Door Edge Router

  • Items 1 - 24 of 54
  • Page:
    1. 1
    2. 2
    3. 3
  1. Rockler OE804 Ogee Door Router Bit - 1-5/8" Dia x 1/2" H x 1/2" Shank

    Rockler OE804 Ogee Door Router Bit - 1-5/8" Dia x 1/2" H x 1/2" Shank

    This Ogee Door Router Bit is manufactured using the finest grade K20 tungsten carbide, and are silver brass welded for the strongest possible bone. We use a 600 grit diamond wheel on the final sharpening to produce the sharpest possible edge for a clean cut and long life. Plus, this bit matches the…

    $49.99
  2. Rockler Custom Door Edge Router Bit - 1-5/8" Dia x 1" H x 1/2" Shank

    Rockler Custom Door Edge Router Bit - 1-5/8" Dia x 1" H x 1/2" Shank

    Our Custom Door Edge Router Bit matches the most popular profile used in the kitchen cabinetry industry today. It is both decorative and functional, featuring a cove on the face side of the door and a bevel toward the rear, which makes it easy to open the door without a pull.

    $59.99
  3. Freud® 99-063 No Lip Door Edge Router Bit - 1-3/4" Dia x 5/8" H x 1/2" Shank

    Freud® 99-063 No Lip Door Edge Router Bit - 1-3/4" Dia x 5/8" H x 1/2" Shank

    …the face of door and drawer fronts. Also designed to compliment the profile created by the 99-064 Finger Pull door edge bit. Precise shear angles provide a splinter-free finish. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers.

    $57.47
  4. Rockler Edge Beading Router Bits - 1/4" Shank

    Rockler Edge Beading Router Bits - 1/4" Shank

    …guide bearing, this beading bit is a snap to use. There is no need to set the depth of cut with a fence, and you can even use the bit without a router table at all. The bit also features a taller section at the top of the carbide, which allows you more freedom to adjust the size of the upper step.…

    4 Review(s)
    From: $34.99
  5. Rockler Edge Beading Router Bits - 1/2" Shank

    Rockler Edge Beading Router Bits - 1/2" Shank

    …guide bearing, this beading bit is a snap to use. There is no need to set the depth of cut with a fence, and you can even use the bit without a router table at all. The bit also features a taller section at the top of the carbide, which allows you more freedom to adjust the size of the upper step.…

    4 Review(s)
    $34.99 From: $26.24

    SAVE 25%

  6. Routers and Router Tables (Book)

    Routers and Router Tables (Book)

    …of all router jigs: the router table. With Fine Woodworking Routers and Router Tables you'll be a router pro in no time. Technical Details:* 172 pages* SoftcoverLearn how to:* Cut edge profiles, joinery, and curves quickly and cleanly.* Create flawless moldings.* Make perfect raised-panel doors.*

    $21.95
  7. Rockler Flush Door Trimming Router Bit - 3/4" Dia x 2" H x 1/2" Shank

    Rockler Flush Door Trimming Router Bit - 3/4" Dia x 2" H x 1/2" Shank

    …carbide, this bit is ideally suited for trimming thick entry doors, interior doors and countertops. It features a top-mounted guide bearing, which lets you use templates on the top side. This means better visibility when hand-holding the router. The bit is 3/4" in diameter, and features two flutes…

    6 Review(s)
    $44.99
  8. Rockler Cove Router Bits - 1/4" Shank

    Rockler Cove Router Bits - 1/4" Shank

    Use for an elegant edge on drawer fronts, cabinet doors, furniture pieces and molding trim. Features an upward shear angle for more efficient and smoother cutting. Available in a range of radiuses to suit your application. 1/2" shanks provide the smoothest possible finished cut.* Two flutes.* 3/8"…

    2 Review(s)
    From: $24.99
  9. Rockler Cove Router Bits - 1/2" Shank

    Rockler Cove Router Bits - 1/2" Shank

    Use for an elegant edge on drawer fronts, cabinet doors, furniture pieces and molding trim. Features an upward shear angle for more efficient and smoother cutting. Available in a range of radiuses to suit your application. 1/2" shanks provide the smoothest possible finished cut.* Two flutes.* 3/8"…

