Door Edge Router Bit

  • Items 1 - 24 of 53
  • Page:
    1. 1
    2. 2
    3. 3
  1. Rockler OE833 Twin Step Ogee Router Bit - 1-1/4" Dia x 3/8" H x 1/2" Shank

    Rockler OE833 Twin Step Ogee Router Bit - 1-1/4" Dia x 3/8" H x 1/2" Shank

    …Twin Step Ogee Router Bit is manufactured using the finest grade K20 tungsten carbide, and is silver brass welded for the strongest possible bone. We use a 600 grit diamond wheel on the final sharpening to produce the sharpest possible edge for a clean cut and long life. Plus, this bit matches the…

    $44.99
  2. Rockler Custom Door Edge Router Bit - 1-5/8" Dia x 1" H x 1/2" Shank

    Rockler Custom Door Edge Router Bit - 1-5/8" Dia x 1" H x 1/2" Shank

    Our Custom Door Edge Router Bit matches the most popular profile used in the kitchen cabinetry industry today. It is both decorative and functional, featuring a cove on the face side of the door and a bevel toward the rear, which makes it easy to open the door without a pull.

    $59.99
  3. Rockler Round-Edge Matched Stile and Rail Router Bit Set - 1-5/8" Dia x 1" H x 1/2" Shank

    Rockler Round-Edge Matched Stile and Rail Router Bit Set - 1-5/8" Dia x 1" H x 1/2" Shank

    …a smooth, burn-free cut. Slot cutter can be easily removed. 1-5/8" overall diameter x 1" cutting length x 1/2" shank. 1-1/2" shank length. 5/8" bearing. Groove is 3/8" D x 1/4"H. For an easy way to set the bit height with perfect repeatability, try our Router Bit Set-Up Jig (53803, sold separately).

    1 Review(s)
    $109.99
  4. Rockler Traditional Stile and Rail Router Bit - 1-3/8" Dia x 1" H x 1/2" Shank

    Rockler Traditional Stile and Rail Router Bit - 1-3/8" Dia x 1" H x 1/2" Shank

    Use this rail and stile router bit set to create beautiful door frames for glass panel, flat panel and raised panel doors. Rockler rail and stile bit sets are manufactured to exacting standards and create perfectly matched cope and stick joints. The one-piece cutting edge allows you to achieve a…

    4 Review(s)
    $99.99
  5. Rockler 3-Pc. Shaker Raised Panel Router Bit Set - 1/2" Shank

    Rockler 3-Pc. Shaker Raised Panel Router Bit Set - 1/2" Shank

    …quality door bit set lets you cut both the cope and stick joints for the door frame, as well as the raised panel that fits into the groove. The Shaker style profile features a simple chamfer along the inside edges of the frame, as well as on the panel. 1/2" shank router bits with high-grade…

    $209.99
  6. Rockler 3 Wing Slotting Cutters Router Bits - 1/4" Shank

    Rockler 3 Wing Slotting Cutters Router Bits - 1/4" Shank

    …set to cut 1/2" deep into the edge of your material. With the slot width of your choice, you can create slots and grooves for frame and panel doors, picture frames, glass retainer and more. The 3-wing design provides a smooth cut and a longer cutting life. Top quality bits that meet the high demands…

    15 Review(s)
    $35.99
  7. Rockler OE822 Roman Ogee Router Bit - 1-1/8" Dia x 3/8" H x 1/2" Shank

    Rockler OE822 Roman Ogee Router Bit - 1-1/8" Dia x 3/8" H x 1/2" Shank

    This Roman Ogee Router Bit is manufactured using the finest grade K20 tungsten carbide, and is silver brass welded for the strongest possible bone. We use a 600 grit diamond wheel on the final sharpening to produce the sharpest possible edge for a clean cut and long life. Plus, this bit matches the…

    $42.99
  8. Freud® 99-566 Quadra-Cut™ Bevel Raised Panel with Back Cutters Router Bit - 3-1/2" Dia x 1" H x 1/2" Shank

    Freud® 99-566 Quadra-Cut™ Bevel Raised Panel with Back Cutters Router Bit - 3-1/2" Dia x 1" H x 1/2" Shank

