Drawer Plywood

  • Grid List
  • Page:
    1. 1
  • Items 1 - 21 of 21
  • Page:
    1. 1
  1. Drawer Sides-Select Size

    Drawer Sides-Select Size

    Our solid birch veneer plywood drawer sides are ready-made, for fast drawer assembly.* Size is 1/2" thick and have a 1/4" dado for the drawer bottom located 1/4" from the bottom edge.* Simply cut to length and assemble with your drawer front.* Available in 4 foot lengths.* Sizes listed are width.…

    12 Review(s)
    From: $6.99
  2. Hafele SmartCab™ Base Cabinet Pull-Out With Soft-Close Slides

    Hafele SmartCab™ Base Cabinet Pull-Out With Soft-Close Slides

    …Details:* The SmartCab™ is designed to fit a 15" wide or 18" wide (when used with optional Side Caddy) base cabinet opening with a drawer above it. Because the slide unit mounts to the bottom of the cabinet, however, the SmartCab will fit into virtually any cabinet, making it ideal…

    $219.99
  3. 24'' x 48'' Walnut Plywood

    24'' x 48'' Walnut Plywood

    These walnut plywood panels offer excellent strength, dimensional stability, and screw holding ability. Ideal for projects where shrinking, warping, swelling, or splitting are a concern. All are high quality A2 grade precut plywood panels with both faces in walnut. All panels measure 24"W x 48"L,…

    0 Review(s)
    From: $29.99
  4. Rockler Clamp-It® Assembly Square

    Rockler Clamp-It® Assembly Square

    …Works with any joinery technique, from nails to hand cut dovetails. It's ideal for every stage of construction, from assembling plywood cabinets to face frames and drawers. Clamp-It® is also perfect for framing decks and installing rails and balusters. Attach it to a work surface, and it becomes…

    110 Review(s)
    $12.99
  5. Custom Drawers - Now with Dovetail Joints!

    Custom Drawers - Now with Dovetail Joints!

    …Our dovetail drawers are available in four species of solid wood (Red Oak, White Oak, White Maple and Beech), as well as Baltic Birch plywood. Drawers include the front, back, sides and bottom of a basic drawer box. You supply the decorative drawer front to match your cabinetry. Drawers are shipped…

    6 Review(s)
  6. Baltic Birch Plywood-24 Inch X 48 Inch

    Baltic Birch Plywood-24 Inch X 48 Inch

    drawer sides and craft projects.* Also known as Russian Birch Plywood.* Front, back and inner plies are all quality one-piece plies.* Highly decorative, exceptional strength and great screw holding power.* May include matched face plugs.* Nominal sizes. About Grade BB Baltic Birch Plywood:*

    From: $12.99
  7. Large Wood Pull-Out Drawer, Wood - Maple (4WDB-15)

    Large Wood Pull-Out Drawer, Wood - Maple (4WDB-15)

    Undermount wood drawer boxes for your kitchen presented by Rev-a-Shelf. Add functionality to your base cabinets. The dovetail construction, maple veneer plywood and concealed bottom mount slides are sturdy enough to handle years of use. * Euro slide with 3/4 extension* Simple installation with only…

    $62.99
  8. Small Wood Pull-Out Drawer, Wood - Maple (4WDB-12)

    Small Wood Pull-Out Drawer, Wood - Maple (4WDB-12)

    Undermount wood drawer boxes for your kitchen presented by Rev-a-Shelf. Add functionality to your base cabinets. The dovetail construction, maple veneer plywood and concealed bottom mount slides are sturdy enough to handle years of use. * Euro slide with 3/4 extension* Simple installation with only…

    $54.49
  9. 24'' x 48'' Cherry Plywood

    24'' x 48'' Cherry Plywood

    These cherry plywood panels offer excellent strength, dimensional stability, and screw holding ability. Ideal for projects where shrinking, warping, swelling, or splitting are a concern. All are high quality A2 grade precut plywood panels with both faces in cherry. All panels measure 24"W x 48"L,…

    From: $24.99
  10. 24'' x 48'' Maple Plywood

    24'' x 48'' Maple Plywood

    These maple plywood panels offer excellent strength, dimensional stability, and screw holding ability. Ideal for projects where shrinking, warping, swelling, or splitting are a concern. All are high quality A2 grade precut plywood panels with both faces in maple. All panels measure 24"W x 48"L, and…

    From: $19.99
  11. 24'' x 48'' Red Oak Plywood

    24'' x 48'' Red Oak Plywood

    These red oak plywood panels offer excellent strength, dimensional stability, and screw holding ability. Ideal for projects where shrinking, warping, swelling, or splitting are a concern. All are high quality A2 grade precut plywood panels with both faces in red oak. All panels measure 24"W x 48"L,…

    From: $19.99
  12. Freud® 99-240 Drawer Lock Router Bit - 2" Dia x 33/64" H x 1/2" Shank

    Freud® 99-240 Drawer Lock Router Bit - 2" Dia x 33/64" H x 1/2" Shank

    Drawer fronts are formed horizontally, flat on the table surface. Drawer sides are formed vertically against the fence of the table. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on table-mounted portable routers.

