Drawer Handles

  • Items 1 - 24 of 50
  • Page:
    1. 1
    2. 2
    3. 3
  1. Arts & Crafts Collection Stickley Dark Copper Pull

    Arts & Crafts Collection Stickley Dark Copper Pull

    …Rockler! These pulls duplicate the hand-hammered texture of the originals and are finished to a warm, glowing patina.* Choose from two sizes of drawer pulls in Dark Copper.* Cast copper.* Includes mounting hardware. Patterned from the original designs of Gustav and Leopold Stickley, this cast copper…

    11 Review(s)
    From: $18.19
  2. Card Holders with Pulls

    Card Holders with Pulls

    Label holder features an integrated drawer pull - ideal for curio chests, file drawers, card catalogs, hardware and jewelry storage, mail sorting, or any small chest of drawers where organization is a priority. Available in a range of finishes. Includes screws. Sold singly. Made in USA. Technical…

    $1.99
  3. Adjustable Pulls

    Adjustable Pulls

    Set these solid pulls at the spacing you need to get the look you want! Bases areadjustable to fit pre-existing holes. Simply unscrew the bases completely from theclamping rings, loosen the set screws from the rings and slide the rings to thedesired location. Then tighten the set screws and bases.…

    2 Review(s)
    $12.99
  4. Belwith Meadows 3'' Pull, P583-LP Lancaster Hand Polished Finish

    Belwith Meadows 3'' Pull, P583-LP Lancaster Hand Polished Finish

    * 4-5/8" Long x 7/8" Wide* 1" projection* 3" boring (hole spacing)* Lancaster Hand Polished Finish Technical Details* 4-5/8" Long x 7/8" Wide* 1" projection* 3" boring (hole spacing)* Lancaster Hand Polished Finish

    $3.49
  5. Bread Drawer Kits, Rev-a-Shelf BDC Series-16-3/4" Wide

    Bread Drawer Kits, Rev-a-Shelf BDC Series-16-3/4" Wide

    …sizes that can be trimmed to accommodate any drawer dimension. The Bread Drawer Cover Kit contains a one-piece cover with molded in handle and rear stop, adjustable sliding rails and mounting screws.* Convert your regular drawer into a bread drawer* Kit can be trimmed for a custom fit* Limited…

    From: $22.49
  6. Arts & Crafts Collection Stickley Dark Copper V Pull

    Arts & Crafts Collection Stickley Dark Copper V Pull

    …Rockler! These pulls duplicate the hand-hammered texture of the originals and are finished to a warm, glowing patina.* Choose from two sizes of V drawer pulls in Dark Copper.* Cast copper.* Includes mounting hardware. Patterned from the original designs of Gustav and Leopold Stickley, this cast…

    3 Review(s)
    $19.59
  7. Drawer Pull Router Bit

    Drawer Pull Router Bit

    Use this bit to apply a comfortable finger recess around the edges of doors and drawers, useful when you want a clean look without knobs or other hardware. You can also use it to rout finger pull stock that is applied separately, and you can even use it as a decorative edge treatment for table tops…

    $49.99
  8. Surface Mounted Drawer Pull

    Surface Mounted Drawer Pull

    Sleek looking surface mounted oak pull. Sanded smooth and ready for finishing. Approximately 4-1/2" wide x 1-3/4" high overall. Mounts from the rear with machine screws included with the pull. Projects approximately 7/8" , 3-3/4 C - C boring.

    4 Review(s)
    $9.59
  9. Deluxe Drawer Pull JIG IT®

    Deluxe Drawer Pull JIG IT®

    …installation quick, simple and accurate.* Offers spacing for 2-1/2", 3", 3-1/2", 3-3/4", 4" and 96mm.* Includes 24" aluminum T-slot bar, left to right self-adhesive tape measure, stop block for repetitive drawer pull alignment, and automatic center punch for perfect drill bit alignment every time.

    28 Review(s)
    $39.99
  10. G40 Clear Glass Drawer Pull

    G40 Clear Glass Drawer Pull

    Transform the look of your drawer without spending a fortune!* Finish: Clear* Overall length: 4-1/8"* Projection: 1-1/2"* Material: Glass* Mounting holes: 3"* Screws are included

    $6.19
  11. Drawer Pull JIG IT® Template and Center Punch

    Drawer Pull JIG IT® Template and Center Punch

    …-- and protect your investment in drawers and doors -- with the JIG IT® for Drawer Pulls and Knobs.* The marking template offers spacing for boring of 2-1/2 inches, 3 inches, 3-1/2 inches, 3-3/4 inches, 4 inches, and the European 96mm size.* The handle lets you adjust your setback from the…

    22 Review(s)
    $19.99
  12. Arts & Crafts Light Copper Stickley Drawer Pulls

    Arts & Crafts Light Copper Stickley Drawer Pulls

    Patterned from the original designs of Gustav and Leopold Stickley, this cast copper hardware has been re-issued by the Stickley Furniture Company exclusively for Rockler! These pulls duplicate the hand-hammered texture of the originals and are finished to a warm, glowing patina.* Cast copper.*…

