Drill Bit Collar

  • Items 1 - 24 of 36
  • Page:
    1. 1
    2. 2
  1. 7-Pc. Split Collar Set

    7-Pc. Split Collar Set

    …onto the drill bit, and tighten the single 1/8" hex screw. The split ring design tightens fully around the drill bit securing it in place. No damage to the drill's side edges or flutes will occur! Stop Collars allow you to set precise cutting depths on any countersink or drill bit with a…

    9 Review(s)
    $14.49
  2. Dowelmax Replacement Drill Bit and Collar

    Dowelmax Replacement Drill Bit and Collar

    A replacement 3/8" drill bit and collar for the Dowelmax Classic and Dowelmax Jr. doweling jigs.

    $16.50
  3. Clamp Tite Drill Stop

    Clamp Tite Drill Stop

    …split collar design applies tight, even pressure around the perimeter of the bit. Because of this, it resists loosening and shifting, which can mar the drill bit and unexpectedly change drilling depth. Use a 7/64" Allen wrench to tighten and loosen the drill stop. * For 3/8" drill bits* Split collar

    2 Review(s)
    $4.79
  4. Beadlock® Pro Joinery Kit

    Beadlock® Pro Joinery Kit

    …Jig, 3/8" drill bit, 3/8" stop collar, 3/8" Beadlock® guide block, 3/8" mortise paring guide block and a molded plastic case with added space for the optional accessory kits. All Accessory Kits include corresponding guide block, mortise paring guide block, HSS drill bit and stop collar. For more…

    32 Review(s)
    $137.99
  5. Kreg® Deck Drill Bit/Depth Collar

    Kreg® Deck Drill Bit/Depth Collar

    Stepped drill bit design is made specifically for work with the Kreg® Deck Jig System (36613, sold separately). Includes a depth collar so your pilot holes will be uniform in diameter, depth, angle and position when you drill with the Deck Jig System. Also includes an allen wrench.

    $16.99
  6. Kreg Micro Pocket Drill Guide

    Kreg Micro Pocket Drill Guide

    …stock, picture frames, small drawerboxes, etc.). When that's the case this miniature drill guide is ideal. It has a 25% smaller hole diameter and includes a Micro Pocket™ Drill Guide, Drill Bit and Depth Collar, as well as a Starter Screw Set. Replacement accessories sold separately. Technical…

    8 Review(s)
    $44.95
  7. Long Shank Carbide Forstner Bits - Standard Sizes

    Long Shank Carbide Forstner Bits - Standard Sizes

    …quality carbide tipped bits are designed to drill flat-bottomed holes. Use with a drill press, or with a hand drill and our exclusive JIG IT® Drill Guide. All Forstner bits have a 3/8" diameter shank and require a 3/8" stop collar if used with the JIG IT Drill Guide. These long shanks…

    2 Review(s)
    From: $21.99
  8. Rockler 1/4'' Dowel Drilling Jig Kit

    Rockler 1/4'' Dowel Drilling Jig Kit

    …parts together, strike a line across the face of the joint and line up the jig* Made to last with a 3/16" acrylic face and hardened steel drill guides* 1/4" guide has holes spaced 3/4"-on-center* Jig is designed to center dowel holes on 1/2" thick stock. Drill Bit Stop Collar and Stop Collar Wrench

    4 Review(s)
    $17.99
  9. Rockler/Insty-Drive Tapered Drill Bits and Countersinks

    Rockler/Insty-Drive Tapered Drill Bits and Countersinks

    Tapered drill bits and countersinks are made of high-quality high speed steel (HSS). Both tapered bits and countersinks are removable and adjustable. Hex collars and hex shanks fit our Rockler exclusive Insty-Driver. Nine-piece countersink set shown includes 3 countersinks with tapered drill bits

    22 Review(s)
    From: $19.99
  10. Kreg Toolboxx™

    Kreg Toolboxx™

    With 15 removable storage bins for screws, 3 fixed storage compartments for drill bits, drivers and stop collars, and a vast storage space below for jigs,clamps and drill guides, the Kreg Toolboxx is more than capable of housing your entire Kreg Pocket Jig collection in one easily accessible space.…

    0 Review(s)
    $79.99
  11. 3/8" Stop Collar for all #5 & #12

    3/8" Stop Collar for all #5 & #12

    3/8" Stop Collar for all Rockler/Insty-Drive #5 & #12 Tapered Drill Bits and Countersinks (59933 and 59963, sold separately).

    $5.99
  12. Kreg Jig® HD Drill Bit

    Kreg Jig® HD Drill Bit

    …with quick-change chuck.* Also works with standard chucks.* 1/2" diameter.* High-speed steel.* Rugged one-piece, hardened steel construction. * For use with the Kreg Jig® HD Heavy Duty Pocket Hole System (#46791, sold separately). * Pocket hole drill bit includes stop collar and allen wrench.

