Drawer Knob Screws

  • Items 1 - 24 of 50
  • Page:
    1. 1
    2. 2
    3. 3
  1. Knob/Pull Machine Screws-8-32 Screws

    Knob/Pull Machine Screws-8-32 Screws

    Standard #8-32 machine screw, used for drawer front knobs and pulls. Different length screws used for installing pulls and knobs. Truss head design has a flatter profile than a regular round head screw. Zinc plated.

    3 Review(s)
    From: $2.59
  2. Rockler Drawer Pull JIG IT® Template and Center Punch

    Rockler Drawer Pull JIG IT® Template and Center Punch

    Marking screw holes becomes simple, quick and accurate!* Creates absolutely accurate spacing for pull borings.* Pulls off perfectly aligned drawer pulls and knobs time after time. Get the highest degree of accuracy in knob and pull placement -- and protect your investment in drawers and doors --…

    22 Review(s)
    $19.99
  3. 8-32 x 1-3/4" Truss Head Break Away Screw (20 per Pack)

    8-32 x 1-3/4" Truss Head Break Away Screw (20 per Pack)

    Ideal for mounting cabinet knobs and pulls when material thickness varies, these truss head screws can be broken to the correct length in 1/4" increments. The large, low profile head ensures a clean look and solid holding power. Screws are zinc plated and available in standard and metric sizes.…

    3 Review(s)
    $4.59
  4. G30 Clear Glass Knob

    G30 Clear Glass Knob

    Well-made glass pull gives any door or drawer a fresh, new look!* Finish: Clear* Diameter:1-3/16"* Projection:1-1/4"* Material: Glass* Screws are included

    $3.19
  5. G75 Clear Glass Knob with Brushed Nickel Base

    G75 Clear Glass Knob with Brushed Nickel Base

    Give your door or drawer a fresh, new look with this well-made Clear Glass Knob with Brushed Nickel Base!* Finish: Clear with brushed nickel base * Diameter: 1-1/4" * Projection: 1-1/8" * Material: Glass/metal * Screws are included

    $7.79
  6. M4 x 45mm Truss Head Break Away Screw (24 per Pack)

    M4 x 45mm Truss Head Break Away Screw (24 per Pack)

    Ideal for mounting cabinet knobs and pulls when material thickness varies, these truss head screws can be broken to the correct length in 1/4" increments. The large, low profile head ensures a clean look and solid holding power. Screws are zinc plated and available in standard and metric sizes.…

    2 Review(s)
    $6.29
  7. Solid Brass Knobs-Select size

    Solid Brass Knobs-Select size

    These brass knobs make excellent door and drawer pulls for small box projects. Polished finish provides an elegant look. Easy to install. Technical Details* Solid brass with steel screw* Screw length is 5/16"* Priced per pair

    17 Review(s)
    From: $4.19
  8. Surface Mounted Drawer Pull

    Surface Mounted Drawer Pull

    Sleek looking surface mounted oak pull. Sanded smooth and ready for finishing. Approximately 4-1/2" wide x 1-3/4" high overall. Mounts from the rear with machine screws included with the pull. Projects approximately 7/8" , 3-3/4 C - C boring.

    4 Review(s)
    $4.99
  9. Kreg Drawer Mounting Brackets

    Kreg Drawer Mounting Brackets

    …cabinet, simply clamp a bracket under each slide, set the drawer box into the drawer opening so it balances on the brackets and pull the slide to the front of the drawer box. Drive screws and you're done!* Works with Kreg Universal Drawer Slide Mounting Jig (#38444).* Includes left and right…

    1 Review(s)
    $9.99
  10. G40 Clear Glass Drawer Pull

    G40 Clear Glass Drawer Pull

    Transform the look of your drawer without spending a fortune!* Finish: Clear* Overall length: 4-1/8"* Projection: 1-1/2"* Material: Glass* Mounting holes: 3"* Screws are included

    $6.19
  11. Salice Futura Push-to-Open Drawer Slides

    Salice Futura Push-to-Open Drawer Slides

    …easy drawer installation and removal.* Drawer height adjustment with 3 mm range (about 1/8").* Drawer slides accept #6 wood screws or 6mm euro screws.* Minimum drawer side thickness is 1/2" (13mm).* Maximum drawer side thickness is 5/8" (16mm).* Load rating is 75 lbs dynamic, 100 lbs static.* Drawer

    2 Review(s)
    From: $29.99
  12. Rockler Deluxe Drawer Pull JIG IT®

    Rockler Deluxe Drawer Pull JIG IT®

    …template makes marking screw holes for knob and pull installation quick, simple and accurate.* Offers spacing for 2-1/2", 3", 3-1/2", 3-3/4", 4" and 96mm.* Includes 24" aluminum T-slot bar, left to right self-adhesive tape measure, stop block for repetitive drawer pull alignment, and automatic…