    $40.47
  13. Natural Cork

    Natural Cork

    …hundreds of other things! Apply this genuine 5/32" thick cork over 1/2" lauan or other soft grade plywood substrate to make your own bulletin board. Natural cork is also great for coaster linings, drawer liners, scratch guards and more! 24" x 48" roll. * Natural tan color.* Can be cut with scissors…

    2 Review(s)
    $15.99
  14. Freud® Single Flute Straight Router Bits - 1/4" Shank

    Freud® Single Flute Straight Router Bits - 1/4" Shank

    …general stock removal at fast feed rates. They're ideal for cutting narrow grooves and channels, such as those for drawer bottoms. The bits cut all composition materials, plywoods, hardwoods and softwoods. Use them on CNC and other automatic routers as well as hand-held and table-mounted portable…

    From: $11.47
  15. Rockler Universal Fence Clamps with Clamp-It® Square, Special Offer!

    Rockler Universal Fence Clamps with Clamp-It® Square, Special Offer!

    …technique, from nails to hand cut dovetails.* Ideal for every stage of construction, from assembling plywood cabinets to face frames and drawers. * Clamp-It® is also perfect for framing decks, drawer assembly, and installing rails and balusters.* Fence Clamps may also be used to secure a huge…

    14 Review(s)
    $29.99
  16. Freud® 99-065 Finger Pull Door Lip Router Bit - 2" Dia x 1-1/4" H x 1/2" Shank

    Freud® 99-065 Finger Pull Door Lip Router Bit - 2" Dia x 1-1/4" H x 1/2" Shank

    …into when opening cabinet doors and drawers. This eliminates the need for costly pulls, provides a clean, modern look, and lets you open the door or drawer from virtually any angle or position, without overreaching.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on…

    $70.97
  17. Kreg™ 675-Pc. Self-Tapping Pocket Hole Screw Kit

    Kreg™ 675-Pc. Self-Tapping Pocket Hole Screw Kit

    …material. Works great screwing cabinet partition to floor, nail rails to partition, corner blocks, and plywood to plywood. For use in 3/4" stock.* Use #7 x 1" pan-head coarse thread screw when joining material to soft or composite material. Ideal for drawer boxes. For use in 1/2" thick stock.

    9 Review(s)
    $29.99
  18. Freud® 99-063 No Lip Door Edge Router Bit - 1-3/4" Dia x 5/8" H x 1/2" Shank

    Freud® 99-063 No Lip Door Edge Router Bit - 1-3/4" Dia x 5/8" H x 1/2" Shank

    …inverted ogee profile on the face of door and drawer fronts. Also designed to compliment the profile created by the 99-064 Finger Pull door edge bit. Precise shear angles provide a splinter-free finish. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and…

    $57.47
  19. Freud® Round Nose Router Bits - 1/2" Shank

    Freud® Round Nose Router Bits - 1/2" Shank

    …finger pulls and drain rails for cutting boards.* Add a personal touch to cabinet doors, drawer fronts, and fluted millwork, or use these bits to engrave wooden signs.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on CNC and other automatic routers as well as hand-held…

    2 Review(s)
    $34.97 From: $24.79

    SAVE 29%

  20. Freud® Round Nose Router Bits - 1/4" Shank

    Freud® Round Nose Router Bits - 1/4" Shank

    …and drain rails for cutting boards. These Round Nose Router Bits cut all composition materials, plywoods, hardwoods, and softwoods allowing you to add a personal touch to cabinet doors, drawer fronts, and fluted millwork, or use these bits to engrave wooden signs. Use on CNC and other automatic…

    From: $19.97
  21. Freud® Dovetail Router Bits - 1/4" Shank

    Freud® Dovetail Router Bits - 1/4" Shank

    …jigs, these bits produce smooth, intricate dovetail joints. Use the 1/2"H dovetail bits for drawer stock, and the 13/16"H dovetail bits for 3/4" thick carcases. Cut all composition materials, plywoods, hardwoods and softwoods. Use on CNC and other automatic routers as well as handheld and…

    From: $17.47
  • Grid List
  • Page:
    1. 1
  • Items 1 - 21 of 21
  • Page:
    1. 1
Feedback X