Drawer Boxes

  • Items 1 - 24 of 69
  • Page:
    1. 1
    2. 2
    3. 3
  1. Custom Drawers - Now with Dovetail Joints!

    Custom Drawers - Now with Dovetail Joints!

    …Our dovetail drawers are available in four species of solid wood (Red Oak, White Oak, White Maple and Beech), as well as Baltic Birch plywood. Drawers include the front, back, sides and bottom of a basic drawer box. You supply the decorative drawer front to match your cabinetry. Drawers are shipped…

    6 Review(s)
  2. Rockler Drawer Lock Router Bit - 1" Dia x 1/2" H x 1/2" Shank

    Rockler Drawer Lock Router Bit - 1" Dia x 1/2" H x 1/2" Shank

    Our Drawer Lock Bit routs a joint similar to a locking rabbet, but the rabbet is wedge-shaped so the parts fit tighter when clamped. A single bit routs both parts of the joint, and is capable of routing joints for drawers with applied drawer fronts, and for drawer boxes where the finished front is…

    18 Review(s)
    $37.99
  3. Large Wood Pull-Out Drawer, Wood - Maple (4WDB-15)

    Large Wood Pull-Out Drawer, Wood - Maple (4WDB-15)

    Undermount wood drawer boxes for your kitchen presented by Rev-a-Shelf. Add functionality to your base cabinets. The dovetail construction, maple veneer plywood and concealed bottom mount slides are sturdy enough to handle years of use. * Euro slide with 3/4 extension* Simple installation with only…

    $62.99
  4. Hafele Metal Drawer Box System-22" Drawer Slides

    Hafele Metal Drawer Box System-22" Drawer Slides

    drawers in hardly any time at all, try Hafele's Metal Drawer Box System. These epoxy-coated metal drawer sides practically eliminate the time it would take to construct a wooden drawer box, and thedrawer slides are integrated into them, saving the time it takes to fasten drawer members onto the box.

    0 Review(s)
    From: $14.99
  5. Kreg Drawer Mounting Brackets

    Kreg Drawer Mounting Brackets

    …cabinet, simply clamp a bracket under each slide, set the drawer box into the drawer opening so it balances on the brackets and pull the slide to the front of the drawer box. Drive screws and you're done!* Works with Kreg Universal Drawer Slide Mounting Jig (#38444).* Includes left and right…

    1 Review(s)
    $9.99
  6. Small Wood Pull-Out Drawer, Wood - Maple (4WDB-12)

    Small Wood Pull-Out Drawer, Wood - Maple (4WDB-12)

    Undermount wood drawer boxes for your kitchen presented by Rev-a-Shelf. Add functionality to your base cabinets. The dovetail construction, maple veneer plywood and concealed bottom mount slides are sturdy enough to handle years of use. * Euro slide with 3/4 extension* Simple installation with only…

    $54.49
  7. Making Heirloom Boxes

    Making Heirloom Boxes

    …(mapping out the design, making dovetails, assembling the internal pieces), and more. Projects include a strap-hinged box with a curved drawer; a chess box with board; and a skeleton box. 8 1/4 X 10 7/8. all in color. Peter Lloyd Guild of Master Craftsman 144 pages PB-Trade Paperback Pub Year : 2002…

    $17.95
  8. Walnut by the Piece-1/8" Thickness

    Walnut by the Piece-1/8" Thickness

    …are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations. Thicker boards are ideal for furniture, paneling, cabinet doors, moldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up! * Tree: May attain a height…

    11 Review(s)
    From: $4.99
  9. Salice Futura Push-to-Open Drawer Slides

    Salice Futura Push-to-Open Drawer Slides

    …Minimum drawer side thickness is 1/2" (13mm).* Maximum drawer side thickness is 5/8" (16mm).* Load rating is 75 lbs dynamic, 100 lbs static.* Drawer bottom must be recessed from bottom edge of drawer. Recess range is 3/8" to 9/16".* Length of drawer slide should equal the length of the drawer box.*

    2 Review(s)
    From: $29.99
  10. Accuride Eclipse 3132SC Undermount Slides

    Accuride Eclipse 3132SC Undermount Slides

    …with 1/2" to 5/8" drawer box thicknesses.* Up to 24" wide drawer compatibility.* Precision adjustment features slotted holes to allow for front-to-back adjustment of the slide during installation; 1/8" vertical and horizontal drawer front adjustment (1/4 turn cam lock secures drawer front position…

    9 Review(s)
    From: $38.99
  11. African Mahogany by the Piece-1/4" Thickness

    African Mahogany by the Piece-1/4" Thickness

    …are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations. Thicker boards are ideal for furniture, paneling, cabinet doors, moldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up! * Texture: Fine or medium…

    4 Review(s)
    From: $7.99
  12. Rockler 14° Dovetail Pattern Router Bit - 1/2" Dia x 1/2" H x 1/4" Shank

    Rockler 14° Dovetail Pattern Router Bit - 1/2" Dia x 1/2" H x 1/4" Shank

    …templates and dovetail jigs. All of our dovetail bits are specially designed with high radial and axial relief angles to give you extra clean, sharp edges. Perfect for drawers and jewelry boxes, sliding dovetail joints for table and leg extensions, or sliding drawer and shelf runners and dividers.

