Door Making Router Bits

  • Items 1 - 24 of 31
  • Page:
    1. 1
    2. 2
  1. Freud Entry/Interior Door Ogee Bit Set

    Freud Entry/Interior Door Ogee Bit Set

    Build custom doors with mortise and tenon structure that will last a lifetime! Matched ogee profile bits come fully assembled and ready to make beautiful rail and stile joints. Mill a tenon of any length simply by unscrewing the top cutter and bearing of the rail bit from the lower cutter and shank.…

    $207.97
  2. Rockler Classical Reversible Rail & Stile Bit

    Rockler Classical Reversible Rail & Stile Bit

    …who make cabinet doors only occasionally, this cutter provides an affordable, space-saving solution to routing cope and stick joints. One bit cuts both rail and stile profiles; just remove the cutters and rearrange them to go from coping rail ends to routing grooves in the stiles. Because the bit is…

    1 Review(s)
    $69.99
  3. Freud 99-863 Cutters Double Side Door Set

    Freud 99-863 Cutters Double Side Door Set

    Making double-sided doors has never been easier! This optional cutter for double-sided doors matches the bevel profile of Freud's 99-763 Stile and Rail Bit Set (32427, sold separately). The result affords you even more creative freedom by letting you build custom frame and panel doors with…

    $101.97
  4. Freud 99-861 Cutters Double Sided Door Set

    Freud 99-861 Cutters Double Sided Door Set

    Making double-sided ogee doors has never been easier! This optional cutter for double-sided doors matches the ogee profile of Freud's 99-761 Stile and Rail Bit Set (37161, sold separately). The result affords you even more creative freedom by letting you build custom frame and panel doors with…

    $101.97
  5. Rockler Tongue and Groove Router Bit, 3/8" Cutter Width X 1/4" Cutter Height, 1/4" Shank

    Rockler Tongue and Groove Router Bit, 3/8" Cutter Width X 1/4" Cutter Height, 1/4" Shank

    …perfectly fitting tongue and groove joints. Use it to machine flat panel doors and cabinet panels, to create tongue and groove wainscoting, or just for edge joining long boards or cabinet components. The guide bearings make it easy to get a consistent depth of cut, and also allow you to machine…

    10 Review(s)
    $57.99
  6. Freud® 2-pc. Entry & Interior Router Bit Set

    Freud® 2-pc. Entry & Interior Router Bit Set

    router bit set to build beautiful custom entry doors and interior passage doors. With true rail-and-stile construction, you'll get rock-solid joints that last a lifetime. The bits are larger than standard rail and stile bits, and are capable of cutting joints for doors up to 1-3/4" thick. To make

    1 Review(s)
    $199.97
  7. Rockler Chamfer Reversible Rail & Stile Bit

    Rockler Chamfer Reversible Rail & Stile Bit

    …who make cabinet doors only occasionally, this cutter provides an affordable, space-saving solution to routing cope and stick joints. One bit cuts both rail and stile profiles; just remove the cutters and rearrange them to go from coping rail ends to routing grooves in the stiles. Because the bit is…

    1 Review(s)
    $69.99
  8. Freud 99-864 Cutters Double Side Door Set

    Freud 99-864 Cutters Double Side Door Set

    doors that will be visible from both sides! Two add-on cutters are included, one for the rail cutter, and one for the stile cutter. Both allow you to make double profile doors with variable thicknesses and long tenons. The cutters are machined to precisely match the Freud 99-764 rail and stile bit

    0 Review(s)
    $101.97
  9. Rockler Ogee Reversible Rail & Stile Bit

    Rockler Ogee Reversible Rail & Stile Bit

    …who make cabinet doors only occasionally, this cutter provides an affordable, space-saving solution to routing cope and stick joints. One bit cuts both rail and stile profiles; just remove the cutters and rearrange them to go from coping rail ends to routing grooves in the stiles. Because the bit is…

    2 Review(s)
    $69.99
  10. Freud Entry Door Cove/Bead Style Bit Set

    Freud Entry Door Cove/Bead Style Bit Set

    This bit system is designed to build doors with true mortise and tenon structure that will last a lifetime. Matched cove and bead style bits come fully assembled, so you can get to work making beautiful rail and stile joints. Mill a tenon of any length simply by unscrewing the top cutter and bearing…

    1 Review(s)
    $199.97
  11. Back Cutter Router Bit

    Back Cutter Router Bit

    This relief cutter provides a safe, economical way to fit flat and raised panels into the 1/4" groove of cope and stick frames. For flat panels, making a relief cut means you don't have to plane your panels down to 1/4", meaning less wasted wood, less wear and tear, and a far more stable panel. The…

    0 Review(s)
    $44.99
  12. Routers and Router Tables (Book)

    Routers and Router Tables (Book)

    …moldings.* Make perfect raised-panel doors.* Create elegant furniture parts* Repeat shapes consistently, quickly and precisely.Table of Contents: Introduction Part One - Routers and Bits * How Many Routers Does Your Shop Need? * Trim Routers * Heavy-Duty Plunge Routers* Ten Essential Router Bits *…

