Dovetail Guide

  • Items 1 - 24 of 41
  • Page:
    1. 1
    2. 2
  1. Guide Bushings-Guide Bushings

    Guide Bushings-Guide Bushings

    …and utility of a router template guide bushing. With no moving parts to break, router bushings pump out part after identical part, and are never worse for wear. These guide bushings are available in a wide range of diameters (see below) for different bits, dovetail jigs and other template routing…

    2 Review(s)
    From: $7.79
  2. Nova Dovetail Chisel

    Nova Dovetail Chisel

    …it very easy to form professional dovetails, even for beginning turners.* Made from H2 High Speed Steel, hardened for durability in demanding turning conditions.* Handy mark out scale can be used as a guide to mark out the diameter you want to cut your dovetail to.* Pre-sharpened. Turner only has…

    $39.99
  3. Rockler Complete Dovetail Jig

    Rockler Complete Dovetail Jig

    …template for setting dovetail bit height for half-blind joints. Complete Dovetail Jig Includes: * Two durable phenolic templates* Three 8mm shank carbide-tipped router bits (1/2" x 14° dovetail, 1/2" x 8° dovetail, 5/16" straight)* 1/2" to 8mm collet adapter* 7/16" guide bushing fits most…

    131 Review(s)
    $164.99 $139.99

    SAVE 15%

  4. Making Heirloom Boxes

    Making Heirloom Boxes

    Guided by an experienced woodworker and hundreds of photos, enjoy a full course that covers everything: sourcing and seasoning different woods; choosing and using tools and equipment, and mastering basic techniques (mapping out the design, making dovetails, assembling the internal pieces), and more.…

    $17.95
  5. Sliding Susan® Pullout Drawer

    Sliding Susan® Pullout Drawer

    …Features English dovetail-joint construction and 3/4 extension drawer guides. Includes one (1) drawer. Easy to install: 1) set base 1/4" from front cabinet edge; 2) tighten four pre-drilled screws into cabinet base or shelf; 3) insert the Sliding Susan in the cabinet guides and you are done!

    25 Review(s)
    $64.99
  6. Universal Fence Clamps with Clamp-It® Square, Special Offer!

    Universal Fence Clamps with Clamp-It® Square, Special Offer!

    …can assemble any two pieces at 90 degrees, or even a cabinet one corner at a time. * Works with any joinery technique, from nails to hand cut dovetails.* Ideal for every stage of construction, from assembling plywood cabinets to face frames and drawers. * Clamp-It® is also perfect for framing…

    14 Review(s)
    $29.99
  7. 14° Dovetail Pattern Router Bit

    14° Dovetail Pattern Router Bit

    This Dovetail Pattern Bit includes a guide bearing that offers silky smooth operation when used with templates and dovetail jigs. All of our dovetail bits are specially designed with high radial and axial relief angles to give you extra clean, sharp edges. Perfect for drawers and jewelry boxes,…

    3 Review(s)
    $19.99
  8. 4210 Porter-Cable 12'' Dovetail Jig

    4210 Porter-Cable 12'' Dovetail Jig

    …Template includes a dovetail bit, a lock nut, a wrench for installation, and an instruction manual.Through Dovetail and Box Joint Template:* For through dovetails and box joints (box joints require a 1/4" straight bit, sold separately)* Template includes a template guide, a dovetail bit, a lock nut,…

    2 Review(s)
    $136.49
  9. Leigh Joint Guides for the FMT

    Leigh Joint Guides for the FMT

    …selection of joint guides and your FMT Mortise and Tenon Jig.* The 1/4" FMT guide set (31536) includes 8 guides and 1 stand (Leigh item #6704). It can machine mortises and tenons 1/4" thick, ranging from 1/4" to 2-3/8" wide.* The 3/8" FMT guide set (33859) includes 4 guides and 1 stand (Leigh item…

    From: $39.49
  10. Half Blind and Through Dovetail "Tails" Template

    Half Blind and Through Dovetail "Tails" Template

    Half Blind and Through Dovetail "Tails" Replacement Template for the Rockler Dovetail Jig.

    $29.99
  11. Kreg Precision Band Saw Fence

    Kreg Precision Band Saw Fence

    …unprecedented level of rigidity, adjustability and precision. Features:* Aircraft grade aluminum* Heavy-duty, solid extruded aluminum fence and dovetail bracket design provide plenty of support for rugged operations* Two simple adjustments for blade drift* Precision lens cursor is magnified and easy…

    2 Review(s)
    $107.00
  12. Rockler's Complete Dovetail Jig with Dovetail Jig Dust Collector Combo

    Rockler's Complete Dovetail Jig with Dovetail Jig Dust Collector Combo

    …joints. Complete Dovetail Jig Combo Includes: * Two durable phenolic templates* Dovetail Jig Dust Collector with 2-1/4'' Port* Three 8mm shank carbide-tipped router bits (1/2" x 14° dovetail, 1/2" x 8° dovetail, 5/16" straight)* 1/2" to 8mm collet adapter* 7/16" guide bushing fits most…

