Delta Sanding Center

  • Page:
    1. 1
  • Items 1 - 4 of 4
  • Page:
    1. 1
  • How-To Articles (4)
Product not found, but we found these articles.
  1. How to Make PVC Pipe Chisel and Lathe Tool Storage Panel / Rockler How-to

    How to Make PVC Pipe Chisel and Lathe Tool Storage Panel / Rockler How-to

    …place with screws. Cut the tilt stop (piece 4) to size and center it on the inside of the top edge of the panel. Extend the stop a bit past the panel edge to create an overlap, and screw it in place. (Note: Remember, this is for our Delta 1440 lathe ... your requirements may end up eliminating or…

  2. Sandor Nagyszalanczy Picks Delta as the Best of the Oscillating Spindle Sanders / Rockler How-to

    Sandor Nagyszalanczy Picks Delta as the Best of the Oscillating Spindle Sanders / Rockler How-to

    …gear mechanism. All OSS models feature interchangeable sanding drums of various diameters, for sanding concave curved areas of various radii. Selecting the largest diameter sanding drum that fits the radius of the workpiece makes it easier to sand curves smoothly. The five benchtop models come with…

  3. General International 15-220M1 Spindle Sander Has a Unique Tilting Table and a Powerful Motor / Rockler How-to

    General International 15-220M1 Spindle Sander Has a Unique Tilting Table and a Powerful Motor / Rockler How-to

    …than the next-closest-in-price Delta. To change the sanding drum on General spindle sanders, you must remove the entire drum assembly and replace it. Another thing that distinguishes the General from other OSS machines is its spindle setup: To change to a sanding drum of a different diameter, you…

  4. Delta 46-460 Benchtop Lathe Has Reversible Motor and Easy Drive Belt and Pulley Access / Rockler How-to

    Delta 46-460 Benchtop Lathe Has Reversible Motor and Easy Drive Belt and Pulley Access / Rockler How-to

    …securely. Delta provides a 6" tool-rest for tackling tight-quarter operations and a 10" rest for longer work; you'll use them both often. Every lathe should come with these two sizes. Not all do. Delta's lathe comes with a unique feature, a reversible motor, which really helps you when sanding down…

  • Page:
    1. 1
  • Items 1 - 4 of 4
  • Page:
    1. 1
Feedback X