Dovetail Jig Accessories

  • Grid List
  • Page:
    1. 1
  • Items 1 - 24 of 24
  • Page:
    1. 1
  1. Guide Bushings-Guide Bushings

    Guide Bushings-Guide Bushings

    …identical part, and are never worse for wear. These guide bushings are available in a wide range of diameters (see below) for different bits, dovetail jigs and other template routing applications. They fit perfectly in any router base with a 1-1/4" diameter center hole. Locking nuts are sold…

    2 Review(s)
    From: $7.79
  2. Through Dovetail "Pins" Template

    Through Dovetail "Pins" Template

    Replacement Template for routing the pins of through dovetails with Rockler's Complete Dovetail Jig (22818, sold separately).

    $29.99
  3. Half Blind and Through Dovetail "Tails" Template

    Half Blind and Through Dovetail "Tails" Template

    Half Blind and Through Dovetail "Tails" Replacement Template for the Rockler Dovetail Jig.

    $29.99
  4. Rockler 14° Dovetail Pattern Router Bit - 1/2" Dia x 1/2" H x 1/4" Shank

    Rockler 14° Dovetail Pattern Router Bit - 1/2" Dia x 1/2" H x 1/4" Shank

    This Dovetail Pattern Bit includes a guide bearing that offers silky smooth operation when used with templates and dovetail jigs. All of our dovetail bits are specially designed with high radial and axial relief angles to give you extra clean, sharp edges. Perfect for drawers and jewelry boxes,…

    3 Review(s)
    $19.99
  5. Rockler 7° Dovetail Router Bit for Porter-Cable 4210 and 4212 Dovetail Jigs - 17/32" Dia x 3/4" H x 1/2" Shank

    Rockler 7° Dovetail Router Bit for Porter-Cable 4210 and 4212 Dovetail Jigs - 17/32" Dia x 3/4" H x 1/2" Shank

    Cut cleaner, more precisely fitting dovetails with this 17/32" dovetail bit from Rockler. It's an ideal replacement dovetail bit for the Porter-Cable 4210 and 4212 dovetail jigs. With two finely ground carbide cutters, it stays sharper, longer, and its 1/2" shank increases rigidity for a more stable…

    3 Review(s)
    $19.99
  6. Leigh D4R Pro 24" Dovetail Jig w/Accessory Kit

    Leigh D4R Pro 24" Dovetail Jig w/Accessory Kit

    …"no-slop" through, half blind and sliding dovetails with a classic handcut look. AC D24 Leigh Jig Accessory Kit Includes the following:* Vacuum and router support (VRS) * 1/4", 5/16", 3/8", 7/16", 11/16", 13/16" x 8 degree dovetail bits * 7/16" x 1-1/4" CL…

    10 Review(s)
    $795.00
  7. Leigh AC D24 Leigh Jig Accessory Kit

    Leigh AC D24 Leigh Jig Accessory Kit

    * Accessory kit for Leigh D4R dovetail jig includes the vacuum and router support (VRS) * 1/4", 5/16", 3/8", 7/16", 11/16", 13/16" x 8 degree dovetail bits * 7/16" x 1-1/4" CL straight, 1/2 x 1-1/4" CL straight bits * 1/2" x 10 degree, 12 degree, and 18 degree dovetail bits * 1/2" and 8mm shank…

    $279.00
  8. Accessory Kits for Leigh Super Jigs

    Accessory Kits for Leigh Super Jigs

    …AC24 Accessory Kits make it easy to add dust collection, a stable sliding surface for your router, and a 7-piece boxed set of premium router bits to your dovetail jig. Each kit includes the appropriately sized VRS Vacuum and Router Support system, which attaches to the front of your dovetail jig

    3 Review(s)
    From: $189.00
  9. Leigh Accessory Kit for R9 Plus Joinery System

    Leigh Accessory Kit for R9 Plus Joinery System

    …using box joints, half-pitch through dovetails, or through dovetails with this Leigh Accessory Kit for the Leigh R9 Plus Joinery System! Technical Details:* Makes it easy to create perfect box joints, through dovetails, and half pitch through dovetails* HSS bit construction for clean cuts and…

    $99.00
  10. Leigh Super 12'' Dovetail Jig

    Leigh Super 12'' Dovetail Jig

    …and the dovetail finger assembly becomes a sliding dovetail template. Available in three widths: 12", 18" and 24" to satisfy the needs of every woodworker and every budget. Optional accessory kit also available. See the AC 12 Accessory Kit. The amazing joint making capability of Super Jigs is due in…

    3 Review(s)
    $269.00
  11. Leigh D4R Pro 24" Dovetail Jig

    Leigh D4R Pro 24" Dovetail Jig

    …"no-slop" through, half blind and sliding dovetails with a classic handcut look. AC D24 Leigh Jig Accessory Kit Includes the following:* Vacuum and router support (VRS) * 1/4", 5/16", 3/8", 7/16", 11/16", 13/16" x 8 degree dovetail bits * 7/16" x 1-1/4" CL…

    10 Review(s)
    $579.00
  12. Freud® Dovetail Router Bits - 1/4" Shank

    Freud® Dovetail Router Bits - 1/4" Shank

    Compatible with many popular dovetail jigs, these bits produce smooth, intricate dovetail joints. Use the 1/2"H dovetail bits for drawer stock, and the 13/16"H dovetail bits for 3/4" thick carcases. Cut all composition materials, plywoods, hardwoods and softwoods. Use on CNC and other automatic…

    From: $17.47
  13. Rockler 14° Dovetail Router Bit - 8mm Shank

    Rockler 14° Dovetail Router Bit - 8mm Shank

    The 8mm shank of this dovetail router bit is 25% larger than typical 1/4" bits for reduced chatter. It fits all existing Rockler dovetail jigs. Note: Requires a router with a 1/2" collet, as well as a 1/2"-to-8mm collet adapter.

