(s)
    From: $22.47
  8. Rockler 4-Piece Straight Bit Set - 1/4" Shank

    Rockler 4-Piece Straight Bit Set - 1/4" Shank

    This straight bit set includes four of the most useful cut diameters of this popular router bit type: 1/4", 3/8", 1/2", and 3/4". They are well suited for joining case goods using dados, grooves and rabbets. Bits are designed to produce up to a 1" cut depth, so they can also be used to cut mortises.…

    $54.99
  9. Freud® 89-650 4-Pc. Undersized Plywood Router Bit Set - 1/2" Shank

    Freud® 89-650 4-Pc. Undersized Plywood Router Bit Set - 1/2" Shank

    Creates perfectly fitted grooves and dadoes for today's plywood, which nearly always measures less than the stated nominal thickness. Cut dadoes for 1/4", 3/8", 1/2" and 3/4" nominal thickness stock, without the unsightly gaps that result from standard sized bits. Set comes in Freud's unique shadow…

    5 Review(s)
    $79.97
  10. Freud® Mortising Router Bits - 1/2" Shank

    Freud® Mortising Router Bits - 1/2" Shank

    …of the cutters on these Freud Mortising Bits works to eliminate splintering, making them particularly well suited for cutting hinge mortises, where a crisp outline is critical. They can also be used ideal for joinery applications like mortises, and dadoes.* Designed with deep center gullets for…

    2 Review(s)
    From: $18.47
  11. Freud® 3-Pc. Undersized Plywood Router Bit Set

    Freud® 3-Pc. Undersized Plywood Router Bit Set

    dados. The down shear design on the 23/32'' bit virtually eliminates splintering, and all bits feature Freud's TiCo Hi-Density Carbide to withstand the rigors of routing plywood containing high glue content, which rapidly dulls standard bits. The Non-Stick Perma Shield Coating also protects bits

    From: $51.47
  12. iGaging 6'' MiniMag Magnetic Fractional Digital Height Gauge

    iGaging 6'' MiniMag Magnetic Fractional Digital Height Gauge

    …powerful magnetic base on this height gauge clamps itself to any ferrous metal surface for setting the precise height of your saw blade, dado blade or router bit with an accuracy of 0.001". Also great for aligning jointer knives. The MiniMag Digital Height Gauge features a large LCD display with…

    2 Review(s)
    $49.99
  13. Freud® Down-Spiral Router Bits - 1/2" Shank

    Freud® Down-Spiral Router Bits - 1/2" Shank

    …carbide bit cuts dadoes with crisp, clean edges on both sides of the dado. The downward spiral forces the chips down into the groove, eliminating the tendency for wood fibers to chip out the face. Also works great for cutouts and edgework. 1/2" shank. Application: Grooves and dadoes in single-sided…

    3 Review(s)
    From: $50.97
  14. Rockler Straight, 2-Flute Router Bits - 1/2" Shank

    Rockler Straight, 2-Flute Router Bits - 1/2" Shank

    Precisely machined for square, straight-sided cuts, Rockler Straight Bits are the perfect candidates for dadoes, grooves and mortises of all sizes. All feature sturdy 1/2" shanks, which reduce vibration and chatter for a smoother cut. This in turn translates to tighter joints and stronger joinery.…

    15 Review(s)
    From: $13.49
  15. Rockler 4-Pc. Straight Bit Set - 1/2" Shank

    Rockler 4-Pc. Straight Bit Set - 1/2" Shank

    Cut tight-fitting dados, grooves and rabbets for your cabinetry and furniture with this four-piece boxed set of straight router bits. The set includes the most commonly used straight bits: 1/4", 3/8", 1/2" and 3/4", and comes in a convenient storage box. All bits are double flute, combining a smooth…

    5 Review(s)
    $59.99
  16. Freud® Top Bearing Flush Trim Router Bits - 1/2" Shank

    Freud® Top Bearing Flush Trim Router Bits - 1/2" Shank

    The top-mounted guide bearings on these router bits make them ideal for grooving, lettering and dadoes, as well as any other template work where the template is mounted on the top face of the workpiece. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other…

