Drawer Front Router Bit

  • Grid List
  • Page:
    1. 1
  • Items 1 - 17 of 17
  • Page:
    1. 1
  1. Freud® 99-063 No Lip Door Edge Router Bit - 1-3/4" Dia x 5/8" H x 1/2" Shank

    Freud® 99-063 No Lip Door Edge Router Bit - 1-3/4" Dia x 5/8" H x 1/2" Shank

    …the face of door and drawer fronts. Also designed to compliment the profile created by the 99-064 Finger Pull door edge bit. Precise shear angles provide a splinter-free finish. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers.

    $57.47
  2. Rockler Drawer Lock Router Bit - 1" Dia x 1/2" H x 1/2" Shank

    Rockler Drawer Lock Router Bit - 1" Dia x 1/2" H x 1/2" Shank

    Our Drawer Lock Bit routs a joint similar to a locking rabbet, but the rabbet is wedge-shaped so the parts fit tighter when clamped. A single bit routs both parts of the joint, and is capable of routing joints for drawers with applied drawer fronts, and for drawer boxes where the finished front is…

    18 Review(s)
    $37.99
  3. Rockler 30° Chamfer Bead Profile Router Bit - 1-1/4" Dia x 9/16" H x 1/2" Shank

    Rockler 30° Chamfer Bead Profile Router Bit - 1-1/4" Dia x 9/16" H x 1/2" Shank

    This Rockler exclusive bit is a perfect fit for drawer fronts to complement raised panel doors, especially straight or Shaker-style raised panel doors. The flat field with steps on either side is a classic design common on old molding planes, but hard to find in router bit form.

    2 Review(s)
    $49.99
  4. Rockler Cove Router Bits - 1/4" Shank

    Rockler Cove Router Bits - 1/4" Shank

    Use for an elegant edge on drawer fronts, cabinet doors, furniture pieces and molding trim. Features an upward shear angle for more efficient and smoother cutting. Available in a range of radiuses to suit your application. 1/2" shanks provide the smoothest possible finished cut.* Two flutes.* 3/8"…

    2 Review(s)
    From: $24.99
  5. Rockler P636 Straight Panel with Back Cutter Router Bit - 3-1/2" Dia x 1/2" H x 1/2" Shank

    Rockler P636 Straight Panel with Back Cutter Router Bit - 3-1/2" Dia x 1/2" H x 1/2" Shank

    …top door panels! Cuts both the profile on the front of the panel and the rabbet in the back of the panel in one pass, giving you a perfect panel edge thickness every time and a 1/4" tongue for precise fitting rails and stiles. Rockler router bits are manufactured using the finest grade K20 tungsten…

    $142.99 $49.99

    SAVE 65%

  6. Freud® 99-240 Drawer Lock Router Bit - 2" Dia x 33/64" H x 1/2" Shank

    Freud® 99-240 Drawer Lock Router Bit - 2" Dia x 33/64" H x 1/2" Shank

    Drawer fronts are formed horizontally, flat on the table surface. Drawer sides are formed vertically against the fence of the table. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on table-mounted portable routers.

    $40.47
  7. Freud® Round Nose Router Bits - 1/4" Shank

    Freud® Round Nose Router Bits - 1/4" Shank

    …boards. These Round Nose Router Bits cut all composition materials, plywoods, hardwoods, and softwoods allowing you to add a personal touch to cabinet doors, drawer fronts, and fluted millwork, or use these bits to engrave wooden signs. Use on CNC and other automatic routers as well as hand-held and…

    From: $19.97
  8. Rockler P605 Ogee Raised Panel with Back Cutter Router Bit - 3-1/2" Dia x 1/2" H x 1/2" Shank

    Rockler P605 Ogee Raised Panel with Back Cutter Router Bit - 3-1/2" Dia x 1/2" H x 1/2" Shank

    …top door panels! Cuts both the profile on the front of the panel and the rabbet in the back of the panel in one pass, giving you a perfect panel edge thickness every time and a 1/4" tongue for precise fitting rails and stiles. Rockler router bits are manufactured using the finest grade K20 tungsten…

    $137.79
  9. Rockler 3-Pc. Shaker Raised Panel Router Bit Set - 1/2" Shank

    Rockler 3-Pc. Shaker Raised Panel Router Bit Set - 1/2" Shank

    …that fits into the groove. The Shaker style profile features a simple chamfer along the inside edges of the frame, as well as on the panel. 1/2" shank router bits with high-grade carbide cutters. Use with stock up to 3/4" thick. Also ideal for drawer fronts to complement your raised panel doors.