    131 Review(s)
    $205.98
  13. Router Bushing Set

    Router Bushing Set

    …work, cutting dovetails, cutting custom signs, or following your favorite templates. Includes 1/2" and 1/4" Dovetails, a Stanley F 3, Butt Hinge, Lock Face, two general bushings, and two locking nuts. All fit in a convenient plastic case. Technical Details: * 1/2" Dovetail Gd bushing: 11/32"…

    2 Review(s)
    $43.99
  14. Miniature Dovetail Template & Bit Kit

    Miniature Dovetail Template & Bit Kit

    guide. Attaches quickly and easily to the Rockler Dovetail Jig (22818). No other template allows for dovetail spacing this tight. It works with panels up to 5-1/2" wide - perfect for a great range of small-box projects. Includes:* 3/8" thick template* Template guide* 1/4" carbide-tipped dovetail bit…

    5 Review(s)
    $66.99
  15. Powermatic® Pneumatic Dovetail Machine

    Powermatic® Pneumatic Dovetail Machine

    …professional dovetails that will enhance your products. The DT65 is complete with 1HP 230V 1 phase motor, pneumatic clamping, magnetic starter, carbide tipped cutter, and a four-sided template that produces dovetails on 1", 1-1/2", 2", and 2-1/2" centerlines. The use of different dovetail

    $6425.99
  16. 1/2" Tenon-Lok™  Dovetail Drill Bit

    1/2" Tenon-Lok™ Dovetail Drill Bit

    …enough to extend the cutter's spring-loaded dovetailing blades. Let the drill come to a complete stop before removing the cutter from the mortise. 5. On a flat surface, place the setter guide over the ring with the sharp edges up. Fit tenon into guide and tap with mallet just enough to start the…

    2 Review(s)
    $25.49
  17. Woodworker's Guide to Joinery, Book

    Woodworker's Guide to Joinery, Book

    …gives clear, detailed instructions on joinery fundamentals: miter, lap and groove, mortise and tenon, dovetail joints and more. Hundreds of full - color photographs and illustrations guide you through. Whether using hand tools or power tools, you'll get plain-spoken advice on how to make your…

    $19.95
  18. Router Guide Bushing Kit

    Router Guide Bushing Kit

    Our 11-piece template guide kit will work with any template, pattern or jig for perfect duplicate routing. Ideal for stair, pattern and hinge routing, dovetailing and craft/hobby work. Fits any base with a 1-3/16" diameter center hole. Also available from Rockler, the Guide Bushing Router Plate…

    45 Review(s)
    $41.99
  19. Build a Hybrid Roubo Workbench, DVD

    Build a Hybrid Roubo Workbench, DVD

    …this Build a Hybrid Roubo Workbench DVD will guide you step-by-step through the process of constructing this iconic and historic woodworker's bench. You'll learn to make stopped tenons, edged through tenons, a full line of bench accessories, and a dovetailed tenon with a hardwood wedge than enables…

    $20.99
  20. Powermatic® Manual Dovetail Machine

    Powermatic® Manual Dovetail Machine

    The POWERMATIC® DT45 manual dovetail machine is used to cut dovetails for drawers and various furniture components. The machine is equipped with a router spindle which allows cutting dovetails of adjustable height. The DT45 can machine four types of dovetails with different pitches. Locking and…

    $3934.99
  21. Leigh M2 Multiple Mortise and Tenon Attachment

    Leigh M2 Multiple Mortise and Tenon Attachment

    …and Tenon Attachment brings multiple mortise and tenon joints within easy reach of any woodworker who owns a D4 Dovetail Jig and a plunge router with 1/2" collet. The adjustable guide fingers let you cut multiple joints in virtually any layout, in stock up to 24" wide. Mortises and tenons can be…

    $268.99
  22. Leigh 7-Piece Router Bit Set

    Leigh 7-Piece Router Bit Set

    …diamond wheels for superbly smooth, efficient cutting. 8mm bit shanks are 1-3/4" long to extend through the thickness of the guide fingers. Set includes 4 Through Dovetail bits (1/4", 5/16", 3/8', and 7/16"), and 3 Half-blind bits (10°, 12°, and 18°). Buy the set and save over individual…

    1 Review(s)
    $147.99
  23. Domino Self-Centering Guide

    Domino Self-Centering Guide

    …up to 5-1/4" apart (2-5/8" from center)* Stops are movable using a sliding dovetail arrangement* When clamped in position, stops are rigidly drawn tight to the guide and firmly locked* Dovetail saddles (clamps), dovetail bases, and Stop Arms are precision CNC machined from aviation grade billet…

    $129.00
  24. The New Complete Guide to the Bandsaw Book

    The New Complete Guide to the Bandsaw Book

    …Mark Duginske. From its typical usage for fair curves, straight cuts, scrollwork, ripping and resawing, all the way to mortise and tenon and dovetail joinery, you'll be amazed at how much you can get from one simple machine. Also includes sections on saw choice, blade choice, sharpening, tune-up…

    1 Review(s)
    $19.95
  • Items 1 - 24 of 41
  • Page:
    1. 1
    2. 2
Feedback X