Dial Indicator

  • Grid List
  • Page:
    1. 1
  • Items 1 - 12 of 12
  • Page:
    1. 1
  1. Master Plate with Super Bar

    Master Plate with Super Bar

    …into a 5/8" or 1" arbor to provide a full 10" of near-perfect flatness for aligning your equipment. The Super Bar jig has an-onboard precision dial indicator that measures alignment as it slides in the miter gauge slot. This enables you to keep the saw blade parallel, align the fence, square tour…

    10 Review(s)
    From: $49.99
  2. 1-2-3 MicroGage

    1-2-3 MicroGage

    …tool steel and ground to 0.0002" for ultraprecision. Dial indicator has 1" travel with 0.001" accuracy. Includes a round tip for useon flat surfaces and a 3/8" diameter flat tip for use on round and sharp surfaces suchas jointer knives. Indicator carriage assembly slides smoothly along the entire…

    1 Review(s)
    $119.00
  3. Rockler Magnetic Jointer Jig

    Rockler Magnetic Jointer Jig

    …cutter heads just got easier! Magnetic bars hold jointer knives in place flush with the outfeed table on any 6" to 8" jointer bed. This jig is much quicker and easier than working with dial indicators. Allows quick shifting of knives to avoid damage and extend blade life. Solid steel construction.

    8 Review(s)
    $19.99
  4. Betterley UNA-GAUGE Universal Alignment and Adjustment Gauge

    Betterley UNA-GAUGE Universal Alignment and Adjustment Gauge

    …of .001" - simply "dial in" precise tool settings* Measurement range of 3" above and 2" below the reference surface* Miter slot attachment included for precise table-to-blade alignment* Modular design provides multiple vertical and horizontal positions for the dial indicator* Simple, tool-free…

    3 Review(s)
    $199.99
  5. Little Wizard II

    Little Wizard II

    …as for locating wood studs inside of walls. The Little Wizard is lightweight, rugged, and easy to operate. Indicators include a speaker and LED red lights. To operate, simply adjust the dial on the Little Wizard until the tone signal stops, position and move in a circular motion. A continuous tone…

    9 Review(s)
    $22.99
  6. Combi-Cam Lock Cylinder

    Combi-Cam Lock Cylinder

    …ability to reset combinations. Additional Features:* Pick-resistant keyways with over 50,000 key codes available* Easy to read dials and open and close indicators* Combination is set in 3 easy steps* Can be installed vertically or horizontally* Cam can be placed in 180 degree or 90 degree…

    $33.59
  7. Porter-Cable 18 Gauge 1-3/8'' Brad Nailer Kit, While Supplies Last!

    Porter-Cable 18 Gauge 1-3/8'' Brad Nailer Kit, While Supplies Last!

    …adjustments with convenient detents to dial in your setting quickly. The removable non-marring nose tip prevents scratching, while the rear exhaust keeps moisture in the lines from ending up on your project. The BN138 also comes equipped with a low-nail reload indicator to remind you when it's time…

    $74.99
  8. Combi-Cam Ultra Cam Lock

    Combi-Cam Ultra Cam Lock

    …ability to reset combinations. Additional Features:* Pick-resistant keyways with over 50,000 key codes available* Easy to read dials and open and close indicators* Combination is set in 3 easy steps* Can be installed vertically or horizontally* Cam can be placed in 180 degree or 90 degree…

    1 Review(s)
    $43.08
  9. Ready 2 Rout Electronic Fence Positioner with Free Touch Plate

    Ready 2 Rout Electronic Fence Positioner with Free Touch Plate

    …"smart" era. Woodworkers used to endlessly tapping and bumping their fences will appreciate the ease and simplicity of pressing only a few buttons to dial in a setting. Simply zero out the fence, and every adjustment afterwards is accomplished with the onboard touch-screen interface and a precision…

    3 Review(s)
    $599.99
  10. Porter-Cable 18 Gauge 2'' Brad Nailer Kit

    Porter-Cable 18 Gauge 2'' Brad Nailer Kit

    …adjustments with convenient detents to dial in your settingquickly. The removable non-marring nose tip prevents scratching, while therear exhaust keeps moisture in the lines from ending up on your project. TheBN200C also comes equipped with a low-nail reload indicator to remind youwhen it's time to…

    0 Review(s)
    $81.99
  11. Porter-Cable 3-1/2'' Round Head Framing Nailer Kit

    Porter-Cable 3-1/2'' Round Head Framing Nailer Kit

    …3-1/2" long, the Porter-Cable FR350B is a lightweight framing nailer with a powerful punch. With tool-free adjustable depth-of-drive, it's easy to dial in the proper set for your nail heads, and the selectable trigger features trigger lockout and contact actuation modes, plus a low-nail lockout…

    $215.99
  12. Porter-Cable 3-1/2'' Clipped-Head Framing Nailer Kit

    Porter-Cable 3-1/2'' Clipped-Head Framing Nailer Kit

    …3-1/2" long, the Porter-Cable FC350B is a lightweight framing nailer with a powerful punch. With tool-free adjustable depth-of-drive, it's easy to dial in the proper set for your nail heads, and the selectable trigger features trigger lockout and contact actuation modes, plus a low-nail lockout…

    $215.99
  • Grid List
  • Page:
    1. 1
  • Items 1 - 12 of 12
  • Page:
    1. 1
Feedback X