Drawer Pulls

  • Items 1 - 24 of 105
  • Page:
    1. 1
    2. 2
    3. 3
  1. Adjustable Pulls

    Adjustable Pulls

    Set these solid pulls at the spacing you need to get the look you want! Bases areadjustable to fit pre-existing holes. Simply unscrew the bases completely from theclamping rings, loosen the set screws from the rings and slide the rings to thedesired location. Then tighten the set screws and bases.…

    2 Review(s)
    $12.99
  2. Amerock Bar Pulls, Oil Rubbed Bronze

    Amerock Bar Pulls, Oil Rubbed Bronze

    …without spending a lot of cash? Switch out your hardware for these Oil Rubbed Bronze Bar Pulls! The stylish pulls refresh the look of any kitchen and install in minutes using the two included screws. The pulls look great in the kitchen, they're easy to grab, and the 1-3/8" projection gives you room…

    From: $8.49
  3. G44 Clear Glass Pull with Nickel Base

    G44 Clear Glass Pull with Nickel Base

    The perfect finishing touch to your new drawer!* Finish: Clear with nickel base* Overall length: 4"* Projection: 1-1/4"* Material: Glass* Mounting holes: 3"* Screws are included

    $10.49
  4. Solid Brass 3-9/16"W x 1-3/4"H Recessed Pulls

    Solid Brass 3-9/16"W x 1-3/4"H Recessed Pulls

    …Once unpacked and in the tent, however, the furniture served as a beautiful reminder of home. Technical Details:* Solid brass recessed drawer pull.* Polished finish.* Dimensions: 3-9/16"W x 1-3/4"H.* Total depth: 7/16"* Projection from surface (if surface-mounted): approximately…

    From: $23.99
  5. Arts & Crafts Collection Stickley Dark Copper V Pull

    Arts & Crafts Collection Stickley Dark Copper V Pull

    …re-issued by the Stickley Furniture Company exclusively for Rockler! These pulls duplicate the hand-hammered texture of the originals and are finished to a warm, glowing patina.* Choose from two sizes of V drawer pulls in Dark Copper.* Cast copper.* Includes mounting hardware. Patterned from the…

    3 Review(s)
    $19.59
  6. Amerock Highland Ridge Polished Nickel Pull 96mm

    Amerock Highland Ridge Polished Nickel Pull 96mm

    * Finish: Polished Nickel* Base Material: Zinc* Length: 5 1/6 inch* Width: 4/7 inch* Projection: 1 1/7 inch* Center to Center Hole Spacing: 96mm* Machine Screw Thread Size: 2 x #8 32 x 1 inch* Screws are included* Warranty: Lifetime

    $9.99
  7. Surface Mounted Drawer Pull

    Surface Mounted Drawer Pull

    Sleek looking surface mounted oak pull. Sanded smooth and ready for finishing. Approximately 4-1/2" wide x 1-3/4" high overall. Mounts from the rear with machine screws included with the pull. Projects approximately 7/8" , 3-3/4 C - C boring.

    4 Review(s)
    $4.99
  8. Solid Brass 2-1/2"W x 1-1/2"H Recessed Pulls

    Solid Brass 2-1/2"W x 1-1/2"H Recessed Pulls

    …wagon. Once unpacked and in the tent, however, the furniture served as a beautiful reminder of home. Technical Details:* Solid brass recessed drawer pull.* Polished finish.* Dimensions: 2-1/2"W x 1-1/2"H.* Total depth: 3/8"* Projection from surface (if surface-mounted): approximately…

    From: $20.99
  9. Berenson Lexington Antique Brass Knob, 9926-102-P

    Berenson Lexington Antique Brass Knob, 9926-102-P

    * Finish: Antique English* Base Material: ZINC* Projection: 7/8 Inch* Base Diameter: 5/16 Inch* Knob Diameter: 1-1/4 Inches* Machine Screw Thread Size: 8-32* Screw Length: 1 Inch* Pilot Hole Size: 3/16 Inch* Screws are included* Warranty: Lifetime

    0 Review(s)
    $4.99
  10. Amerock Allison Value Hardware Ring Pull, BP886-AE

    Amerock Allison Value Hardware Ring Pull, BP886-AE

    Install antique brass plated ring pulls to give your furniture a vintage look and feel. The swing handle makes it easy to pull doors and drawers open and is also part of the overall decorative look of the piece. Technical Details* 1-3/4" overall length* 1" diameter backplate* 1-9/16" wide swing…

    $4.99
  11. Continuous Pull in Oak

    Continuous Pull in Oak

    Makes a great trim and pull for cabinets, doors, drawers. 3/4" thick. 5mm wide by 8mm deep tenon. 10 ft. minimum, 2-5 ft random lengths. Available in Oak.

