Door Edge Bit

  • Items 1 - 24 of 52
  • Page:
    1. 1
    2. 2
    3. 3
  1. Freud No Lip Door Edge Bit

    Freud No Lip Door Edge Bit

    Creates a decorative inverted ogee profile on the face of door and drawer fronts. Also designed to compliment the profile created by the 99-064 Finger Pull door edge bit. Precise shear angles provide a splinter-free finish. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on…

    $57.47
  2. Custom Door Edge Router Bit

    Custom Door Edge Router Bit

    Our Custom Door Edge Router Bit matches the most popular profile used in the kitchen cabinetry industry today. It is both decorative and functional, featuring a cove on the face side of the door and a bevel toward the rear, which makes it easy to open the door without a pull.

    $59.99
  3. Classical Stile and Rail Router Bit Set

    Classical Stile and Rail Router Bit Set

    …this rail and stile router bit set to create beautiful door frames for glass panel, flat panel and raised panel doors. Rockler rail and stile bit sets are manufactured to exacting standards and create perfectly matched cope and stick joints. The one-piece cutting edge allows you to achieve a perfect…

    4 Review(s)
    $99.99
  4. Drawer Pull JIG IT® Template and Center Punch

    Drawer Pull JIG IT® Template and Center Punch

    …investment in drawers and doors -- with the JIG IT® for Drawer Pulls and Knobs.* The marking template offers spacing for boring of 2-1/2 inches, 3 inches, 3-1/2 inches, 3-3/4 inches, 4 inches, and the European 96mm size.* The handle lets you adjust your setback from the edge anywhere up to 4-1/2…

    22 Review(s)
    $19.99
  5. Freud 99-521 Quadra-Cut™ Ogee Raised Panel Bit

    Freud 99-521 Quadra-Cut™ Ogee Raised Panel Bit

    …for doors and paneling. It can also be used for decorative tops, plaques and molding. Freud's exclusive Quadra-Cut™ 4-cutter design provides the smoothest cuts possible. Two large cutters shear upward to carve out most of the cut, while two small cutters shear downward to clean up the edges

    $98.97
  6. Ogee Door Bit OE804

    Ogee Door Bit OE804

    This Ogee Door Router Bit is manufactured using the finest grade K20 tungsten carbide, and are silver brass welded for the strongest possible bone. We use a 600 grit diamond wheel on the final sharpening to produce the sharpest possible edge for a clean cut and long life. Plus, this bit matches the…

    $49.99
  7. Roman Ogee Bit OE822

    Roman Ogee Bit OE822

    …use a 600 grit diamond wheel on the final sharpening to produce the sharpest possible edge for a clean cut and long life. Plus, this bit matches the most popular profiles used in our exclusive custom cabinet door and cabinet drawer program, letting you create additional cabinetry or other matching…

    $42.99
  8. Decorative Ogee Bit OE869

    Decorative Ogee Bit OE869

    …use a 600 grit diamond wheel on the final sharpening to produce the sharpest possible edge for a clean cut and long life. Plus, this bit matches the most popular profiles used in our exclusive custom cabinet door and cabinet drawer program, letting you create additional cabinetry or other matching…

    1 Review(s)
    $54.99
  9. Specialty Molding Bit

    Specialty Molding Bit

    Whether for edge profiling tops or doors, or routing separate moldings, this router bit will give you impressive results. Rockler router bits are manufactured using the finest grade K20 tungsten carbide, and are silver brass welded for the strongest possible bone. We use a 600 grit diamond wheel on…

    $95.39
  10. Rockler Classical Roman Ogee Plunge Bits

    Rockler Classical Roman Ogee Plunge Bits

    Our Roman Ogee Plunge Bit can be used for any fluting application, and even for routing sign text, but it is perhaps most often used to create a panel door effect for painted MDF and solid wood. Roman Ogee in essence, the profile's radiused bottom gives a positive-negative effect to the cut shape of…

    1 Review(s)
    From: $23.99
  11. Rockler Round-Edge Matched Stile and Rail Bit Set

    Rockler Round-Edge Matched Stile and Rail Bit Set

    …a smooth, burn-free cut. Slot cutter can be easily removed. 1-5/8" overall diameter x 1" cutting length x 1/2" shank. 1-1/2" shank length. 5/8" bearing. Groove is 3/8" D x 1/4"H. For an easy way to set the bit height with perfect repeatability, try our Router Bit Set-Up Jig (53803, sold separately).

