Diamond Wood

  • Items 1 - 24 of 45
  • Page:
    1. 1
    2. 2
  1. Diamond Carbide Mini Turning Tool

    Diamond Carbide Mini Turning Tool

    This Diamond Carbide Mini Turning Tool from Rockler features a replaceable and rotatable cutter that eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. The solid carbide cutter also…

    $69.99
  2. Full Size Diamond Ergonomic Carbide Turning Tool

    Full Size Diamond Ergonomic Carbide Turning Tool

    This Carbide Turning Tool from Rockler features a replaceable, rotatable cutter that eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. The solid carbide cutter stays sharp for longer…

    $99.99
  3. Diamond Carbide Turning Tool Replacement Cutter - D1

    Diamond Carbide Turning Tool Replacement Cutter - D1

    This solid carbide cutter was sharpened on a diamond wheel to 1500 grit, and can be rotated to give you a fresh edge in only seconds! Use it with the Diamond Carbide Mini Turning Tool or the Diamond Carbide Pen Turning Tool (both sold separately) to get smooth finishes in detailed areas, such as…

    $17.99
  4. Mahogany Black Maple Diamond Inlay Banding, 1/4'' W

    Mahogany Black Maple Diamond Inlay Banding, 1/4'' W

    Intricate solid wood inlays with delicate geometric patterns. Great for adding a decorative touch to jewelry boxes, table tops, picture frames and more. Inlay bandings are easy to apply. Simply rout out a groove with a straight router bit, glue in the banding, sand lightly, and seal. Bandings are…

    $20.49
  5. Full Size Diamond Carbide Replacement Cutter - D2

    Full Size Diamond Carbide Replacement Cutter - D2

    This solid carbide cutter was sharpened on a diamond wheel to 1500 grit, and can be rotated to give you a fresh edge in only seconds! Use it with the Full Size Diamond Carbide Turning Tool (49632, sold separately) to get smooth finishes in detailed areas, such as those in spindle turnings!…

    $19.99
  6. Robert Sorby Parting Tools

    Robert Sorby Parting Tools

    …reduces the amount of waste, vital if the timber is an expensive, exotic one. It also makes for a fine detailing tool, e.g. beads and fillets. Diamond Parting Tool - The special profile of this tool reduces the risk of binding in the cut. It also reduces the amount of heat build up caused by…

    From: $54.49
  7. Robert Sorby Square-End Scraper

    Robert Sorby Square-End Scraper

    For finishing convex and flat bottomed forms. For finishing convex and flat bottomed forms. The end profile can be modified to a specific shape as required, e.g. diamond point.

    2 Review(s)
    From: $69.99
  8. Sorby Hollowing Tool Replacement Tip

    Sorby Hollowing Tool Replacement Tip

    …through end grain easily and with maximum control. The HSS tip is built to last and may be easily resharpened using a diamond file for repeated useage! Technical Details:* HSS (High-Speed Steel) construction* Sharpened with a diamond hone for razor sharpness* May be resharpened when necessary

    $13.99
  9. Full Size Round Carbide Replacement Cutter - R2

    Full Size Round Carbide Replacement Cutter - R2

    This solid carbide cutter was sharpened on a diamond wheel to 1500 grit, and can be rotated to give you a fresh edge in only seconds! Use it with the Full Size Round Carbide Turning Tool (48723, sold separately) to get smooth finishes on curved, concave surfaces. Features:* R2 replacement cutter…

    $19.99
  10. Full Size Square Carbide Replacement Cutter - S2

    Full Size Square Carbide Replacement Cutter - S2

    This solid carbide cutter was sharpened on a diamond wheel to 1500 grit, and can be rotated to give you a fresh edge in only seconds! Use it with the Full Size Square Carbide Turning Tool (49318, sold separately) to smooth flat or convex surfaces. Features:* S2 replacement cutter measures…

    $19.99
  11. Fein MultiMaster MiniCut and File Set

    Fein MultiMaster MiniCut and File Set

    …MiniCut and File Set includes: 2 MiniCut Saw Blades for wood and soft plastics, 2 HSS MiniCut Saw Blades for hard plastics, fiberglass and sheet metal, 1 diamond file, and 1 carbide file. With the new carbide file insert grooves can be filed out cleanly - and wood and plastic completely deburred.

