Down Cut Router Bit

  • Items 1 - 24 of 36
  • Page:
    1. 1
    2. 2
  1. Onsrud Down-Cut Spiral Router Bits

    Onsrud Down-Cut Spiral Router Bits

    Down-spiral cutting action forces the chips down into the groove, eliminating the tendency for wood fibers to chip out the face. Double-flute design with HSS (high speed steel) construction for a smooth finish. * Recommended when chip flow should be directed down for a clean cut on top of the…

    From: $19.39
  2. Rockler Classical Miniature Roman Ogee Plunge Router Bit - 3/4" Dia x 7/16" H x 1/2" Shank

    Rockler Classical Miniature Roman Ogee Plunge Router Bit - 3/4" Dia x 7/16" H x 1/2" Shank

    Based on a miniature Roman ogee design, this profile can be used in successive cuts, then ripped down for astragals, in series for decorative fluting patterns, or in single cuts for a flat bottom trench with profiled sides. 3/4" diameter with a sturdy, vibration-free 1/2" shank.

    1 Review(s)
    $26.99
  3. Freud® Down-Spiral Router Bits - 1/4" Shank

    Freud® Down-Spiral Router Bits - 1/4" Shank

    …and laminates.* Freud's solid carbide down spiral bits are ideal for smooth, chip-free routing where chip removal is not a problem.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    From: $19.97
  4. Freud® Double Compression Spiral Router Bits - 1/2" Shank

    Freud® Double Compression Spiral Router Bits - 1/2" Shank

    …of up and down shear flutes eliminate chipping on both sides of double-sided veneers or laminated materials for a fine finish.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    1 Review(s)
    From: $81.97
  5. Freud® 99-061 Rail & Stile Profile Router Bit - 1-1/2" Dia x 3/8" H x 1/2" Shank

    Freud® 99-061 Rail & Stile Profile Router Bit - 1-1/2" Dia x 3/8" H x 1/2" Shank

    …facing down. Then use the Freud 99-062 bit or an equivalent slot cutter set up in your router table to mill the remaining elements of the profiles. Of course, the bit can also be used as an edge profiling bit, and makes a perfect match for the outside edge of your stile and rail doors.* Cuts all…

    $53.97
  6. Freud® Down-Spiral Router Bits - 1/2" Shank

    Freud® Down-Spiral Router Bits - 1/2" Shank

    …and laminates. * Freud's solid carbide down spiral bits are ideal for smooth, chip-free routing where chip removal is not a problem. * Cuts all composition materials, plywoods, hardwoods, and softwoods. * Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    3 Review(s)
    From: $50.97
  7. Freud® 90-160 5-Pc. Down-Spiral Solid Carbide Router Bit Set

    Freud® 90-160 5-Pc. Down-Spiral Solid Carbide Router Bit Set

    …bench to keep bits organized and protected. Solid carbide bits cut all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers. * Create mortises and dadoes with chip-free top surfaces.* Solid carbide construction.* The Down Spiral Bit Set is an…

    $159.97
  8. Rockler Rail Coping Jig

    Rockler Rail Coping Jig

    …handle for excellent control and comfortable grip.* Post handle hold-down clamp allows for quick repositioning.* When using the Coping Sled for the first time, your bit will be cutting a small rabbet in the phenolic base. This is normal and required to minimize tear-out for all future cuts.

    117 Review(s)
    $59.99 $44.99

    SAVE 25%

  9. CNC Shark Routing System, with New 7.0 Software

    CNC Shark Routing System, with New 7.0 Software

    …included (over $900 value).* Includes 3/8" Diameter V-Groove Router Bit* Includes two Hold-down Clamps* Includes mounts for a Bosch Router (Router Motor is not included, sold separately) * Fully compatible with the Bosch Colt Palm Router* Free downloadable control program included* Download free…

    21 Review(s)
    $2,899.99
  10. Freud® 3-Pc. Undersized Plywood Router Bit Set

    Freud® 3-Pc. Undersized Plywood Router Bit Set

    …protects bits from heat and pitch build up. Set comes in Freud's new case with bit mount to keep bits handy and safe. All bits have 1/4'' shanks. Cuts all composition materials, plywoods, hardwoods and softwoods. Use on hand-held and table mounted portable routers. * These Freud bits are designed…

    From: $51.47
  11. Freud® Mortising Router Bits - 1/2" Shank

    Freud® Mortising Router Bits - 1/2" Shank

    The down shear angle of the cutters on these Freud Mortising Bits works to eliminate splintering, making them particularly well suited for cutting hinge mortises, where a crisp outline is critical. They can also be used ideal for joinery applications like mortises, and dadoes.* Designed with deep…

    2 Review(s)
    From: $18.47
  12. Freud® Carbide Up-Spiral Router Bits - 1/2" Shank

    Freud® Carbide Up-Spiral Router Bits - 1/2" Shank

    …the ideal bit for pattern routing because when using a guide bushing the best face goes down and templates are attached to the top side. 1/2" shank. Application: Cutting mortises and routing deep blind holes * Freud's solid carbide up spiral bits combine effective chip removal with a cut that can't…

    1 Review(s)
    From: $51.47
  13. Freud® Up-Spiral Router Bits - 1/4" Shank

    Freud® Up-Spiral Router Bits - 1/4" Shank

    …also the ideal bit for pattern routing because the best face goes down while cutting, with templates attached to the top. 1/2" shank. Application: Cutting mortises and routing deep blind holes* Freud’s solid carbide up spiral bits combine effective chip removal with a cut that can’t…

