Degree

  • Items 1 - 24 of 195
  • Page:
    1. 1
    2. 2
    3. 3
  1. Wixey 3'' Digital Protractor

    Wixey 3'' Digital Protractor

    …and bevel angles. And with magnets on every blade edge, it's especially easy to use on metal. It also features a convenient tightening mechanism for holding measurements. Protractor shuts off automatically for an extended battery life.* Uses a 3.0V CR2032 battery* Protractor range: +/- 180 degrees

    5 Review(s)
    $52.99
  2. 45 Degree Miter Sled

    45 Degree Miter Sled

    Perfect miters - no adjustments! Simply cut one piece on the leading face, one on the trailing face, and voila! Since both pieces reference off a perfect 90&deg angle, the miters will fit perfectly.* Pre-installed adjustable nylon pins provide a no-slop fit to the miter track.* Through-slots in…

    85 Review(s)
    $25.99
  3. Kreg 90 Degree Corner Clamp

    Kreg 90 Degree Corner Clamp

    Clamping corners just got easier! This innovative holder lets you quickly square and secure individual joints on drawers, shelving, and more. Additional features:* Self-squaring design ensures precise results, every time. * Quick-adjust handle lets you make fast and easy adjustments on stock up to…

    10 Review(s)
    $34.99
  4. 105 Degree Stop Hinge-2 Inch

    105 Degree Stop Hinge-2 Inch

    Finish your project with a Jewelry Box Stop Hinge that is both durable and distinctive! This sturdy 105° hinge is an economical alternative to other hinges, easy to affix, and comes with all mounting hardware. Made of durable steel and available in three finishes: Nickel, Oil Rubbed Bronze, or…

    1 Review(s)
    $4.19
  5. 105 Degree Stop Hinge-8 Inch

    105 Degree Stop Hinge-8 Inch

    Finish your project with a Jewelry Box Stop Hinge that is both durable and distinctive! This sturdy 105° hinge is an economical alternative to other hinges, easy to affix, and comes with all mounting hardware. Made of durable steel and available in three finishes: Nickel, Oil Rubbed Bronze, or…

    From: $5.29
  6. 45/90 Degree Layout Miter Gauge

    45/90 Degree Layout Miter Gauge

    Make layout easier — scribe perfect 45° and 90° cutlines at the same time! Ideal for picture frames, corner molding, and various box constructions, this precise gauge also works to prep saw blades or drill presses for angled jobs. A balanced, wide-face design adds remarkable stability,…

    5 Review(s)
    $27.99
  7. 45 Degree Flush Elbow-Polished Brass

    45 Degree Flush Elbow-Polished Brass

    A 45° bend for flush railing. Features a 1" long sleeve for added strength and adhesive coverage. (Note: Hand rail fittings are supplied with self-drilling / self-tapping hardware.)Measurements (for use with 1-1/2" inch tubing):* width(W): 2-15/16"* length(L): 3"Measurements (for use with 2"…

    From: $28.99
  8. 90 Degree Flush Elbow-Polished Brass

    90 Degree Flush Elbow-Polished Brass

    A smooth 90° bend for flush railing. Features a 1" long sleeve for added strength and adhesive coverage. (Note: Hand rail fittings are supplied with self-drilling / self-tapping hardware.)Measurements (for use with 1-1/2" inch tubing):* width(W): 2-1/4"* length(L): 2-1/4"Measurements (for use…

    From: $19.49
  9. 30 Degree Chamfer Bead Profile Bit

    30 Degree Chamfer Bead Profile Bit

    This Rockler exclusive bit is a perfect fit for drawer fronts to complement raised panel doors, especially straight or Shaker-style raised panel doors. The flat field with steps on either side is a classic design common on old molding planes, but hard to find in router bit form.

    2 Review(s)
    $49.99
  10. Freud 90 Degree V Grooving Router Bits

    Freud 90 Degree V Grooving Router Bits

    For making signs and adding decorative accents to furniture and plaques. Freud's "V" grooving bits are designed to cut deep or shallow 90 degree "V" grooves. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and…

    From: $21.47
  11. 45 Degree Stainless Steel Miter Gauge

    45 Degree Stainless Steel Miter Gauge

    This solid steel gauge is perfect for quick miter layout and tool setup. Mark 45° linesfor picture frames, corner molding, box constructions and more. Stand it upright andprep saw blades or drill press tables for angled applications. The interior windowmakes marking parallel lines fast and easy.…

    $16.99
  12. 45/90 Degree Stainless Steel Miter Gauge

    45/90 Degree Stainless Steel Miter Gauge

    Used for precise 45° and 90° reference, this solid steel gauge has applications allover the shop. Lay out miters for picture frames or trim; set blade angles; check corners for square — the possibilities are endless. A sturdy base allows it to stand upright. Interior windows add…

    4 Review(s)
    $27.99
  13. Blum® 170 Degree Face Frame Hinge

    Blum® 170 Degree Face Frame Hinge

    Designed for face frame cabinets, these nickel-plated hinges offer a large 170° opening capacity for greater access to cabinet drawers and pullout shelves. Snap-closing action and clip-on assembly provide added performance and installation convenience. 35 mm hinge cup hole.