    …allows these bits to produce a full 1-1/2" wide reveal for traditional raised panel doors.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on table-mounted portable routers. Application: Producing panels from 3/4" stock that are flush with the door frame for a professional,…

    1 Review(s)
    $119.97
  9. Rockler OE869 Decorative Ogee Router Bit - 1-5/8" Dia x 3/8" H x 1/2" Shank

    Rockler OE869 Decorative Ogee Router Bit - 1-5/8" Dia x 3/8" H x 1/2" Shank

    …Decorative Ogee Router Bit is manufactured using the finest grade K20 tungsten carbide, and are silver brass welded for the strongest possible bone. We use a 600 grit diamond wheel on the final sharpening to produce the sharpest possible edge for a clean cut and long life. Plus, this bit matches the…

    1 Review(s)
    $54.99
  10. Rockler OE804 Ogee Door Router Bit - 1-5/8" Dia x 1/2" H x 1/2" Shank

    Rockler OE804 Ogee Door Router Bit - 1-5/8" Dia x 1/2" H x 1/2" Shank

    This Ogee Door Router Bit is manufactured using the finest grade K20 tungsten carbide, and are silver brass welded for the strongest possible bone. We use a 600 grit diamond wheel on the final sharpening to produce the sharpest possible edge for a clean cut and long life. Plus, this bit matches the…

    $49.99
  11. Freud® 99-863 Double Side Door Cutters Set Router Bit - 1-11/16" Dia x 9/16" H x 1/2" Shank

    Freud® 99-863 Double Side Door Cutters Set Router Bit - 1-11/16" Dia x 9/16" H x 1/2" Shank

    …double-sided doors has never been easier! This optional cutter for double-sided doors matches the bevel profile of Freud's 99-763 Stile and Rail Bit Set (32427, sold separately). The result affords you even more creative freedom by letting you build custom frame and panel doors with decorative edges

    $101.97
  12. Freud® Quadra-Cut™ Cove Raised Panel Router Bits - 1/2" Shank

    Freud® Quadra-Cut™ Cove Raised Panel Router Bits - 1/2" Shank

    …clean edges every time, even with cross-grain cuts in difficult materials. Application: Ideal for creating raised panels for doors and paneling, as well as decorative tops, plaques and molding* Revolutionary Quadra-Cut™design combines two small wings that cut downward to shear the top edge for…

    2 Review(s)
    From: $104.47
  13. Rockler Rail Coping Jig

    Rockler Rail Coping Jig

    …Rail Coping Jig for rail and stile doors of cabinets, windows and more to make clean cope cuts without blowouts - perfect for narrow cross-grain rail cuts. If you're after a cabinet door jig, look no further! Simply align material flush with the outside edge of the guide block and lock into place…

    117 Review(s)
    $59.99 $44.99

    SAVE 25%

  14. Rockler Small Trim for 1" Thick Doors Router Bit - 3/4" Dia x 1" H x 1/2" Shank

    Rockler Small Trim for 1" Thick Doors Router Bit - 3/4" Dia x 1" H x 1/2" Shank

    …amount of wood off of doors and large panels, this kit will save you a lot of tedious setups and backaches. The kit uses a razor-sharp shear-cutting bit along with different bearing combinations to remove exactly 1/16", 1/8", or 3/16" of material in just two router passes-all without a straightedge!…

    5 Review(s)
    $49.99
  15. Rockler Drawer Pull Router Bit - 1-3/8" Dia x 7/8" H x 1/2" Shank

    Rockler Drawer Pull Router Bit - 1-3/8" Dia x 7/8" H x 1/2" Shank

    Use this bit to apply a comfortable finger recess around the edges of doors and drawers, useful when you want a clean look without knobs or other hardware. You can also use it to rout finger pull stock that is applied separately, and you can even use it as a decorative edge treatment for table tops…

    $49.99
  16. Rockler P636 Straight Panel with Back Cutter Router Bit - 3-1/2" Dia x 1/2" H x 1/2" Shank

    Rockler P636 Straight Panel with Back Cutter Router Bit - 3-1/2" Dia x 1/2" H x 1/2" Shank

    …both straight and arched top door panels! Cuts both the profile on the front of the panel and the rabbet in the back of the panel in one pass, giving you a perfect panel edge thickness every time and a 1/4" tongue for precise fitting rails and stiles. Rockler router bits are manufactured using the…

    $142.99
  17. Freud® 99-063 No Lip Door Edge Router Bit - 1-3/4" Dia x 5/8" H x 1/2" Shank

    Freud® 99-063 No Lip Door Edge Router Bit - 1-3/4" Dia x 5/8" H x 1/2" Shank

    …the face of door and drawer fronts. Also designed to compliment the profile created by the 99-064 Finger Pull door edge bit. Precise shear angles provide a splinter-free finish. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers.