    $209.99
  10. Rockler Restoration Beading Router Bits - 1/2" Shank

    Rockler Restoration Beading Router Bits - 1/2" Shank

    Our beading bits come in a range of sizes to suit many applications. Use the smaller bits to make beaded trim moldings, and the larger bits for bull-nosed edges on thicker stock. A 1/4" beaded molding mitered around doors and drawer fronts adds a subtle and strikingly attractive effect. In…

    2 Review(s)
    From: $26.99
  11. Rockler Cove Router Bits - 1/2" Shank

    Rockler Cove Router Bits - 1/2" Shank

    Use for an elegant edge on drawer fronts, cabinet doors, furniture pieces and molding trim. Features an upward shear angle for more efficient and smoother cutting. Available in a range of radiuses to suit your application. 1/2" shanks provide the smoothest possible finished cut.* Two flutes.* 3/8"…

    2 Review(s)
    $26.99 From: $20.24

    SAVE 25%

  12. Powermatic® Manual Dovetail Machine

    Powermatic® Manual Dovetail Machine

    The POWERMATIC® DT45 manual dovetail machine is used to cut dovetails for drawers and various furniture components. The machine is equipped with a router spindle which allows cutting dovetails of adjustable height. The DT45 can machine four types of dovetails with different pitches. Locking and…

    $3,934.99
  13. Rockler Edge Beading Router Bits - 1/2" Shank

    Rockler Edge Beading Router Bits - 1/2" Shank

    …course, you can also adjust it flush if no step is desired. A classic profile for cabinet work and architectural features, it makes an ideal beaded molding for wrapping doors and drawer fronts. These bits feature 1/2" shanks, the ideal choice when more stability and the best cut quality are desired.

    4 Review(s)
    $34.99 From: $26.24

    SAVE 25%

  14. Rockler P602 Cove Raised Panel Router Bit - 3-1/2" Dia x 1/2" H x 1/2" Shank

    Rockler P602 Cove Raised Panel Router Bit - 3-1/2" Dia x 1/2" H x 1/2" Shank

    …arched top door panels! The bit cuts both the cove profile on the front of the panel and the recessed in the back of the panel in one pass, giving you a perfect panel edge thickness every time and a 1/4" tongue for precise fitting rails and stiles. Rockler router bits are manufactured using the…

    0 Review(s)
    $142.99
  15. Freud® Round Nose Router Bits - 1/2" Shank

    Freud® Round Nose Router Bits - 1/2" Shank

    Freud's Round Nose Router Bits can be used for fluted millwork, signs and decorative veining, as well as for practical features such as finger pulls and drain rails for cutting boards.* Add a personal touch to cabinet doors, drawer fronts, and fluted millwork, or use these bits to engrave wooden…

    2 Review(s)
    $34.97 From: $24.79

    SAVE 29%

  16. Rockler Edge Beading Router Bits - 1/4" Shank

    Rockler Edge Beading Router Bits - 1/4" Shank

    With its integral 1/2" guide bearing, this beading bit is a snap to use. There is no need to set the depth of cut with a fence, and you can even use the bit without a router table at all. The bit also features a taller section at the top of the carbide, which allows you more freedom to adjust the…

    4 Review(s)
    From: $34.99
  17. Rockler High Drawer Lock Router Bit - 1-1/16" Dia x 3/4" H x 1/2" Shank

    Rockler High Drawer Lock Router Bit - 1-1/16" Dia x 3/4" H x 1/2" Shank

    …rabbet bit, but it cuts two tongues instead of one for added mechanical strength and additional gluing surface. The wedged profile of the tongues helps everything snug up under clamping pressure, while still exposing valuable long grain gluing surface. To machine your parts, run the drawer fronts

    5 Review(s)
    $44.99
  • Grid List
  • Page:
    1. 1
  • Items 1 - 17 of 17
  • Page:
    1. 1
Feedback X