    3 Review(s)
    $19.99
  13. Kitchen Drawer Organizers, Rev-a-Shelf 4WKB Series

    Kitchen Drawer Organizers, Rev-a-Shelf 4WKB Series

    …Kitchen Drawer Organizing options include our Rolling Tray Systems, Cutlery/Utility Trays and Spice Trays. Each of these options give you up to twice the storage by cutting down on drawer clutter and mess, while utilizing all space to its maximum. Rev-A-Shelf's unique 4WKB Series is out of the box

    $50.49
  14. Cherry by the Piece-1/8" Thickness

    Cherry by the Piece-1/8" Thickness

    …are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations, while the thicker boards are ideal for furniture, paneling, cabinet doors, mouldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up! * Distribution: As…

    5 Review(s)
    From: $4.99
  15. Kreg Micro Pocket Drill Guide

    Kreg Micro Pocket Drill Guide

    …in narrow pieces.* Screw heads seat well below material surface in thin stock, perfect for creating fully pluggable pocket holes in 1/2" thick material like drawer boxes.* Includes the Micro Pocket® Drill Guide, Micro Pocket® Drill Bit, Micro Pocket® Depth Collar and Starter Screw Set.

    8 Review(s)
    $44.95
  16. Black Palm by the Piece

    Black Palm by the Piece

    …well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations, while the thicker boards are ideal for furniture, paneling, cabinet doors, mouldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up! Technical Details:*…

    2 Review(s)
    From: $17.49
  17. Dozuki Dovetail Saw

    Dozuki Dovetail Saw

    This Japanese handsaw is used for cutting dovetails for boxes, drawers, or furniture. Features metal backbone to help keep the blade stiff. Blade has 25 TPI, a 9-1/2" cutting edge and is 0.3mm thick.

    9 Review(s)
    $47.99
  18. Surface Mounted Drawer Pull

    Surface Mounted Drawer Pull

    Sleek looking surface mounted oak pull. Sanded smooth and ready for finishing. Approximately 4-1/2" wide x 1-3/4" high overall. Mounts from the rear with machine screws included with the pull. Projects approximately 7/8" , 3-3/4 C - C boring.

    4 Review(s)
    $4.99
  19. Purpleheart by the Piece-3/4" Thickness

    Purpleheart by the Piece-3/4" Thickness

    …well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations, while the thicker boards are ideal for furniture, paneling, cabinet doors, moldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up! * Alternate name:…

    17 Review(s)
    From: $10.49
  20. Cherry by the Piece-1/2" Thickness

    Cherry by the Piece-1/2" Thickness

    …are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations, while the thicker boards are ideal for furniture, paneling, cabinet doors, mouldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up! * Distribution: As…

    7 Review(s)
    From: $7.99
  21. Card Holders with Pulls

    Card Holders with Pulls

    Label holder features an integrated drawer pull - ideal for curio chests, file drawers, card catalogs, hardware and jewelry storage, mail sorting, or any small chest of drawers where organization is a priority. Available in a range of finishes. Includes screws. Sold singly. Made in USA. Technical…

    $1.99
  22. Complete Drawer System for Knives w/Cutting Board, Rev-a-Shelf 4KCB Series

    Complete Drawer System for Knives w/Cutting Board, Rev-a-Shelf 4KCB Series

    These organizers from Rev-a-Shelf come complete with slides and drawer boxes to replace your existing drawer. All you have to do is add your drawer front to these accessories to make your custom drawer organizer. This state-of-the-art combination knife holder/cutting board system glides on…

    From: $144.99
  23. Mini Ball Bearing Drawer Slides (7" to 15")

    Mini Ball Bearing Drawer Slides (7" to 15")

    These miniature slides are only 3/8" thick for small projects like jewelry boxes and CD storage cases. Requires a mortised installation in the drawer side. Optional snap for positive close is included.

    14 Review(s)
    From: $9.69
  24. Tool Box Liner

    Tool Box Liner

    Prevent tools from sliding around and becoming damaged in your tool box. This nonslip liner is solid grade and cushioned to keep tools in place even as you slide tool box drawers in and out, avoiding scratching and marring. Anti corrosive Rust Gard™ coating will inhibit rust and protect your…

    1 Review(s)
    $18.99
  • Items 1 - 24 of 69
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X