Drawer Bit

  • Items 1 - 24 of 54
  • Page:
    1. 1
    2. 2
    3. 3
  1. Rockler Drawer Lock Router Bit

    Rockler Drawer Lock Router Bit

    Our Drawer Lock Bit routs a joint similar to a locking rabbet, but the rabbet is wedge-shaped so the parts fit tighter when clamped. A single bit routs both parts of the joint, and is capable of routing joints for drawers with applied drawer fronts, and for drawer boxes where the finished front is…

    18 Review(s)
    $37.99 $26.59

    SAVE 30%

  2. Freud Single Flute Straight Router Bits

    Freud Single Flute Straight Router Bits

    Designed with plenty of chip clearance, Freud's Single-Flute Straight Bits work well for general stock removal at fast feed rates. They're ideal for cutting narrow grooves and channels, such as those for drawer bottoms. The bits cut all composition materials, plywoods, hardwoods and softwoods. Use…

    From: $11.47
  3. 45° Lock Miter Router Bit -1/2'' Shank

    45° Lock Miter Router Bit -1/2'' Shank

    …than a straight miter. Machining parts with the Lock Miter Bit is easy—with the bit height set, one part is cut horizontally on the router table, while the corresponding part is cut vertically. The bit is ideal for joining drawer boxes, cabinet parts, and for building 4-sided columns. To make…

    20 Review(s)
    $57.99 $39.99

    SAVE 31%

  4. Drawer Front Adjustment Screws

    Drawer Front Adjustment Screws

    …wood drawer fronts.* With Lo Root thread design for substantial holding power and #2 Square-X heads.* Uses #2 Square-Drive or phillips bits.* Zinc finish.* 100 screws per pack. Washer head screw for drawer front adjustment has 1/2" outside diameter that covers 5/16" adjusting hole once drawer front…

    2 Review(s)
    From: $5.19
  5. Shaker Raised Panel 3-Piece Bit Set

    Shaker Raised Panel 3-Piece Bit Set

    …that fits into the groove. The Shaker style profile features a simple chamfer along the inside edges of the frame, as well as on the panel. 1/2" shank router bits with high-grade carbide cutters. Use with stock up to 3/4" thick. Also ideal for drawer fronts to complement your raised panel doors.

    $209.99
  6. Drawer Pull Router Bit

    Drawer Pull Router Bit

    Use this bit to apply a comfortable finger recess around the edges of doors and drawers, useful when you want a clean look without knobs or other hardware. You can also use it to rout finger pull stock that is applied separately, and you can even use it as a decorative edge treatment for table tops…

    $49.99
  7. Router Bit Set-Up Jigs-Rail-and-Style Bits

    Router Bit Set-Up Jigs-Rail-and-Style Bits

    Set your router bit to the precise height every time! Simply bring the router bit up through the table and align the jig with the cutting edge of the bit.. This system is ideal for making accurate rail-and-stile construction, lock miter joints and more. All jigs are manufactured for 3/4" stock. They…

    $7.69
  8. Deluxe Drawer Pull JIG IT®

    Deluxe Drawer Pull JIG IT®

    …installation quick, simple and accurate.* Offers spacing for 2-1/2", 3", 3-1/2", 3-3/4", 4" and 96mm.* Includes 24" aluminum T-slot bar, left to right self-adhesive tape measure, stop block for repetitive drawer pull alignment, and automatic center punch for perfect drill bit alignment every time.

    28 Review(s)
    $39.99
  9. Router Bit Set-Up Jigs for 22637 Drawer Lock Corner Bit

    Router Bit Set-Up Jigs for 22637 Drawer Lock Corner Bit

    Set your router bit to the precise height every time! Simply bring the router bit up through the table and align the jig with the cutting edge of the bit. All jigs are manufactured for 3/4" stock. They are made of durable HDPE and measure 2" x 3-7/8" x 3/4". (Jigs designed for rail-and-stile have…

    $7.69
  10. 1-1/16" Diameter X 3/4" High Drawer Lock Bit

    1-1/16" Diameter X 3/4" High Drawer Lock Bit

    …rabbet bit, but it cuts two tongues instead of one for added mechanical strength and additional gluing surface. The wedged profile of the tongues helps everything snug up under clamping pressure, while still exposing valuable long grain gluing surface. To machine your parts, run the drawer fronts…

    5 Review(s)
    $44.99
  11. Router Bit Set-Up Jigs for 92112 and 92123 Drawer Lock Bits

    Router Bit Set-Up Jigs for 92112 and 92123 Drawer Lock Bits

    Set your router bit to the precise height every time for accurate lock miter joints! Simply bring the router bit up through the table and align the jig with the cutting edge of the bit. Jig works for 3/4" stock on one side and 5/8" stock on the other. Made of durable HDPE and measures 2" x 3-7/8" x…

    1 Review(s)
    $7.69
  12. Freud # 99-240 Drawer Lock Bit, 2'' Dia. x 33/64'' H x 1/2'' Sh.

    Freud # 99-240 Drawer Lock Bit, 2'' Dia. x 33/64'' H x 1/2'' Sh.