    1 Review(s)
    $19.99
  13. Rockler/Insty-Drive Tapered Drill Bits and Countersinks-Replacement Tapered Drill Bits

    Rockler/Insty-Drive Tapered Drill Bits and Countersinks-Replacement Tapered Drill Bits

    Tapered drill bits and countersinks are made of high-quality high speed steel (HSS). Both tapered bits and countersinks are removable and adjustable. Hex collars and hex shanks fit our Rockler exclusive Insty-Driver. Nine-piece countersink set shown includes 3 countersinks with tapered drill bits

    22 Review(s)
    From: $7.99
  14. Rockler/Insty-Drive Tapered Drill Bits and Countersinks

    Rockler/Insty-Drive Tapered Drill Bits and Countersinks

    Tapered drill bits and countersinks are made of high-quality high speed steel (HSS). Both tapered bits and countersinks are removable and adjustable. Hex collars and hex shanks fit our Rockler exclusive Insty-Driver. Nine-piece countersink set shown includes 3 countersinks with tapered drill bits

    22 Review(s)
    $40.49
  15. Fuller 1/4'' Quick Change Taper Drill Set

    Fuller 1/4'' Quick Change Taper Drill Set

    Our top-line taper drill set with quick-change chuck allows you to quickly and efficiently pre-drill, countersink, counterbore and cut plugs.* Includes 3/8" shank quick-change chuck, five 1/4" shank countersinks with tapered drill bits, two stop collars, two 1/4" shank plug cutters (3/8" and 1/2"),…

    1 Review(s)
    $169.99
  16. #8 Pro Tapered Countersink Bit

    #8 Pro Tapered Countersink Bit

    …remarkable efficiency and leave a perfectly clean rim, even in delicate veneers. Tapered pilot bits are fully adjustable and replaceable, and feature a flattened shank for a no-slip connection to the countersink. Each bit also includes an adjustable stop collar and a hex wrench for all adjustments.

    $30.99
  17. #6 Pro Tapered Countersink Bit

    #6 Pro Tapered Countersink Bit

    …remarkable efficiency and leave a perfectly clean rim, even in delicate veneers. Tapered pilot bits are fully adjustable and replaceable, and feature a flattened shank for a no-slip connection to the countersink. Each bit also includes an adjustable stop collar and a hex wrench for all adjustments.

    $20.99
  18. #5 Pro Tapered Countersink Bit

    #5 Pro Tapered Countersink Bit

    …delicate veneers. Tapered pilot bits are fully adjustable and replaceable and feature a flattened shank for a no-slip connection to the countersink. Each bit also includes an adjustable stop collar and a hex wrench for adjustments. Replacement #5 Pro Tapered Pilot Bits can be purchased individually…

    $22.49
  19. Festool Centrotec® Bit Holder BHS 65mm

    Festool Centrotec® Bit Holder BHS 65mm

    …of force, eliminating bit slippage or marring of the drill bit. The weight of the drill is reduced by nearly ? pound, and the length is reduced by nearly 1-1/2" with the Centrotec System. Most importantly, the Centrotec system offers a quicker and more secure means of bit change than any other…

    $25.00
  20. Rockler 3/8'' Dowel Drilling Jig Kit

    Rockler 3/8'' Dowel Drilling Jig Kit

    …center.* Convenient hanging hole* Precise centerline for the joint, plus center lines for two dowels* Measures 2" x 4-1/2"* Drill guide is 3/4" thick, perfect for 3/4" face frames* Jig is designed to center dowel holes on 3/4" thick stock.* Jig includes Drill Bit, Stop Collar, and Stop Collar Wrench

    45 Review(s)
    $19.99
  21. Rockler 1/2'' Dowel Drilling Jig Kit

    Rockler 1/2'' Dowel Drilling Jig Kit

    Jig Now Includes Drill Bit, Stop Collar, and Stop Collar Wrench for Added Convenience! An incredibly affordable doweling jig for those who want a quick joint without the fussy layout. Rockler Doweling Jigs are transparent, you need only set the two parts together, strike a line across the face of…

    $24.99
  22. Kreg Stop Collar/Hex Wrench

    Kreg Stop Collar/Hex Wrench

    Kreg Stop Collar/Hex Wrench for the Mini Kreg Jig and Kit (60370, sold separately) helps ensure precise depth of pocket holes. Works with any 3/8" Kreg pocket-hole drill bit.

    $4.19
  23. Rockler/Insty-Drive Self-Centering Bits

    Rockler/Insty-Drive Self-Centering Bits

    The Rockler Insty-Drive 3-Pc. Self-Centering Bit Set includes #4, #6 and #8 self-centering HSS drill bits that conveniently fit in heavy-duty nylon storage pouch. The Self-centering bits feature a hex collar that allows for use with the Rockler/Insty-Drive exclusive Insty-Driver. You'll get…

    60 Review(s)
    $32.99
  24. 1/4" Beadlock® Pro Accessory Kit

    1/4" Beadlock® Pro Accessory Kit

    The Beadlock® Pro Accessory Kit include corresponding guide block, mortise paring guide block, HSS drill bit and stop collar. For use with the Beadlock® Pro Joinery Kit.

    $59.99
  • Items 1 - 24 of 36
  • Page:
    1. 1
    2. 2
Feedback X