Dressing

  • Items 1 - 24 of 27
  • Page:
    1. 1
    2. 2
  1. Grinding Wheel Dressing Stick

    Grinding Wheel Dressing Stick

    …and running smoothly. Dress it quickly to achieve a faster cut, or slowly to achieve the finest polish. Technical Details:* The Norton Grinding Wheel Dressing Stick measures 1" x 1" x 6".* Silicon Carbide, Medium abrasive.* Dressing sticks are used for truing and dressing bench and pedestal grinding…

    $10.99
  2. DMT Duo-Sharp Diamond Stones

    DMT Duo-Sharp Diamond Stones

    These dual-sided stones will helps you sharpen, hone, abrade, lap and dress your woodworking tools and knives faster than ever! Precision flatness, durable construction. Available in two grit combinations.* 22513 is fine (600 mesh, 25 micron)/extra fine (1200 mesh, 9 micron)* 22524 is coarse (325…

    2 Review(s)
    $104.99
  3. Oneway Termite Hollowing Tool Package

    Oneway Termite Hollowing Tool Package

    …at end grain, pommels on spindles can be cut unbelievably clean. Package includes #1 (3/8") and #2 (1/2") Termite bits, a mounted sharpening point dressed to the proper angle, a fixture to hold the Termite for grinding, a hex key and a grinding block. Technical Details:* Made from high speed steel.*…

    2 Review(s)
    $99.79
  4. Bendix Embossed Right and Left Feather Ornament

    Bendix Embossed Right and Left Feather Ornament

    Ideal for dressing up the corners of your project. Each piece is precisely shaped, sanded and ready for finishing. Ornaments measure 1-1/2"W x 4-1/2"H and are made of plywood with a Luan veneer. Lefts and rights sold separately.

    $2.49
  5. Norton White Aluminum Oxide Grinding Wheels-6" Grinding Wheels

    Norton White Aluminum Oxide Grinding Wheels-6" Grinding Wheels

    …vitrified white bond, which allows the grains of abrasive to wear off, providing a consistently fresh grinding surface.* The 6" wheels have a 1" arbor hole with bushings for 7/8", 3/4", 5/8" and 1/2" arbors.* Recommended for maximum 4140 RPM for 6" Wheels.* Dressing stone stick No longer available.

    15 Review(s)
    $21.49
  6. Norton White Aluminum Oxide Grinding Wheels-8" Grinding Wheels

    Norton White Aluminum Oxide Grinding Wheels-8" Grinding Wheels

    …which allows the grains of abrasive to wear off, providing a consistently fresh grinding surface.* 8" dia. wheelshave 1" width and 1" dia. arbor hole; includes reducer bushing to fit 3/4" and 5/8" shafts.* Recommended for maximum 3600 RPM for 8" Wheels.* Dressing stone stick No longer available.

    15 Review(s)
    $34.49
  7. Wooden Toy Vehicle Accessories-Select Option

    Wooden Toy Vehicle Accessories-Select Option

    Dress up wooden toy cars, trucks, tractors and more with these ready to use accessories. Toy headlights and steering wheels are finely crafted from northern hardwoods and arrive ready to finish.

    3 Review(s)
    From: $0.99
  8. Nova Sharpening Center Attachment

    Nova Sharpening Center Attachment

    …platform supports bowl gouges, spindle gouges and roughing gouges, while the diagonal sections are for skew chisels. The slideway can also be used to dress the grinding wheel (dresser not included), essential for the best sharpening results. * Controlled slideway provides precision sharpening with a…

    $104.99
  9. Tormek T-7 Sharpening System

    Tormek T-7 Sharpening System

    …a large, flat reference surface, there is no risk of rocking or tipping once the jig is tightened down. The T-7 also includes the new Truing and Dressing Tool, which uses a diamond cutter to return worn, out-of-round wheels to like-new condition. Precision screw feed allows you to grade the wheel…

    8 Review(s)
    $665.00
  10. Tormek® Sharpening System with Handtool Kit

    Tormek® Sharpening System with Handtool Kit

    …a large, flat reference surface, there is no risk of rocking or tipping once the jig is tightened down. The T-7 also includes the new Truing and Dressing Tool, which uses a diamond cutter to return worn, out-of-round wheels to like-new condition. Precision screw feed allows you to grade the wheel…

    $849.00
  11. Decorative Chain Support

    Decorative Chain Support

    This decorative chain is the ideal way to support and dress up a box or chest lid. Chain and mounting hardware are brass plated and polished. Measures 7-3/4" long with 5/16" x 1" mounting plates. Technical Details* Brass plated chain and mounting hardware* Chain is 7-3/4" long* Includes #4 x 5/8"…

    11 Review(s)
    $15.39
  12. Essex Plain Columns-3-1/2"W x 36" Length

    Essex Plain Columns-3-1/2"W x 36" Length

    A classic design with a subtly curving column capped off by a simple capital and base.These are perfect for island corners - simply cut a V-notch in one corner of the leg. Or you can halve them or quarter them to dress up the faces of cabinets. The columns are 36" tall, and a width of 3-1/2" square.