    From: $20.47
  14. Rockler Triple Bead Router Bit - 7/8" Dia x 1" H x 1/2" Shank

    Rockler Triple Bead Router Bit - 7/8" Dia x 1" H x 1/2" Shank

    …three beads in a row, or just a single bead for a decorative edge, this multi-purpose beading bit will suit your needs. Just crank the bit up or down to reveal as much of the cutter as is required. Cuts 1-3 beads in a single pass, potentially tripling productivity. Ideally suited for moldings,…

    3 Review(s)
    $46.99
  15. Rockler Flush Trim V-Groove Router Bit - 1/2" Dia x 1" H x 1/2" Shank

    Rockler Flush Trim V-Groove Router Bit - 1/2" Dia x 1" H x 1/2" Shank

    …to emphasize a seam than to try to hide it. This bit does just that, applying a neat decorative V-groove along the line of the seam. Since you no longer have to sand the joint perfectly flush as you would with a typical flush trim bit, you also cut down on a lot of sanding. Just a pass or two with a…

    $22.99
  16. Rockler Back Cutter Router Bit - 2-1/8" Dia x 1/4" H x 1/4" Shank

    Rockler Back Cutter Router Bit - 2-1/8" Dia x 1/4" H x 1/4" Shank

    …economical way to fit flat and raised panels into the 1/4" groove of cope and stick frames. For flat panels, making a relief cut means you don't have to plane your panels down to 1/4", meaning less wasted wood, less wear and tear, and a far more stable panel. The same goes for raised panels. Instead…

    0 Review(s)
    $44.99
  17. Freud® 99-470 Reversible Wainscoting Router Bit - 1-1/2" Dia x 7/16" H x 1/2" Shank

    Freud® 99-470 Reversible Wainscoting Router Bit - 1-1/2" Dia x 7/16" H x 1/2" Shank

    …to 5/8" thick and mills matching frame joints with remarkable ease and precision. Bit height is set one time for male and female joints without requiring fence or height adjustments. Just rout stiles face down and rails face up for a perfect fit. If you want to install raised panels in the field…

    $44.97
  18. Rockler Keyhole Slot Router Bits - 1/4" Shank

    Rockler Keyhole Slot Router Bits - 1/4" Shank

    …* Use the slot cutter to cut a vertical slot for hanging pictures with a centered slot. * Rout two or more horizontal slots for larger hangings.* For added convenience, use with our Picture Hanging Keyhole Template. We recommend using the 3/8" Hanging Slot Router Bit (92024) and 5/8" Short Shank…

    7 Review(s)
    From: $14.99
  19. Freud® 99-569 Quadra-Cut™ Cove Raised Panel with Back Cutters Router Bit - 3-1/2" Dia x 1" H x 1/2" Shank

    Freud® 99-569 Quadra-Cut™ Cove Raised Panel with Back Cutters Router Bit - 3-1/2" Dia x 1" H x 1/2" Shank

    …professional, architecturally correct appearance. The cove profile raised panel bit also includes a back cutter to cut the relief so the panel fits into the groove. This means there's no need to plane panels down to 5/8", saving wear and tear on your machinery. Shims are included to allow adjustment…

    4 Review(s)
    $119.97
  20. Rockler Chamfer Reversible Rail & Stile Router Bit - 1-5/8" Dia x 15/16" H x 1/2" Shank

    Rockler Chamfer Reversible Rail & Stile Router Bit - 1-5/8" Dia x 15/16" H x 1/2" Shank

    …Routing:* To cut the groove and profile on the insides of the rails and stiles, run stock face down on table. Stack the bit (starting from the shank end) as follows: profile cutter, straight cutter, then bearing.* To cope the ends of the rails, run stock face up on table. Stack the bit (starting…

    1 Review(s)
    $69.99
  21. Rockler Classical Reversible Rail & Stile Router Bit - 1-5/8" Dia x 15/16" H x 1/2" Shank

    Rockler Classical Reversible Rail & Stile Router Bit - 1-5/8" Dia x 15/16" H x 1/2" Shank

    …Routing:* To cut the groove and profile on the insides of the rails and stiles, run stock face down on table. Stack the bit (starting from the shank end) as follows: profile cutter, straight cutter, then bearing.* To cope the ends of the rails, run stock face up on table. Stack the bit (starting…

    1 Review(s)
    $69.99
  22. Rockler Ogee Reversible Rail & Stile Router Bit - 1-5/8" Dia x 15/16" H x 1/2" Shank

    Rockler Ogee Reversible Rail & Stile Router Bit - 1-5/8" Dia x 15/16" H x 1/2" Shank

    …Routing:* To cut the groove and profile on the insides of the rails and stiles, run stock face down on table. Stack the bit (starting from the shank end) as follows: profile cutter, straight cutter, then bearing.* To cope the ends of the rails, run stock face up on table. Stack the bit (starting…

    2 Review(s)
    $69.99
  23. Pro Phenolic Router Table, Fence, Stand, & FX Router Lift

    Pro Phenolic Router Table, Fence, Stand, & FX Router Lift

    …area.* Ergonomic T-knobs for easy fence adjustment.* Includes bit safety guard for safe routing.* Includes Rockler Pro Fence with extruded aluminum backer for straight, accurate cuts.* Large opening in fence for big router bits.* Aluminum fence backer features front- and rear-mounted universal…

    1 Review(s)
    $649.99
  24. Rockler Pro Phenolic Router Table, Fence, & FX Router Lift

    Rockler Pro Phenolic Router Table, Fence, & FX Router Lift

    …area.* Ergonomic T-knobs for easy fence adjustment.* Includes bit safety guard for safe routing.* Includes Rockler Pro Fence with extruded aluminum backer for straight, accurate cuts.* Large opening in fence for big router bits.* Aluminum fence backer features front- and rear-mounted universal…

    $549.99
  • Items 1 - 24 of 36
  • Page:
    1. 1
    2. 2
Feedback X