    $19.99
  14. Rockler 8° Dovetail Router Bit - 8mm Shank

    Rockler 8° Dovetail Router Bit - 8mm Shank

    The 8mm shank of this dovetail router bit is 25% larger than typical 1/4" bits for reduced chatter. It fits all existing Rockler dovetail jigs. Note: Requires a router with a 1/2" collet, as well as a 1/2"-to-8mm collet adapter.

    $19.99
  15. Rockler Distinctive Series Dovetail Router Bits - 8mm Shank

    Rockler Distinctive Series Dovetail Router Bits - 8mm Shank

    …Series Dovetail Templates (sold separately). 8° dovetail angle offers a more traditional look and less chance of breakage at the corner of the tail. Thicker 8mm shanks minimize vibration and chatter. All three work perfectly with the 5/16" straight bit included with Rockler Dovetail Jig (22818).…

    2 Review(s)
    From: $17.99
  16. Rockler 4-Pc. Dovetail Router Bit Upgrade Set - 8mm Shank

    Rockler 4-Pc. Dovetail Router Bit Upgrade Set - 8mm Shank

    …in the shank helps to reduce chatter. Ideal for joining case goods, the set includes 1/2" x 14° and 8° dovetail bits, a 5/16" straight bit, and 1/2" to 8mm collet adapter. The straight bit can be used for box joints, or for cutting grooves and dados. Fits all existing Rockler dovetail jigs.

    1 Review(s)
    $54.99
  17. Rockler Porter-Cable Dovetail Jig Replacement Router Bit - 13/32" Dia x 1" H x 1/2" Shank

    Rockler Porter-Cable Dovetail Jig Replacement Router Bit - 13/32" Dia x 1" H x 1/2" Shank

    This is a replacement straight router bit for the 4212 Porter-Cable 12" Dovetail Jig (29550, sold separately). Use it for box joints. Two flutes for optimal chip removal, with an overall Length of 2-1/2". Diameter is 13/32" and carbide height is 1".

    1 Review(s)
    $17.99
  18. Porter-Cable D-Handle Base

    Porter-Cable D-Handle Base

    …about things tipping over due to the safe and secure router base; shifting both forward and backward is always smooth and stable. Technical Details:* D-Handle Base with trigger for single-handed contro* For use with 690 Series Router Motors* Preferred base configuration for use with dovetail jigs

    $117.99
  19. Rockler Router Guide Bushing Kit

    Rockler Router Guide Bushing Kit

    Our 11-piece template guide kit will work with any template, pattern or jig for perfect duplicate routing. Ideal for stair, pattern and hinge routing, dovetailing and craft/hobby work. Fits any base with a 1-3/16" diameter center hole. Also available from Rockler, the Guide Bushing Router Plate…

    45 Review(s)
    $41.99
  20. Domino Self-Centering Guide

    Domino Self-Centering Guide

    …up to 5-1/4" apart (2-5/8" from center)* Stops are movable using a sliding dovetail arrangement* When clamped in position, stops are rigidly drawn tight to the guide and firmly locked* Dovetail saddles (clamps), dovetail bases, and Stop Arms are precision CNC machined from aviation grade billet…

    $129.00
  21. Shop Improvements Book

    Shop Improvements Book

    …Magazine. 60 outstanding accessory and jig articles will fill your mind with ideas for things to add to your shop. Topics include workbenches, router jigs and fences, table saw extension tables, sawhorses and support stands, clamp and lumber racks, dovetailing jigs, storage solutions and more!

    $19.95
  22. Rockler Clamp-It® Assembly Square

    Rockler Clamp-It® Assembly Square

    …custom clamping jigs, acts as a third hand, and eliminates the need for long bulky clamps. Simply put, the Clamp-It® is a square you can clamp. In fact, you can even assemble a cabinet one corner at a time! Works with any joinery technique, from nails to hand cut dovetails. It's ideal for every…

    110 Review(s)
    $12.99
  23. Freud Box Joint Cutter Set

    Freud Box Joint Cutter Set

    …precise box joints quickly and cleanly the very first time-and every time. Includes instructions for making box joints and building a box joint jig. TIP: Make test cuts and sample joints with your new SBOX8 before using it on your first project. Whenever possible, plan projects to use stock with…

    1 Review(s)
    $94.97
  24. Mastering Your Bandsaw, Fine Woodworking DVD

    Mastering Your Bandsaw, Fine Woodworking DVD

    …cut your own veneer, make perfect dovetails, build a circle jig, cut perfect cones, and create bandsawn boxes.* Mark Duginske, author of the books Mastering Woodworking Machines and The Bandsaw Handbook, is a professional woodworker and has developed a variety of successful power tool accessories.

    2 Review(s)
    $20.99
  • Grid List
  • Page:
    1. 1
  • Items 1 - 24 of 24
  • Page:
    1. 1
Feedback X