    2 Review(s)
    $26.99 From: $20.24

    SAVE 25%

  10. Freud® 99-863 Double Side Door Cutters Set Router Bit - 1-11/16" Dia x 9/16" H x 1/2" Shank

    Freud® 99-863 Double Side Door Cutters Set Router Bit - 1-11/16" Dia x 9/16" H x 1/2" Shank

    …double-sided doors has never been easier! This optional cutter for double-sided doors matches the bevel profile of Freud's 99-763 Stile and Rail Bit Set (32427, sold separately). The result affords you even more creative freedom by letting you build custom frame and panel doors with decorative edges

    $101.97
  11. Freud® 99-861 Double Side Door Cutters Set Router Bit - 1-11/16" Dia x 9/16" H x 1/2" Shank

    Freud® 99-861 Double Side Door Cutters Set Router Bit - 1-11/16" Dia x 9/16" H x 1/2" Shank

    …ogee doors has never been easier! This optional cutter for double-sided doors matches the ogee profile of Freud's 99-761 Stile and Rail Bit Set (37161, sold separately). The result affords you even more creative freedom by letting you build custom frame and panel doors with decorative edges on both…

    $101.97
  12. Rockler Classical Roman Ogee Plunge Router Bits - 1/2" Shank

    Rockler Classical Roman Ogee Plunge Router Bits - 1/2" Shank

    …text, but it is perhaps most often used to create a panel door effect for painted MDF and solid wood. Roman Ogee in essence, the profile's radiused bottom gives a positive-negative effect to the cut shape of successive passes. It is also a great option for creating edge moldings. Twin-flute cutters.

    1 Review(s)
    From: $23.99
  13. Rockler Restoration Beading Router Bits - 1/2" Shank

    Rockler Restoration Beading Router Bits - 1/2" Shank

    …sizes to suit many applications. Use the smaller bits to make beaded trim moldings, and the larger bits for bull-nosed edges on thicker stock. A 1/4" beaded molding mitered around doors and drawer fronts adds a subtle and strikingly attractive effect. In bullnosing applications, a beading bit gives…

    2 Review(s)
    From: $26.99
  14. Rockler Large Trim for 2" Thick Doors Router Bit - 1" Dia x 2" H x 1/2" Shank

    Rockler Large Trim for 2" Thick Doors Router Bit - 1" Dia x 2" H x 1/2" Shank

    …amount of wood off of doors and large panels, this kit will save you a lot of tedious setups and backaches. The kit uses a razor-sharp shear-cutting bit along with different bearing combinations to remove exactly 1/16", 1/8", or 3/16" of material in just two router passes-all without a straightedge!…

    5 Review(s)
    $89.99
  15. Rockler Small Trim for 1" Thick Doors Router Bit - 3/4" Dia x 1" H x 1/2" Shank

    Rockler Small Trim for 1" Thick Doors Router Bit - 3/4" Dia x 1" H x 1/2" Shank

    …amount of wood off of doors and large panels, this kit will save you a lot of tedious setups and backaches. The kit uses a razor-sharp shear-cutting bit along with different bearing combinations to remove exactly 1/16", 1/8", or 3/16" of material in just two router passes-all without a straightedge!…

    5 Review(s)
    $49.99
  16. Freud® Quadra-Cut™ Cove Raised Panel Router Bits - 1/2" Shank

    Freud® Quadra-Cut™ Cove Raised Panel Router Bits - 1/2" Shank

    …clean edges every time, even with cross-grain cuts in difficult materials. Application: Ideal for creating raised panels for doors and paneling, as well as decorative tops, plaques and molding* Revolutionary Quadra-Cut™design combines two small wings that cut downward to shear the top edge for…