    $21.95
  13. Reversible Sash & Door Assembly Router Bit

    Reversible Sash & Door Assembly Router Bit

    This router bit allows you to make custom wooden window and door frames in your own home shop. The set comes with a spacer, bearing and two cutters mounted on an arbor, and is designed to be reversed so that both cope and stick cuts can be made with a single bit. The cope and stick joint fits…

    3 Review(s)
    $69.99
  14. Powermatic® Shaper 5HP 1PH w/Digital Readout & Casters

    Powermatic® Shaper 5HP 1PH w/Digital Readout & Casters

    …This allows making adjustments to within .001" in the spindle height, which is critical when aligning rail and stile cutters for those raised panel doors.* Integrated caster system built into the cast iron base for instant shop mobility* Spindle height digital readout for making fine incremental…

    $3879.99
  15. Custom Door Edge Router Bit

    Custom Door Edge Router Bit

    Our Custom Door Edge Router Bit matches the most popular profile used in the kitchen cabinetry industry today. It is both decorative and functional, featuring a cove on the face side of the door and a bevel toward the rear, which makes it easy to open the door without a pull.

    $59.99
  16. Tambour Router Bit Set

    Tambour Router Bit Set

    This tambour router bit set allows you to custom-make wooden tambour doors of almost any size. The finished tambour will look great from both sides and have an interlocking design to keep slats in line and inhibit warping. Works for double or single curve applications. Requires 1/16" coated cable…

    1 Review(s)
    $99.99
  17. 2-Piece Ogee Stile and Rail Router Bit Set

    2-Piece Ogee Stile and Rail Router Bit Set

    Use these stile and rail router bits to make durable, beautifully crafted cabinet door frames. The cutters are adjustable and can be reconfigured to cut grooves of varying location and width for glass and other door panels. The bits are manufactured to exacting standards to create perfectly matched…

    $114.99
  18. Rockler Bead & Cove Bits for Canoe Building

    Rockler Bead & Cove Bits for Canoe Building

    doors! Exclusive sizes sold only at Rocker! Canoe makers use the smaller versions of these bits to make the long, seamless joints in the curving hulls of their canoes. We also sell larger versions for stock up to 1/2" thick (1/4" radius), which is ideal for building coopered barrels and curving door

    4 Review(s)
    From: $49.99
  19. Freud # 91-108 9-Piece Basic Router Bit Set, 1/2'' Shank

    Freud # 91-108 9-Piece Basic Router Bit Set, 1/2'' Shank

    Make your joinery and edge profiles look equally sharp with this 9-Piece Basic Router Bit Set from Freud. With a dovetail bit, three straight bits and a rabbeting bit, you'll have the capability of cutting a full suite of high-quality joints. Use the flush trim bit to trim any veneers, laminates or…

    $176.47
  20. Edge Beading Router Bits-1/2" Shank

    Edge Beading Router Bits-1/2" Shank

    …a router table at all. The bit also features a taller section at the top of the carbide, which allows you more freedom to adjust the size of the upper step. Of course, you can also adjust it flush if no step is desired. A classic profile for cabinet work and architectural features, it makes an…

    4 Review(s)
    $34.99 From: $23.99

    SAVE 31%

  21. Edge Beading Router Bit-1/4" Shank

    Edge Beading Router Bit-1/4" Shank

    …a router table at all. The bit also features a taller section at the top of the carbide, which allows you more freedom to adjust the size of the upper step. Of course, you can also adjust it flush if no step is desired. A classic profile for cabinet work and architectural features, it makes an…

    4 Review(s)
    From: $34.99
  22. Rockler Restoration Beading Router Bits, 1/2" Shank

    Rockler Restoration Beading Router Bits, 1/2" Shank

    Our beading bits come in a range of sizes to suit many applications. Use the smaller bits to make beaded trim moldings, and the larger bits for bull-nosed edges on thicker stock. A 1/4" beaded molding mitered around doors and drawer fronts adds a subtle and strikingly attractive effect. In…

    2 Review(s)
    From: $26.99
  23. Freud Rail & Stile Profile Bit

    Freud Rail & Stile Profile Bit

    …use the Freud 99-062 bit or an equivalent slot cutter set up in your router table to mill the remaining elements of the profiles. Of course, the bit can also be used as an edge profiling bit, and makes a perfect match for the outside edge of your stile and rail doors.* Cuts all composition…

    $53.97
  24. Bill Hylton's Ultimate Guide to the Router Table, Book

    Bill Hylton's Ultimate Guide to the Router Table, Book

    …the most out of your router table. Hylton shares his secrets on how to build and set up your router table and jigs for perfect joinery, profile cuts, making raised panel doors and more. 128 pages. This end-all, be-all book on routing tables and the versatile router offers a wealth of insights…

    1 Review(s)
    $24.99
  • Items 1 - 24 of 31
  • Page:
    1. 1
    2. 2
Feedback X