    From: $31.97
  17. Freud® Carbide Up-Spiral Router Bits - 1/2" Shank

    Freud® Carbide Up-Spiral Router Bits - 1/2" Shank

    …mortises and routing deep blind holes * Freud's solid carbide up spiral bits combine effective chip removal with a cut that can't be matched by standard straight bits. Ideal for production settings.* Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods.* Use…

    1 Review(s)
    From: $51.47
  18. Freud® 90-150 5-Pc. Up Cut Spiral Router Bit Set

    Freud® 90-150 5-Pc. Up Cut Spiral Router Bit Set

    Up-cut router bits are ideal for efficient chip ejection when cutting mortises, dado cuts, and deep blind holes, and also where speed of cut is the primary consideration. They also work perfectly for template routing when the bottom side of the project must be kept chip-free. The bit set comes…

    $159.97
  19. Rockler 5-Pc. Starter Bit Set - 1/2 Shank

    Rockler 5-Pc. Starter Bit Set - 1/2 Shank

    With two joinery bits for basic dados and rabbets, plus three bearing-guided edge profiling bits, this five-piece router bit set will cover the bases for both solid structure and visual embellishment. All bits have 1/2" shanks to reduce chatter and provide maximum performance. A convenient storage…

    $149.99
  20. Freud® 90-160 5-Pc. Down-Spiral Solid Carbide Router Bit Set

    Freud® 90-160 5-Pc. Down-Spiral Solid Carbide Router Bit Set

    …and dadoes, the groove itself serves as a channel for ejecting chips, so these bits are an ideal way of getting a clean-looking joint. The set comes in Freud's unique "shadow box" case, which hangs on the wall or mounts on your bench to keep bits organized and protected. Solid carbide bits cut all…

    $159.97
  21. Freud® 91-103 5-Pc. Introductory Router Bit Set H 1/2" Shank

    Freud® 91-103 5-Pc. Introductory Router Bit Set H 1/2" Shank

    …router bits in the shop, this 5-Piece Introductory Router Bit Set is sure to see plenty of use. The flush-trim bit is indispensable for flushing up face frames and shelf caps with their mating panels. Use the 1/4" straight bit for routing grooves and dadoes. The ogee and round over bits are ideal…

    $98.97
  22. Rockler 4-Pc. Dovetail Router Bit Upgrade Set - 8mm Shank

    Rockler 4-Pc. Dovetail Router Bit Upgrade Set - 8mm Shank

    …than 1/4" bits. The extra mass in the shank helps to reduce chatter. Ideal for joining case goods, the set includes 1/2" x 14° and 8° dovetail bits, a 5/16" straight bit, and 1/2" to 8mm collet adapter. The straight bit can be used for box joints, or for cutting grooves and dados. Fits all…

    1 Review(s)
    $54.99
  23. Rockler Convex Edging Router Bit - 7/8" Dia x 1/2" H x 1/2" Shank

    Rockler Convex Edging Router Bit - 7/8" Dia x 1/2" H x 1/2" Shank

    Our Convex Edging Bit can be used to rout the rounded flanks of homemade Lincoln logs—a children's classic. Simply cut the profiles and then use a straight bit to cut half-lap dados in the logs so they interlock. In addition, the bit can be used to rout a rounded edge on shelves and table…

    1 Review(s)
    $29.99
  24. Freud® 50-098 Top Bearing Flush Trim Router Bit - 5/16" Dia x 1" H x 1/4" Shank

    Freud® 50-098 Top Bearing Flush Trim Router Bit - 5/16" Dia x 1" H x 1/4" Shank

    The oversized top-mounted guide bearing on this router bit makes it ideal for grooving, lettering and dadoes, as well as any other template work where the template is mounted on the top face of the workpiece. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other…

    $27.97
  • Items 1 - 24 of 36
  • Page:
    1. 1
    2. 2
Feedback X