Dado Bits For Router

  • Items 1 - 24 of 34
  • Page:
    1. 1
    2. 2
  1. Rockler Straight, 2-Flute Router Bits - 1/2" Shank

    Rockler Straight, 2-Flute Router Bits - 1/2" Shank

    Precisely machined for square, straight-sided cuts, Rockler Straight Bits are the perfect candidates for dadoes, grooves and mortises of all sizes. All feature sturdy 1/2" shanks, which reduce vibration and chatter for a smoother cut. This in turn translates to tighter joints and stronger joinery.…

    15 Review(s)
    From: $13.49
  2. Freud® Top Bearing Mortising Dado Router Bits - 1/4" Shank

    Freud® Top Bearing Mortising Dado Router Bits - 1/4" Shank

    …automatic routers as well as hand-held and table-mounted portable routers. * Features TiCo™ Hi-Density carbide for longer bit life and a flawless finish.* Perma-SHIELD® Non-stick Coating protects from heat, gumming, and corrosion.* Each bit is computer-balanced and precision-ground for the…

    0 Review(s)
    From: $22.47
  3. Freud® 3-Pc. Undersized Plywood Router Bit Set

    Freud® 3-Pc. Undersized Plywood Router Bit Set

    …portable routers. * These Freud bits are designed specifically for superior performance in plywood joinery for perfectly fitted grooves and dados.* Freud's undersized plywood bits deliver perfect gap-free joints compared to standard bits that make sloppy joints. Create tight joints for shelving,…

    From: $51.47
  4. Rockler Undersized Plywood Router Bit Set

    Rockler Undersized Plywood Router Bit Set

    …size bits usually don't cut a tight-fitting dado. Fortunately, undersized dado bits like these will help your joinery fit perfectly, resulting in stronger assemblies and nearly invisible joint lines. This set includes the three most common sizes of straight bits for undersized plywood: 23/32" for

    10 Review(s)
    $44.99
  5. Freud® Mortising Router Bits - 1/2" Shank

    Freud® Mortising Router Bits - 1/2" Shank

    …these Freud Mortising Bits works to eliminate splintering, making them particularly well suited for cutting hinge mortises, where a crisp outline is critical. They can also be used ideal for joinery applications like mortises, and dadoes.* Designed with deep center gullets for maximum material…

    2 Review(s)
    From: $18.47
  6. Rockler 4-Piece Straight Bit Set - 1/4" Shank

    Rockler 4-Piece Straight Bit Set - 1/4" Shank

    …diameters of this popular router bit type: 1/4", 3/8", 1/2", and 3/4". They are well suited for joining case goods using dados, grooves and rabbets. Bits are designed to produce up to a 1" cut depth, so they can also be used to cut mortises. These precision balanced router bits are made from top…

    $54.99
  7. Rockler 4-Pc. Dovetail Router Bit Upgrade Set - 8mm Shank

    Rockler 4-Pc. Dovetail Router Bit Upgrade Set - 8mm Shank

    router bit set features 8mm shanks, which are 25% larger than 1/4" bits. The extra mass in the shank helps to reduce chatter. Ideal for joining case goods, the set includes 1/2" x 14° and 8° dovetail bits, a 5/16" straight bit, and 1/2" to 8mm collet adapter. The straight bit can be used for

    1 Review(s)
    $54.99
  8. Freud® Down-Spiral Router Bits - 1/4" Shank

    Freud® Down-Spiral Router Bits - 1/4" Shank

    …Grooves and dadoes in single-sided veneers and laminates.* Freud's solid carbide down spiral bits are ideal for smooth, chip-free routing where chip removal is not a problem.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on CNC and other automatic routers as well as…

    From: $19.97
  9. Rockler Dado Jig for Low Profile Straight Edge Clamp System

    Rockler Dado Jig for Low Profile Straight Edge Clamp System

    bit.* Any straight bit can be used, but the user will have to account for the different offset from the edge of the dado sled. This means you can use a 1/4" straight bit for dadoes under 1/2", or a 3/4" straight bit for wider dadoes.* Works with any straight edge!* For the ideal solution, the Dado

    1 Review(s)
    $44.99 $32.99

    SAVE 27%

  10. Rockler Straight, 2-Flute Router Bits - 1/4" Shank

    Rockler Straight, 2-Flute Router Bits - 1/4" Shank

    One of the most common router bits, straight router bits are used to cut grooves, dadoes, rabbets, and for general purpose material removal. They are also capable of cutting mortises. Each bit has two carbide flutes that are precision ground for the smoothest possible cuts, and a long cutting life…

    11 Review(s)
    From: $13.99
  11. Rockler Undersized Straight Router Bits - 1/4" Shank

    Rockler Undersized Straight Router Bits - 1/4" Shank

    bits are slightly undersized to cut tight-fitting grooves and dadoes for plywood that is thinner than its stated nominal thickness, which applies to most plywood and veneered MDF. Typical straight bits leave an unsightly gap when used for plywood joinery. Use these bits to cut grooves, dadoes and…

    21 Review(s)
    From: $13.99
  12. Freud® Down-Spiral Router Bits - 1/2" Shank

    Freud® Down-Spiral Router Bits - 1/2" Shank

    …Grooves and dadoes in single-sided veneers and laminates. * Freud's solid carbide down spiral bits are ideal for smooth, chip-free routing where chip removal is not a problem. * Cuts all composition materials, plywoods, hardwoods, and softwoods. * Use on CNC and other automatic routers as well as…