    1 Review(s)
    $36.99
  12. Square Carbide Mini Turning Tool Replacement Cutter - S1

    Square Carbide Mini Turning Tool Replacement Cutter - S1

    This solid carbide cutter was sharpened on a diamond wheel to 1500 grit, and can be rotated to give you a fresh edge in only seconds! Use it with the Square Carbide Mini Turning Tool (sold separately) for flat or convex areas on spindles and pen turnings. Technical Details:* Ideal for giving you a…

    $17.99
  13. 1-1/4'' Dish Carving Router Bit

    1-1/4'' Dish Carving Router Bit

    …that's been final sharpened with an 800 grit diamond wheel for smooth cutting. Use it to remove large amounts of wood with minimal effort. Perfect for making everything from trays and bowls to raised letter signs. * Ideal for removing large amounts of wood with minimal effort* 1/2" shank* K10 and…

    $42.99
  14. Robert Sorby Full Round Scraper Cutter

    Robert Sorby Full Round Scraper Cutter

    …is used for fine finishing. Recommended attachment for the Sorby Hollowmaster (Handled) and the Sorby Hollowmaster for the Sovereign System (Blade). Technical Details:* Made from High Speed Steel (HSS)* Cutter is easily sharpened with a diamond file and can be replaced as needed* Made in England

    $23.99
  15. Round Carbide Turning Tool Replacement Cutter -R1

    Round Carbide Turning Tool Replacement Cutter -R1

    This solid carbide cutter was sharpened on a diamond wheel to 1500 grit, and can be rotated to give you a fresh edge in only seconds! Use it with the Round Carbide Mini Turning Tool or the Round Carbide Pen Turning Tool (both sold separately) to get smooth finishes on concave surfaces! Technical…

    $17.99
  16. Carbide Mini Turning Tool 3-Piece Set

    Carbide Mini Turning Tool 3-Piece Set

    …Carbide cutters are not interchangeable between the different tools. * Diamond Carbide Mini Turning Tool is ideal for use as a parting tool, and for tight profiles. Overall length of the diamond cutter is 1-1/8". Angle of diamond cutter is approximately 35 degrees.* Square Carbide Mini Turning Tool…

    6 Review(s)
    $189.99
  17. Delta 46-625 6-Piece Lathe Turning Tool Set

    Delta 46-625 6-Piece Lathe Turning Tool Set

    …are high-quality heavy-duty tools. The carefully contoured solid wood handles fit comfortably in your hand, and at 11'' long, provide plenty of space for a secure two-handed grip. Set includes 1'' square end scraper, 3/16'' diamond section parting tool, 1/2'' round nose scraper, 3/4'' oval skew,…

    $205.99 $129.99

    SAVE 37%

  18. Robert Sorby Easybeader Woodturning Tools

    Robert Sorby Easybeader Woodturning Tools

    …boxes, and honey dippers. Because of its shape the turner can move quickly from one bead to the next safe in the knowledge that both size and spacing will be the same. Useful Tips:* When using an easybeader manipulate it like a scraper* Sharpen the easybeader with a diamond hone on the top face

    From: $45.49
  19. Steelman Pen Hardware Kit, Gold-Plated/Chrome

    Steelman Pen Hardware Kit, Gold-Plated/Chrome

    The top barrel is cut in a diamond pattern, and is very reflective. The hinged, spring-action pocket clip helps to prevent clip breakage, and makes it easy to clip the pen onto thicker items, such as folders or sheaves of paper. Features a smooth twist mechanism for retracting the tip. Available in…

    $13.99
  20. Robert Sorby Hollowmaster

    Robert Sorby Hollowmaster

    …Details:* 10" size* Unique Hollowmaster comes with a meaty 3/4" flat surface* Features swan neck design for hard to reach areas* Includes a swiveling hollowing cutter and a full round scraper cutter for fine finishing* Cutters are easily sharpened with a diamond file Sorby Hollowmaster Instructions

    1 Review(s)
    $101.99
  21. Carbide Roughing Tool

    Carbide Roughing Tool

    …- correct 16" solid hardwood handle and brass ferrule* Razor-sharp carbide cutter with 360° cutting surface* Cutter rotates giving you a new cutting surface - never needs sharpening* Sharpened on a diamond wheel of up to 1500 grit* Gives you a super - smooth finish on most materials

    16 Review(s)
    $65.99 $24.99

    SAVE 62%

  22. Steelman Pen Hardware Kit, Chrome/Chrome

    Steelman Pen Hardware Kit, Chrome/Chrome

    …jeweled appearance, the Steelman Pen Hardware Kit is just as likely to impress metalworkers as it is woodworkers. The top barrel is cut in a diamond pattern, and is very reflective. The hinged, spring-action pocket clip helps to prevent clip breakage, and makes it easy to clip the pen onto…

    $12.99
  23. Round End Swivel Tip (RS211C)

    Round End Swivel Tip (RS211C)

    …all rolled into one.* Scraper can be used on the half-round shank for shear scraping.* All three tips or cutters are HSS and sharpened with a diamond hone on the top.* Replacement cutters available.* Separate beading, coving, and recess cutters (also called dovetail cutters) available separately.*…

    4 Review(s)
    $20.99
  24. Tungsten Carbide Cutters for Robert Sorby TurnMaster System

    Tungsten Carbide Cutters for Robert Sorby TurnMaster System

    …can be sharpened, but require specialized diamond abrasives).* Carbide stays reasonably sharp for a longer period of time, but because of its coarse grain, can never be sharpened as finely as HSS.* Gives extended cutting life with the toughest of woods.* Sharpens to 0.7 - 1 microns.* Hardness: 90…

    $19.99
  • Items 1 - 24 of 45
  • Page:
    1. 1
    2. 2
Feedback X