    $57.47
  18. Freud® 99-061 Rail & Stile Profile Router Bit - 1-1/2" Dia x 3/8" H x 1/2" Shank

    Freud® 99-061 Rail & Stile Profile Router Bit - 1-1/2" Dia x 3/8" H x 1/2" Shank

    …use the Freud 99-062 bit or an equivalent slot cutter set up in your router table to mill the remaining elements of the profiles. Of course, the bit can also be used as an edge profiling bit, and makes a perfect match for the outside edge of your stile and rail doors.* Cuts all composition…

    $53.97
  19. Freud® 91-108 9-Pc. Basic Router Bit Set - 1/2" Shank

    Freud® 91-108 9-Pc. Basic Router Bit Set - 1/2" Shank

    Make your joinery and edge profiles look equally sharp with this 9-Piece Basic Router Bit Set from Freud. With a dovetail bit, three straight bits and a rabbeting bit, you'll have the capability of cutting a full suite of high-quality joints. Use the flush trim bit to trim any veneers, laminates or…

    $176.47
  20. Freud® Quadra-Cut™ Bevel Raised Panel Router Bits - 1/2" Shank

    Freud® Quadra-Cut™ Bevel Raised Panel Router Bits - 1/2" Shank

    …4-cutter design, which provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Application: Ideal for creating raised panels for doors and paneling, as well as for beveling decorative tops, plaques and molding* Revolutionary…

    1 Review(s)
    From: $98.97
  21. Rockler Cove Router Bits - 1/2" Shank

    Rockler Cove Router Bits - 1/2" Shank

    Use for an elegant edge on drawer fronts, cabinet doors, furniture pieces and molding trim. Features an upward shear angle for more efficient and smoother cutting. Available in a range of radiuses to suit your application. 1/2" shanks provide the smoothest possible finished cut.* Two flutes.* 3/8"…

    2 Review(s)
    $26.99 From: $20.24

    SAVE 25%

  22. Freud® 99-513 Quadra-Cut™ Ogee Raised Panel Router Bit - 2-3/4" Dia x 5/8" H x 1/2" Shank

    Freud® 99-513 Quadra-Cut™ Ogee Raised Panel Router Bit - 2-3/4" Dia x 5/8" H x 1/2" Shank

    …panel raiser creates beautiful raised panels for doors and wainscot paneling, but can also be used to shape table tops, plaques and molding. Revolutionary Quadra-Cut™ design combines two small wings that cut downward to shear the top edge for a splinter-free surface, and two large wings that…

    1 Review(s)
    $98.97
  23. Rockler 30° Chamfer Bead Profile Router Bit - 1-1/4" Dia x 9/16" H x 1/2" Shank

    Rockler 30° Chamfer Bead Profile Router Bit - 1-1/4" Dia x 9/16" H x 1/2" Shank

    This Rockler exclusive bit is a perfect fit for drawer fronts to complement raised panel doors, especially straight or Shaker-style raised panel doors. The flat field with steps on either side is a classic design common on old molding planes, but hard to find in router bit form.

    2 Review(s)
    $49.99
  24. Freud® 99-569 Quadra-Cut™ Cove Raised Panel with Back Cutters Router Bit - 3-1/2" Dia x 1" H x 1/2" Shank

    Freud® 99-569 Quadra-Cut™ Cove Raised Panel with Back Cutters Router Bit - 3-1/2" Dia x 1" H x 1/2" Shank

    …You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Use this panel raiser to mill panels from 3/4" stock that are flush with the door frame for a professional, architecturally correct appearance. The cove profile raised panel bit also includes a back cutter…

    4 Review(s)
    $119.97
  • Items 1 - 24 of 53
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X