    3 Review(s)
    From: $50.97
  13. Freud® Carbide Up-Spiral Router Bits - 1/2" Shank

    Freud® Carbide Up-Spiral Router Bits - 1/2" Shank

    …carbide up spiral bits combine effective chip removal with a cut that can't be matched by standard straight bits. Ideal for production settings.* Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods.* Use on CNC and other automatic routers as well as…

    1 Review(s)
    From: $51.47
  14. Rockler Trim Router Table

    Rockler Trim Router Table

    for small applications like routing round-overs, chamfers and small dadoes in your shop or at the job site. Sets up quickly, and it's just as easy to detach your router from the table without tools. Use your router with the included 1/4" thick acrylic base to do freehand work like a standard router.

    9 Review(s)
    $59.99
  15. MPower Combination Router Base CRB7

    MPower Combination Router Base CRB7

    Realize the full potential of your router in only seconds with the easy-to-install CRB7 Multi-Function Router Base. The CRB7 arms your router with the ability to cut fully microadjustable dadoes, mortises, circles, and indexed grooves for faux paneling and shelving systems. In addition to that, the…

    7 Review(s)
    $79.99
  16. Freud® 89-650 4-Pc. Undersized Plywood Router Bit Set - 1/2" Shank

    Freud® 89-650 4-Pc. Undersized Plywood Router Bit Set - 1/2" Shank

    Creates perfectly fitted grooves and dadoes for today's plywood, which nearly always measures less than the stated nominal thickness. Cut dadoes for 1/4", 3/8", 1/2" and 3/4" nominal thickness stock, without the unsightly gaps that result from standard sized bits. Set comes in Freud's unique shadow…

    5 Review(s)
    $79.97
  17. Wixey™ Mini Digital Height Gauge

    Wixey™ Mini Digital Height Gauge

    …from 0 to 3.2" (0-83mm). Perfect for measuring the height of router bits and saw blades, or measuring for placement of a dado with greater accuracy. Magnetic feet make the gauge self-standing for setting the cutter depth on router tables and it has a low profile for back fence adjustments. Switches…

    13 Review(s)
    $25.99
  18. Freud® Up-Spiral Router Bits - 1/4" Shank

    Freud® Up-Spiral Router Bits - 1/4" Shank

    …carbide up spiral bits combine effective chip removal with a cut that can’t be matched by standard straight bits. Ideal for production settings.* Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods.* Use on CNC and other automatic routers as well as…

    From: $20.47
  19. Rockler Undersized Straight Router Bits - 1/2" Shank

    Rockler Undersized Straight Router Bits - 1/2" Shank

    bits are slightly undersized to cut tight-fitting grooves and dadoes for plywood that is thinner than its stated nominal thickness, which applies to most plywood and veneered MDF. Typical straight bits leave an unsightly gap when used for plywood joinery. Use these bits to cut grooves, dadoes and…

    21 Review(s)
    From: $14.49
  20. Freud® Top Bearing Flush Trim Router Bits - 1/2" Shank

    Freud® Top Bearing Flush Trim Router Bits - 1/2" Shank

    …bearings on these router bits make them ideal for grooving, lettering and dadoes, as well as any other template work where the template is mounted on the top face of the workpiece. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as…

    From: $31.97
  21. Freud® Top Bearing Flush Trim Router Bits - 1/4" Shank

    Freud® Top Bearing Flush Trim Router Bits - 1/4" Shank

    …bearings on these router bits make them ideal for grooving, lettering and dadoes, as well as any other template work where the template is mounted on the top face of the workpiece. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as…

    From: $22.97
  22. Freud® 90-150 5-Pc. Up Cut Spiral Router Bit Set

    Freud® 90-150 5-Pc. Up Cut Spiral Router Bit Set

    Up-cut router bits are ideal for efficient chip ejection when cutting mortises, dado cuts, and deep blind holes, and also where speed of cut is the primary consideration. They also work perfectly for template routing when the bottom side of the project must be kept chip-free. The bit set comes…

    $159.97
  23. Freud® 90-160 5-Pc. Down-Spiral Solid Carbide Router Bit Set

    Freud® 90-160 5-Pc. Down-Spiral Solid Carbide Router Bit Set

    Down-spiral router bits direct the force of the cutter downwards as the bit rotates, resulting in the top face of your workpiece remaining perfectly chip-free. They are a perfect fit for cutting grooves and dadoes in chip-prone materials, or for any operation where chip clearance is not the primary…

    $159.97
  24. Freud® 91-103 5-Pc. Introductory Router Bit Set H 1/2" Shank

    Freud® 91-103 5-Pc. Introductory Router Bit Set H 1/2" Shank

    …well-used router bits in the shop, this 5-Piece Introductory Router Bit Set is sure to see plenty of use. The flush-trim bit is indispensable for flushing up face frames and shelf caps with their mating panels. Use the 1/4" straight bit for routing grooves and dadoes. The ogee and round over bits

    $98.97
  • Items 1 - 24 of 34
  • Page:
    1. 1
    2. 2
Feedback X