    1 Review(s)
    $24.69
  13. Drawer Mounting Kits for Multi-Function Shop Stand-Drawer Mounting Kits

    Drawer Mounting Kits for Multi-Function Shop Stand-Drawer Mounting Kits

    …(width).* Drawer Slides: For 18" depth drawers, use 16" slides. For 24" depth drawers, use 22" slides. * Hafele Drawer Side and Slide Kits: For durable, smooth-rolling drawers in hardly any time at all, try Hafele's Metal Drawer Box System. These epoxy-coated metal drawer sides practically…

    $31.49
  14. Bread Drawer Kits, Rev-a-Shelf BDC Series-20-1/8" Wide

    Bread Drawer Kits, Rev-a-Shelf BDC Series-20-1/8" Wide

    …sizes that can be trimmed to accommodate any drawer dimension. The Bread Drawer Cover Kit contains a one-piece cover with molded in handle and rear stop, adjustable sliding rails and mounting screws.* Convert your regular drawer into a bread drawer* Kit can be trimmed for a custom fit* Limited…

    From: $23.49
  15. 200-lb. Over-Travel Slide For Wide Drawers (16" to 20")

    200-lb. Over-Travel Slide For Wide Drawers (16" to 20")

    Full extension side mounted drawer slides are solidly constructed to handle lateral files over 30" and large storage drawers. Sturdy 200 pound load rating. You have the option of under-mounting to totally conceal these slides when the drawer is open (load rating is 75 lbs. for this mounting option).…

    5 Review(s)
    From: $54.99
  16. Irwin Parallel Clamp, 48"

    Irwin Parallel Clamp, 48"

    With jaws that stay perfectly parallel, these clamps are ideal for accurate clamping of casework and drawers. The unique handle doubles as a clutch - just pull up to disengage. Clutch prevents clamp head from sliding down and pinching your fingers while on the clamp rack. The bar has no serrations,…

    27 Review(s)
    $47.99 $34.99

    SAVE 27%

  17. Irwin Parallel Clamp, 24"

    Irwin Parallel Clamp, 24"

    With jaws that stay perfectly parallel, these clamps are ideal for accurate clamping of casework and drawers. The unique handle doubles as a clutch - just pull up to disengage. Clutch prevents clamp head from sliding down and pinching your fingers while on the clamp rack. The bar has no serrations,…

    27 Review(s)
    $39.99 $29.99

    SAVE 25%

  18. Blum Slide Jig Gun

    Blum Slide Jig Gun

    …in place while screws are installed or pilot holes are made * Keeps cabinet profiles level * Ideal for face frame cabinets when positioning rear mount sockets * Can be used with the following Blum runners: METABOX 320 N, M, K, H and METABOX 330 M, K & H Using the handle scale with METABOX drawers

    7 Review(s)
    $21.99
  19. Amerock Allison Value Hardware Ring Pull, BP886-AE

    Amerock Allison Value Hardware Ring Pull, BP886-AE

    …furniture a vintage look and feel. The swing handle makes it easy to pull doors and drawers open and is also part of the overall decorative look of the piece. Technical Details* 1-3/4" overall length* 1" diameter backplate* 1-9/16" wide swing handle* 3/16" projection* Antique brass plated zinc*…

    $4.59
  20. Four Irwin Parallel Clamps w/Clamp Rack

    Four Irwin Parallel Clamps w/Clamp Rack

    Irwin Parallel Clamps: With jaws that stay perfectly parallel, these clamps are ideal for accurate clamping of casework and drawers. The unique handle doubles as a clutch - just pull up to disengage. Clutch prevents clamp head from sliding down and pinching your fingers while on the clamp rack.…

    $191.95
  21. Knob/Pull Machine Screws-8-32 Screws

    Knob/Pull Machine Screws-8-32 Screws

    Standard #8-32 machine screw, used for drawer front knobs and pulls. Different length screws used for installing pulls and knobs. Truss head design has a flatter profile than a regular round head screw. Zinc plated.

    3 Review(s)
    From: $2.59
  22. Heavy-Duty Hugger for Cords and Hoses

    Heavy-Duty Hugger for Cords and Hoses

    …into a tangled mess at the bottom of a drawer of in the back of your pickup, but not with the Heavy-Duty Hugger. This handy velcro strap firmly hugs any length of extension cord to prevent it from unwinding, and to keep the winds in order. The carrying handle is handy transport, and also allows you…

    1 Review(s)
    $5.99
  23. Solid Brass Knobs-Select size

    Solid Brass Knobs-Select size

    These brass knobs make excellent door and drawer pulls for small box projects. Polished finish provides an elegant look. Easy to install. Technical Details* Solid brass with steel screw* Screw length is 5/16"* Priced per pair

    17 Review(s)
    From: $4.19
  24. Small Wood Pull-Out Drawer, Wood - Maple (4WDB-12)

    Small Wood Pull-Out Drawer, Wood - Maple (4WDB-12)

    Undermount wood drawer boxes for your kitchen presented by Rev-a-Shelf. Add functionality to your base cabinets. The dovetail construction, maple veneer plywood and concealed bottom mount slides are sturdy enough to handle years of use. * Euro slide with 3/4 extension* Simple installation with only…

    $54.49
  • Items 1 - 24 of 50
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X