    1 Review(s)
    $109.99
  12. Twin Step Ogee Bit OE833

    Twin Step Ogee Bit OE833

    …use a 600 grit diamond wheel on the final sharpening to produce the sharpest possible edge for a clean cut and long life. Plus, this bit matches the most popular profiles used in our exclusive custom cabinet door and cabinet drawer program, letting you create additional cabinetry or other matching…

    $44.99
  13. Edge Beading Router Bit-1/4" Shank

    Edge Beading Router Bit-1/4" Shank

    With its integral 1/2" guide bearing, this beading bit is a snap to use. There is no need to set the depth of cut with a fence, and you can even use the bit without a router table at all. The bit also features a taller section at the top of the carbide, which allows you more freedom to adjust the…

    4 Review(s)
    From: $34.99
  14. Edge Beading Router Bits-1/2" Shank

    Edge Beading Router Bits-1/2" Shank

    …course, you can also adjust it flush if no step is desired. A classic profile for cabinet work and architectural features, it makes an ideal beaded molding for wrapping doors and drawer fronts. These bits feature 1/2" shanks, the ideal choice when more stability and the best cut quality are desired.

    4 Review(s)
    $34.99 From: $23.99

    SAVE 31%

  15. Drawer Pull Router Bit

    Drawer Pull Router Bit

    Use this bit to apply a comfortable finger recess around the edges of doors and drawers, useful when you want a clean look without knobs or other hardware. You can also use it to rout finger pull stock that is applied separately, and you can even use it as a decorative edge treatment for table tops…

    $49.99
  16. Cove Raised Panel Bit P602

    Cove Raised Panel Bit P602

    Use this Cove Raised Panel Bit (P602) with its integral guide bearing to raise both straight and arched top door panels! The bit cuts both the cove profile on the front of the panel and the recessed in the back of the panel in one pass, giving you a perfect panel edge thickness every time and a 1/4"…

    0 Review(s)
    $142.99
  17. 30 Degree Chamfer Bead Profile Bit

    30 Degree Chamfer Bead Profile Bit

    This Rockler exclusive bit is a perfect fit for drawer fronts to complement raised panel doors, especially straight or Shaker-style raised panel doors. The flat field with steps on either side is a classic design common on old molding planes, but hard to find in router bit form.

    2 Review(s)
    $49.99
  18. Bead Stile and Rail Router Bit Set

    Bead Stile and Rail Router Bit Set

    …this rail and stile router bit set to create beautiful door frames for glass panel, flat panel and raised panel doors. Rockler rail and stile bit sets are manufactured to exacting standards and create perfectly matched cope and stick joints. The one-piece cutting edge allows you to achieve a perfect…

    4 Review(s)
    $99.99
  19. Traditional Stile and Rail Router Bit Set

    Traditional Stile and Rail Router Bit Set

    …this rail and stile router bit set to create beautiful door frames for glass panel, flat panel and raised panel doors. Rockler rail and stile bit sets are manufactured to exacting standards and create perfectly matched cope and stick joints. The one-piece cutting edge allows you to achieve a perfect…

    4 Review(s)
    $99.99
  20. Straight Panel Bit with Back Cutter P636

    Straight Panel Bit with Back Cutter P636

    …sharpest possible edge for a clean cut and long life. Plus, this bit matches the most popular profiles used in our exclusive custom cabinet door and cabinet drawer program, letting you create additional cabinetry or other matching pieces. * Cuts both straight and arched top door panels.* Cuts the…

    $142.99
  21. Freud Rail & Stile Profile Bit

    Freud Rail & Stile Profile Bit

    …use the Freud 99-062 bit or an equivalent slot cutter set up in your router table to mill the remaining elements of the profiles. Of course, the bit can also be used as an edge profiling bit, and makes a perfect match for the outside edge of your stile and rail doors.* Cuts all composition…

    $53.97
  22. Ogee Stile and Rail Bit Set

    Ogee Stile and Rail Bit Set

    These top-quality bits give you the high-performance you're looking for when creating ogee profile cope-and-stick door frames. The K10 and K20 grade carbide edges cut quickly and cleanly, keeping your router on track for a precision cut. Pair them with 1/4" flat panels or matching ogee raised panels…

    $99.99
  23. Freud 99-513 Quadra-Cut™ Ogee Raised Panel Bit

    Freud 99-513 Quadra-Cut™ Ogee Raised Panel Bit

    …panel raiser creates beautiful raised panels for doors and wainscot paneling, but can also be used to shape table tops, plaques and molding. Revolutionary Quadra-Cut™ design combines two small wings that cut downward to shear the top edge for a splinter-free surface, and two large wings that…

    1 Review(s)
    $98.97
  24. Freud® #99-510 Quadra-Cut Ogee Raised-Panel Bit

    Freud® #99-510 Quadra-Cut Ogee Raised-Panel Bit

    …2-3/4" diameter cutter for creating raised panels for doors and wainscoting, as well as decorative tops, plaques and molding. Freud's exclusive Quadra-Cut™ four-cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult…

    $98.97
  • Items 1 - 24 of 52
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X