    9 Review(s)
    $16.19
  14. 45 Degree Flush Elbow-Polished Stainless Steel

    45 Degree Flush Elbow-Polished Stainless Steel

    A 45° bend for flush railing. Features a 1" long sleeve for added strength and adhesive coverage. (Note: Hand rail fittings are supplied with self-drilling / self-tapping hardware.)Measurements (for use with 1-1/2" inch tubing):* width(W): 2-15/16"* length(L): 3"Measurements (for use with 2"…

    From: $36.99
  15. 90 Degree Flush Elbow-Polished Stainless Steel

    90 Degree Flush Elbow-Polished Stainless Steel

    A smooth 90° bend for flush railing. Features a 1" long sleeve for added strength and adhesive coverage. (Note: Hand rail fittings are supplied with self-drilling / self-tapping hardware.)Measurements (for use with 1-1/2" inch tubing):* width(W): 2-1/4"* length(L): 2-1/4"Measurements (for use…

    From: $38.99
  16. 1/4" 8 Degree Carbide Tip Dovetail Bit, 1/8" shank

    1/4" 8 Degree Carbide Tip Dovetail Bit, 1/8" shank

    Replacement 1/4" carbide-tipped dovetail bit with a 1/8" shank for use with Rockler's Miniature Dovetail Template & Bit Kit (20618, sold separately). Requires 1/4"-to-1/8" collet adapter.

    $19.99
  17. Rockler 45 Degree Chamfer Router Bits-1/4 Inch Shank

    Rockler 45 Degree Chamfer Router Bits-1/4 Inch Shank

    Our Chamfer Bits are among the most useful and popular bits in our router bit lineup. Chamfer bits are extremely versatile, since the size of the chamfer can be easily varied by adjusting the depth of cut. For this reason, it can be cost effective to buy a larger chamfer bit, as even a very large…

    5 Review(s)
    From: $24.99
  18. Rockler 45 Degree Chamfer Router Bits-1/2 Inch Shank

    Rockler 45 Degree Chamfer Router Bits-1/2 Inch Shank

    Our Chamfer Bits are among the most useful and popular bits in our router bit lineup. Chamfer bits are extremely versatile, since the size of the chamfer can be easily varied by adjusting the depth of cut. For this reason, it can be cost effective to buy a larger chamfer bit, as even a very large…

    5 Review(s)
    From: $25.99
  19. 45-degree Dust Collection Fitting, 4'' Diameter

    45-degree Dust Collection Fitting, 4'' Diameter

    Great for getting your dust collection system around corners without losing efficiency. Helpful for horizontal and vertical changes in direction. Easily attaches to dust hose. Available in 4" and 2-1/2" sizes.

    $7.99
  20. 45-degree Dust Collection Fitting, 2-1/2'' Diameter

    45-degree Dust Collection Fitting, 2-1/2'' Diameter

    Great for getting your dust collection system around corners without losing efficiency. Helpful for horizontal and vertical changes in direction. Easily attaches to dust hose.

    $3.99
  21. Bevel Router Bit, 3/8'' x 7 Degree, 1/4'' Shank

    Bevel Router Bit, 3/8'' x 7 Degree, 1/4'' Shank

    When used as a laminate trimming bit, the bevel cleans up any excess adhesive, and also knocks down any sharp edges or slivers that remain. The bits feature 1/2" ball bearing guides to prevent any burning on the edge of your workpiece. 1/4" shanks.

    $19.99
  22. Bevel Router Bit, 3/8'' x 30 Degree, 1/4'' Shank

    Bevel Router Bit, 3/8'' x 30 Degree, 1/4'' Shank

    When used as a laminate trimming bit, the bevel cleans up any excess adhesive, and also knocks down any sharp edges or slivers that remain. The bits feature 1/2" ball bearing guides to prevent any burning on the edge of your workpiece. 1/4" shanks.

    $19.99
  23. Right Angle Button-Fix Panel Couplers, 4 Pairsv (Type 2 - 90 Degree)

    Right Angle Button-Fix Panel Couplers, 4 Pairsv (Type 2 - 90 Degree)

    If you're looking for a strong, fast way to secure a removable panel, look no further. Button-Fix® Panel Couplers lock your panels into place with a reassuring click, and require only a few screws to install. These Right Angle Couplers accommodate panels that are oriented at 90° to one…

    $6.99
  24. 11.25° Chamfer Router Bit

    11.25° Chamfer Router Bit

    This chamfer bit can be used to apply a beveled edge to cabinetry and furniture elements, or to chamfer the edge joints for multi-sided objects. With an 11.25 degree angle, it's perfectly suited for 16-sided barrels or columns, and you can also use it to build segmented turning blanks.

    1 Review(s)
    $34.99
  • Items 1 - 24 of 195
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X