    Drawer fronts are formed horizontally, flat on the table surface. Drawer sides are formed vertically against the fence of the table. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on table-mounted portable routers.

    $40.47
  13. Router Bit Tray

    Router Bit Tray

    Organize and store up to fifty router bits in this quality tray for drawers, shop made cases or use as a replacement tray for our Small Router Bit Case (sold separately, sku: 60588). * Twenty holes for 1/4" shank bits* Thirty holes for 1/2" shank bits* 6" x 12" x 1-1/2"* Made of hard foam

    3 Review(s)
    $10.99
  14. Ogee Door Bit OE804

    Ogee Door Bit OE804

    …600 grit diamond wheel on the final sharpening to produce the sharpest possible edge for a clean cut and long life. Plus, this bit matches the most popular profiles used in our exclusive custom cabinet door and cabinet drawer program, letting you create additional cabinetry or other matching pieces.

    $49.99
  15. Decorative Ogee Bit OE869

    Decorative Ogee Bit OE869

    …600 grit diamond wheel on the final sharpening to produce the sharpest possible edge for a clean cut and long life. Plus, this bit matches the most popular profiles used in our exclusive custom cabinet door and cabinet drawer program, letting you create additional cabinetry or other matching pieces.

    1 Review(s)
    $54.99
  16. Roman Ogee Bit OE822

    Roman Ogee Bit OE822

    …600 grit diamond wheel on the final sharpening to produce the sharpest possible edge for a clean cut and long life. Plus, this bit matches the most popular profiles used in our exclusive custom cabinet door and cabinet drawer program, letting you create additional cabinetry or other matching pieces.

    $42.99
  17. Drawer Pull JIG IT® Template and Center Punch

    Drawer Pull JIG IT® Template and Center Punch

    …spacing for pull borings.* Pulls off perfectly aligned drawer pulls and knobs time after time. Get the highest degree of accuracy in knob and pull placement -- and protect your investment in drawers and doors -- with the JIG IT® for Drawer Pulls and Knobs.* The marking template offers spacing…

    22 Review(s)
    $19.99
  18. 14° Dovetail Pattern Router Bit

    14° Dovetail Pattern Router Bit

    This Dovetail Pattern Bit includes a guide bearing that offers silky smooth operation when used with templates and dovetail jigs. All of our dovetail bits are specially designed with high radial and axial relief angles to give you extra clean, sharp edges. Perfect for drawers and jewelry boxes,…

    3 Review(s)
    $19.99
  19. Twin Step Ogee Bit OE833

    Twin Step Ogee Bit OE833

    …600 grit diamond wheel on the final sharpening to produce the sharpest possible edge for a clean cut and long life. Plus, this bit matches the most popular profiles used in our exclusive custom cabinet door and cabinet drawer program, letting you create additional cabinetry or other matching pieces.

    $44.99
  20. Cove Raised Panel Bit P602

    Cove Raised Panel Bit P602

    …the final sharpening to produce the sharpest possible edge for a clean cut and long life. Plus, this bit matches the most popular profiles used in our exclusive custom cabinet door and cabinet drawer program, letting you create additional cabinetry or other matching pieces. * Cuts both straight and…

    0 Review(s)
    $142.99
  21. 30 Degree Chamfer Bead Profile Bit

    30 Degree Chamfer Bead Profile Bit

    This Rockler exclusive bit is a perfect fit for drawer fronts to complement raised panel doors, especially straight or Shaker-style raised panel doors. The flat field with steps on either side is a classic design common on old molding planes, but hard to find in router bit form.

    2 Review(s)
    $49.99
  22. Freud Finger Pull Door Lip Bit

    Freud Finger Pull Door Lip Bit

    This router bit is both functional and decorative. It creates the same finger pull profile found on many contemporary cabinet doors, providing a comfortable recess for your fingers to fit into when opening cabinet doors and drawers. This eliminates the need for costly pulls, provides a clean, modern…

    $70.97
  23. Freud No Lip Door Edge Bit

    Freud No Lip Door Edge Bit

    Creates a decorative inverted ogee profile on the face of door and drawer fronts. Also designed to compliment the profile created by the 99-064 Finger Pull door edge bit. Precise shear angles provide a splinter-free finish. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on…

    $57.47
  24. Straight Panel Bit with Back Cutter P636

    Straight Panel Bit with Back Cutter P636

    …the final sharpening to produce the sharpest possible edge for a clean cut and long life. Plus, this bit matches the most popular profiles used in our exclusive custom cabinet door and cabinet drawer program, letting you create additional cabinetry or other matching pieces. * Cuts both straight and…

    $142.99
  • Items 1 - 24 of 54
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X