    28 Review(s)
    $39.99
  13. Small Wood Pull-Out Drawer, Wood - Maple (4WDB-12)

    Small Wood Pull-Out Drawer, Wood - Maple (4WDB-12)

    …wood drawer boxes for your kitchen presented by Rev-a-Shelf. Add functionality to your base cabinets. The dovetail construction, maple veneer plywood and concealed bottom mount slides are sturdy enough to handle years of use. * Euro slide with 3/4 extension* Simple installation with only 4 screws*

    $54.49
  14. Large Wood Pull-Out Drawer, Wood - Maple (4WDB-15)

    Large Wood Pull-Out Drawer, Wood - Maple (4WDB-15)

    …wood drawer boxes for your kitchen presented by Rev-a-Shelf. Add functionality to your base cabinets. The dovetail construction, maple veneer plywood and concealed bottom mount slides are sturdy enough to handle years of use. * Euro slide with 3/4 extension* Simple installation with only 4 screws*

    $62.99
  15. G34 Clear Glass Knob with Nickel Base

    G34 Clear Glass Knob with Nickel Base

    Update the look of a door or drawer without spending a lot of money!* Finish: Clear with nickel base* Diameter: 1-3/8"* Projection: 1-1/16"* Material: Glass/metal* Screws are included

    1 Review(s)
    $6.29
  16. Adjustable Pulls

    Adjustable Pulls

    …theclamping rings, loosen the set screws from the rings and slide the rings to thedesired location. Then tighten the set screws and bases. You're ready to install yourpull for a unique look. Adjustable to 4-1/4" from base to base. 4-3/4" overall length.Mounting screws included. Available in three…

    2 Review(s)
    $12.99
  17. G105 Clear Glass Knob with Brushed Nickel Base

    G105 Clear Glass Knob with Brushed Nickel Base

    Give your door or drawer a fresh, new look with this well-made Clear Glass Knob with Brushed Nickel Base!* Finish: Clear with brushed nickel base* Diameter: 1-1/4"* Projection: 1-7/16"* Material: Glass/metal* Screws are included

    $8.99
  18. Card Holders with Pulls

    Card Holders with Pulls

    Label holder features an integrated drawer pull - ideal for curio chests, file drawers, card catalogs, hardware and jewelry storage, mail sorting, or any small chest of drawers where organization is a priority. Available in a range of finishes. Includes screws. Sold singly. Made in USA. Technical…

    $1.99
  19. FastCap Miller FastBlock, 2-Pack

    FastCap Miller FastBlock, 2-Pack

    …the drawer guide. You can also use two Miller FastBlocks per side to block out drawer guides for pull-out shelves. Technical Details:* Adjusts up and down 3/16".* Adjusts in and out from 5/8" to 1".* Durable and permanent.* Flippable adjustment block accepts both wood screws and euro…

    1 Review(s)
    $1.99
  20. G105 Clear Glass Knob with Oil-Rubbed Bronze Base

    G105 Clear Glass Knob with Oil-Rubbed Bronze Base

    Update the look of your cabinet doors or drawers without spending a lot of money!* Finish: Clear with oil-rubbed bronze base* Diameter: 1-1/4"* Projection: 1-7/16"* Material: Glass/metal* Screws are included

    $8.39
  21. Belwith Catamaran Antique Brass Knob, P7513-WA

    Belwith Catamaran Antique Brass Knob, P7513-WA

    * Finish: Windsor Antique* Base Material: Zinc* Projection: 7/8"* Knob Diameter: 1-1/4"* Machine Screw Thread Size: #8-32* Screws are included* Warranty: Lifetime

    $5.59
  22. Berenson Lexington Antique Brass Knob, 9926-102-P

    Berenson Lexington Antique Brass Knob, 9926-102-P

    * Finish: Antique English* Base Material: ZINC* Projection: 7/8 Inch* Base Diameter: 5/16 Inch* Knob Diameter: 1-1/4 Inches* Machine Screw Thread Size: 8-32* Screw Length: 1 Inch* Pilot Hole Size: 3/16 Inch* Screws are included* Warranty: Lifetime

    0 Review(s)
    $4.99
  23. Home Bar Plan

    Home Bar Plan

    …restaurants (see hardware sold separately below). Bar Mirror Plan Requires:* 2 each - Door Pulls - Brass Finish - 3"* 2 each - Drawer Knobs - Brass Finish - 1-1/2"* 2 Pair - Drawer Slides - Full or 3/4 Extension* 8 each - 1/4" Shelf Pins* 2 pair - Full Overlay Hinges - Brass Finish* 1 each - #74032…

    $15.79
  24. 3-5/8"W x 2"H Recessed Pulls

    3-5/8"W x 2"H Recessed Pulls

    …pencil, preferably onto a strip of masking tape that will help to steady the drill.* Drill a pilot hole as a lead for the wood screw.* Remember, the included wood screws are made of brass so never overtighten or attempt to drive without a pilot hole, as this can cause them to break off in the wood.*…

    From: $25.99
  • Items 1 - 24 of 50
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X