Depth Collar

  • Grid List
  • Page:
    1. 1
  • Items 1 - 15 of 15
  • Page:
    1. 1
  1. 7-Pc. Split Collar Set

    7-Pc. Split Collar Set

    …proper collar diameter, slide it onto the drill bit, and tighten the single 1/8" hex screw. The split ring design tightens fully around the drill bit securing it in place. No damage to the drill's side edges or flutes will occur! Stop Collars allow you to set precise cutting depths on any…

    9 Review(s)
    $14.49
  2. Kreg® Deck Drill Bit/Depth Collar

    Kreg® Deck Drill Bit/Depth Collar

    Stepped drill bit design is made specifically for work with the Kreg® Deck Jig System (36613, sold separately). Includes a depth collar so your pilot holes will be uniform in diameter, depth, angle and position when you drill with the Deck Jig System. Also includes an allen wrench.

    $16.99
  3. Clamp Tite Drill Stop

    Clamp Tite Drill Stop

    …to control drilling depth. Unlike stop collars that use a single set screw, the split collar design applies tight, even pressure around the perimeter of the bit. Because of this, it resists loosening and shifting, which can mar the drill bit and unexpectedly change drilling depth. Use a 7/64" Allen…

    2 Review(s)
    $4.79
  4. Kreg Quick Change Kit

    Kreg Quick Change Kit

    …provides everythingyou need: an innovative Quick-Change Chuck, a 6" long #2 Square Driver, and thenew 3/8" Hex-Shank Pocket Hole Drill Bit (with depth collar and allen wrench). Additional features:* All new 3/8" Hex-Shank Step Drill Bit snaps directly into the Quick Change Chuck– no need for a…

    4 Review(s)
    $29.39
  5. Rockler/Insty-Drive Tapered Drill Bits and Countersinks

    Rockler/Insty-Drive Tapered Drill Bits and Countersinks

    …are removable and adjustable. Hex collars and hex shanks fit our Rockler exclusive Insty-Driver. Nine-piece countersink set shown includes 3 countersinks with tapered drill bits perfectly matched for #6, #8 and #10 screws, a 3/8" stop collar for countersink depth, #1 and #2 Phillips bits, #1 and #2…

    22 Review(s)
    From: $19.99
  6. Kreg Micro Pocket Depth Collar

    Kreg Micro Pocket Depth Collar

    The Micro Pocket™ Depth Collar for the Micro Pocket® Drill Guide (33984, sold separately) helps you drill pocket holes to the right depth every time.

    $2.39
  7. Inlay Bushing and Bit with Removable Collar

    Inlay Bushing and Bit with Removable Collar

    You can cut both the inlay and the opening with just one template. The inlay will fit into the opening with absolute precision. Maximum 3/16" depth of cut. Use with Porter Cable, Black and Decker and similar bases. Looking for a simple system to make inlaying faster and easier than ever? Check out…

    9 Review(s)
    $37.99
  8. Kreg Stop Collar/Hex Wrench

    Kreg Stop Collar/Hex Wrench

    Kreg Stop Collar/Hex Wrench for the Mini Kreg Jig and Kit (60370, sold separately) helps ensure precise depth of pocket holes. Works with any 3/8" Kreg pocket-hole drill bit.

    $4.19
  9. Adjustable Angle Ball Collar-Polished Brass

    Adjustable Angle Ball Collar-Polished Brass

    Attach railing at any angle!Measurements (for use with 1-1/2" inch tubing):* depth(D): 1-3/4"* height(H): 15/16"Measurements (for use with 2" inch tubing):* depth(D): 2-3/16"* height(H): 1"

    From: $13.49
  10. Adjustable Angle Ball Collar-Polished Stainless Steel

    Adjustable Angle Ball Collar-Polished Stainless Steel

    Attach railing at any angle!Measurements (for use with 1-1/2" inch tubing):* depth(D): 1-3/4"* height(H): 15/16"Measurements (for use with 2" inch tubing):* depth(D): 2-3/16"* height(H): 1"

    From: $18.49
  11. Kreg Micro Pocket Drill Guide

    Kreg Micro Pocket Drill Guide

    …the case this miniature drill guide is ideal. It has a 25% smaller hole diameter and includes a Micro Pocket™ Drill Guide, Drill Bit and Depth Collar, as well as a Starter Screw Set. Replacement accessories sold separately. Technical Details:* Fully compatible with the Kreg Jig® and Kreg…

    8 Review(s)
    $44.95
  12. Kreg R3 Pocket Hole System

    Kreg R3 Pocket Hole System

    …Hardened steel drill guides with lifetime warranty.* With wood chip relief holes and clamp adapter.* Kit includes the R3 Jig with a clamp pad adapter, step drill bit, depth collar and Allen wrench, 6" driver bit, and sample screws and plugs.* Comes in organized carrying case.* Clamp not included.

    32 Review(s)
    $39.95
  13. Rockler/Insty-Drive Tapered Drill Bits and Countersinks

    Rockler/Insty-Drive Tapered Drill Bits and Countersinks

    …are removable and adjustable. Hex collars and hex shanks fit our Rockler exclusive Insty-Driver. Nine-piece countersink set shown includes 3 countersinks with tapered drill bits perfectly matched for #6, #8 and #10 screws, a 3/8" stop collar for countersink depth, #1 and #2 Phillips bits, #1 and #2…

    22 Review(s)
    $40.49
  14. Rockler/Insty-Drive Tapered Drill Bits and Countersinks-Replacement Tapered Drill Bits

    Rockler/Insty-Drive Tapered Drill Bits and Countersinks-Replacement Tapered Drill Bits

    …are removable and adjustable. Hex collars and hex shanks fit our Rockler exclusive Insty-Driver. Nine-piece countersink set shown includes 3 countersinks with tapered drill bits perfectly matched for #6, #8 and #10 screws, a 3/8" stop collar for countersink depth, #1 and #2 Phillips bits, #1 and #2…

    22 Review(s)
    From: $7.99
  15. Kreg Toolboxx w/Pocket Hole Start Up Kit

    Kreg Toolboxx w/Pocket Hole Start Up Kit

    …ever got along without it. Kreg Large Toolboxx™: With removable bins for screws, fixed storage compartments for drill bits,drivers and stop collars, and a vast storage space below for jigs, clamps and drillguides, the Kreg Toolboxx is more than capable of housing your entire KregPocket Jig…

    $106.00
  • Grid List
  • Page:
    1. 1
  • Items 1 - 15 of 15
  • Page:
    1. 1
Feedback X