    2 Review(s)
    From: $104.47
  17. Freud® Quadra-Cut™ Bevel Raised Panel Router Bits - 1/2" Shank

    Freud® Quadra-Cut™ Bevel Raised Panel Router Bits - 1/2" Shank

    …4-cutter design, which provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Application: Ideal for creating raised panels for doors and paneling, as well as for beveling decorative tops, plaques and molding* Revolutionary…

    1 Review(s)
    From: $98.97
  18. Rockler Specialty Molding Router Bit - 2-1/8" Dia x 1" H x 1/2" Shank

    Rockler Specialty Molding Router Bit - 2-1/8" Dia x 1" H x 1/2" Shank

    Whether for edge profiling tops or doors, or routing separate moldings, this router bit will give you impressive results. Rockler router bits are manufactured using the finest grade K20 tungsten carbide, and are silver brass welded for the strongest possible bone. We use a 600 grit diamond wheel on…

    $95.39
  19. Rockler 3 Wing Slotting Cutters Router Bits - 1/4" Shank

    Rockler 3 Wing Slotting Cutters Router Bits - 1/4" Shank

    These slot cutters feature a 22mm bearing set to cut 1/2" deep into the edge of your material. With the slot width of your choice, you can create slots and grooves for frame and panel doors, picture frames, glass retainer and more. The 3-wing design provides a smooth cut and a longer cutting life.…

    15 Review(s)
    $35.99
  20. Rockler 3 Wing Slotting Cutters Router Bits - 1/2" Shank

    Rockler 3 Wing Slotting Cutters Router Bits - 1/2" Shank

    These slot cutters feature a 22mm bearing set to cut 1/2" deep into the edge of your material. With the slot width of your choice, you can create slots and grooves for frame and panel doors, picture frames, glass retainer and more. The 3-wing design provides a smooth cut and a longer cutting life.…

    14 Review(s)
    $36.99
  21. Freud® 91-108 9-Pc. Basic Router Bit Set - 1/2" Shank

    Freud® 91-108 9-Pc. Basic Router Bit Set - 1/2" Shank

    Make your joinery and edge profiles look equally sharp with this 9-Piece Basic Router Bit Set from Freud. With a dovetail bit, three straight bits and a rabbeting bit, you'll have the capability of cutting a full suite of high-quality joints. Use the flush trim bit to trim any veneers, laminates or…

    $176.47
  22. Rockler 30° Chamfer Bead Profile Router Bit - 1-1/4" Dia x 9/16" H x 1/2" Shank

    Rockler 30° Chamfer Bead Profile Router Bit - 1-1/4" Dia x 9/16" H x 1/2" Shank

    This Rockler exclusive bit is a perfect fit for drawer fronts to complement raised panel doors, especially straight or Shaker-style raised panel doors. The flat field with steps on either side is a classic design common on old molding planes, but hard to find in router bit form.

    2 Review(s)
    $49.99
  23. Rockler Round-Edge Matched Stile and Rail Router Bit Set - 1-5/8" Dia x 1" H x 1/2" Shank

    Rockler Round-Edge Matched Stile and Rail Router Bit Set - 1-5/8" Dia x 1" H x 1/2" Shank

    …a smooth, burn-free cut. Slot cutter can be easily removed. 1-5/8" overall diameter x 1" cutting length x 1/2" shank. 1-1/2" shank length. 5/8" bearing. Groove is 3/8" D x 1/4"H. For an easy way to set the bit height with perfect repeatability, try our Router Bit Set-Up Jig (53803, sold separately).

    1 Review(s)
    $109.99
  24. Rockler OE869 Decorative Ogee Router Bit - 1-5/8" Dia x 3/8" H x 1/2" Shank

    Rockler OE869 Decorative Ogee Router Bit - 1-5/8" Dia x 3/8" H x 1/2" Shank

    This Decorative Ogee Router Bit is manufactured using the finest grade K20 tungsten carbide, and are silver brass welded for the strongest possible bone. We use a 600 grit diamond wheel on the final sharpening to produce the sharpest possible edge for a clean cut and long life. Plus, this bit…

    1 Review(s)
    $54.99
  • Items 1 - 24 of 54
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X