    2 Review(s)
    $8.69
  12. Kreg Drawer Mounting Brackets

    Kreg Drawer Mounting Brackets

    …cabinet, simply clamp a bracket under each slide, set the drawer box into the drawer opening so it balances on the brackets and pull the slide to the front of the drawer box. Drive screws and you're done!* Works with Kreg Universal Drawer Slide Mounting Jig (#38444).* Includes left and right…

    1 Review(s)
    $9.99
  13. Arts & Crafts Collection Stickley Dark Copper Pull

    Arts & Crafts Collection Stickley Dark Copper Pull

    …been re-issued by the Stickley Furniture Company exclusively for Rockler! These pulls duplicate the hand-hammered texture of the originals and are finished to a warm, glowing patina.* Choose from two sizes of drawer pulls in Dark Copper.* Cast copper.* Includes mounting hardware. Patterned from the…

    11 Review(s)
    From: $18.19
  14. Arts & Crafts Light Copper Stickley Drawer Pulls

    Arts & Crafts Light Copper Stickley Drawer Pulls

    …designs of Gustav and Leopold Stickley, this cast copper hardware has been re-issued by the Stickley Furniture Company exclusively for Rockler! These pulls duplicate the hand-hammered texture of the originals and are finished to a warm, glowing patina.* Cast copper.* Includes mounting hardware.

    1 Review(s)
    $24.69
  15. Deluxe Sewing Center Plan

    Deluxe Sewing Center Plan

    …instructions on how to build a sewing cabinet featuring extension tops that fold out in two directions to double your work surface, multiple storage drawers and a special serger compartment. (Sewing Center Hardware Kit and Lift Mechanism Sold Separately.)* Base cabinet in the plan measures 48-1/2"…

    25 Review(s)
    $13.95
  16. Rockler Dovetail Router Bits - 1/2" Shank

    Rockler Dovetail Router Bits - 1/2" Shank

    …and jewelry boxes, shaker furniture and shadow boxes, sliding dovetail joints for table and leg extensions, or sliding drawer and shelf runners and dividers. Smaller degree bits can be used for stair tread stringer mortising or shelf supports. Larger diameter bits can produce unique finger pulls.

    2 Review(s)
    From: $14.99
  17. Card Holders with Pulls

    Card Holders with Pulls

    Label holder features an integrated drawer pull - ideal for curio chests, file drawers, card catalogs, hardware and jewelry storage, mail sorting, or any small chest of drawers where organization is a priority. Available in a range of finishes. Includes screws. Sold singly. Made in USA. Technical…

    $1.99
  18. Fold Out Ironing Board, Rev-a-Shelf VIB Series

    Fold Out Ironing Board, Rev-a-Shelf VIB Series

    Our unique pull-out ironing board can easily be retrofitted and folds away neatly into the space of a drawer. Rev-A-Shelf has ironed out the inconvenience of storing and setting up that bulky ironing board with the introduction of its VIB series. Ironing Board size is 12" X 37-1/2". DETAILS PER SKU:…

    1 Review(s)
    $183.99
  19. Drawer Stops

    Drawer Stops

    Great prevention from pulling drawer out too far.* Drawer stops are excellent for protecting curious children from pulling drawers out too far.* Prevents contents from being spilled over the floor.* Drill one hole to install.* 4 per pack.

    $4.99
  20. StealthLock Keyless Cabinet Locking System SL-100

    StealthLock Keyless Cabinet Locking System SL-100

    …unlimited number of receiver latches within a 15 foot range using the code you programmed! Easy to use and prevents unwanted access to doors and drawers throughout your home or business. Multiple locking modes. Operates on four "AAA" batteries (not included) and a CR232 coin battery (included). *…

    $137.59
  21. Salice Futura Push-to-Open Drawer Slides

    Salice Futura Push-to-Open Drawer Slides

    Just apply pressure to the drawer front and the drawer opens enough for you to pull it open on glassy smooth ball-bearing slides. The full-extension action provides easy access to the contents of the drawer. Push-open slides are ideal for cabinets without knobs or pulls, either for a clean, modern…

    2 Review(s)
    From: $29.99
  22. Pantry Slides

    Pantry Slides

    A great choice for kitchen cabinet or other storage pull outs. Strength, safety, and convenience! One slide is rated up to 225 Pounds! Undermount Extension Slide (30818):* One slide can handle up to 225 pounds, two slides are rated for 450 pounds!* One slide fits units up to 14 inches wide.* Slides…

    5 Review(s)
    $88.19
  23. Belwith Tranquility Satin Nickel w/Black Pull

    Belwith Tranquility Satin Nickel w/Black Pull

    * Finish: Satin Nickel with Black* Base Material: Zinc* Length: 5"* Width: 3/4"* Projection: 1"* Center to Center Hole Spacing: 3"* Machine Screw Thread Size: #8-32* Screws are included* Warranty: Lifetime

    $4.99
  24. Birch Pullout Shelf Kit for Kitchen or Bath

    Birch Pullout Shelf Kit for Kitchen or Bath

    …more convenient reach is needed with Birch Pullout Shelf Kits for your Kitchen or Bath! Simply measure your cabinet opening, subtract 1" for the drawer slides and cut your shelving. Includes hardware and instructions for one shelf. Note: If the shelf is cut to 15" wide or less, with an optional…

    58 Review(s)
    $79.99
  • Items 1 - 24 of 105
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X