    From: $62.49
  13. Essex Plain Columns-4-1/2"W x 36" Length

    Essex Plain Columns-4-1/2"W x 36" Length

    A classic design with a subtly curving column capped off by a simple capital and base. These are perfect for island corners - simply cut a V-notch in one corner of the leg. Or you can halve them or quarter them to dress up the faces of cabinets. The columns are 36" tall and a width of 4-1/2" square.

    From: $123.39
  14. Essex Fluted Columns-3-1/2"W x 36" Length

    Essex Fluted Columns-3-1/2"W x 36" Length

    …fluted design with a subtly curving column capped off by a simple capital and base. These are perfect for island corners - simply cut a V-notch in one corner of the leg. Or you can halve them or quarter them to dress up the faces of cabinets. The columns are 36" tall, and a width of 3-1/2" square.

    From: $87.19
  15. Essex Fluted Columns-4-1/2"W x 36" Length

    Essex Fluted Columns-4-1/2"W x 36" Length

    …fluted design with a subtly curving column capped off by a simple capital and base. These are perfect for island corners - simply cut a V-notch in one corner of the leg. Or you can halve them or quarter them to dress up the faces of cabinets. The columns are 36" tall, and a width of 4-1/2" square.

    From: $143.69
  16. Tormek® Ultimate Bundle

    Tormek® Ultimate Bundle

    …a large, flat reference surface, there is no risk of rocking or tipping once the jig is tightened down. The T-7 also includes the new Truing and Dressing Tool, which uses a diamond cutter to return worn, out-of-round wheels to like-new condition. Precision screw feed allows you to grade the wheel…

    $1,315.00
  17. Tormek® Magnum Bundle

    Tormek® Magnum Bundle

    …a large, flat reference surface, there is no risk of rocking or tipping once the jig is tightened down. The T-7 also includes the new Truing and Dressing Tool, which uses a diamond cutter to return worn, out-of-round wheels to like-new condition. Precision screw feed allows you to grade the wheel…

    $1,149.00
  18. Tormek T-7 40th Anniversary Limited Edition Sharpening System

    Tormek T-7 40th Anniversary Limited Edition Sharpening System

    …With chisels and plane blades mounted firmly on a flat reference surface, there is no risk of tipping. The T-7 also includes the new Truing and Dressing Tool, which uses a diamond cutter to return worn out wheels to like-new condition. The precision screw feed lets you grade the wheel for a fine or…

    $639.00
  19. Morris Square Tapering Columns-3-1/2"W x 42" Length

    Morris Square Tapering Columns-3-1/2"W x 42" Length

    …base and crown, making them perfect for island corners - simply cut a V-notch in one corner of the leg. Or you can halve them or quarter them to dress up the faces of base cabinets. Choose in Cheery, Maple or Red Oak. 3-1/2" Width x 42" Length. Technical Details:* Gives any project an elegant,…

    From: $113.39
  20. Morris Square Tapering Columns-4-1/2"W x 42" Length

    Morris Square Tapering Columns-4-1/2"W x 42" Length

    …base and crown, making them perfect for island corners - simply cut a V-notch in one corner of the leg. Or you can halve them or quarter them to dress up the faces of base cabinets. Choose in Cheery, Maple or Red Oak in two column heights: 36" and 42", and in two widths: 3-1/2" and 4-1/2". Technical…

    From: $156.99
  21. Morris Square Tapering Columns-3-1/2"W x 36" Length

    Morris Square Tapering Columns-3-1/2"W x 36" Length

    …base and crown, making them perfect for island corners - simply cut a V-notch in one corner of the leg. Or you can halve them or quarter them to dress up the faces of base cabinets. Choose in Cheery, Maple or Red Oak. 3-1/2" Width x 36" Length. Technical Details:* Gives any project an elegant,…

    From: $92.69
  22. Morris Square Tapering Columns-4-1/2"W x 36" Length

    Morris Square Tapering Columns-4-1/2"W x 36" Length

    …base and crown, making them perfect for island corners - simply cut a V-notch in one corner of the leg. Or you can halve them or quarter them to dress up the faces of base cabinets. Choose in Cheery, Maple or Red Oak. 4-1/2" Width x 36" Length. Technical Details:* Gives any project an elegant,…

    From: $141.79
  23. Diamond Tread Aluminum Sheet, 12'' x 24'' x 0.02''

    Diamond Tread Aluminum Sheet, 12'' x 24'' x 0.02''

    …sheet. At 0.020'' thick, it's easy to cut and form for a variety of applications. Use it to add that iconic heavy-duty look to your toolboxes or to dress up small projects to fit into a modern or industrial-themed decor. The sheets are pre-cut at 1' x 2' and are sold singly. Designed primarily for…

    $19.99
  24. Interlocking Wood Grain Anti-Fatigue Mats - 24'' x 24''

    Interlocking Wood Grain Anti-Fatigue Mats - 24'' x 24''

    …have to mean a sacrifice in style. That's why these interlocking puzzle mats feature a wood-grain finish for a perfect blend of form and function. Dress up your laundry room while providing a soft insulating layer for your feet. Make your play room more friendly for little knees and easier on the…

    2 Review(s)
    $29.99
  • Items 1 - 24 of 27
  • Page:
    1. 1
    2. 2
Feedback X