Drill Bit Depth Stop

  • Grid List
  • Page:
    1. 1
  • Items 1 - 12 of 12
  • Page:
    1. 1
  1. 7-Pc. Split Collar Set

    7-Pc. Split Collar Set

    …onto the drill bit, and tighten the single 1/8" hex screw. The split ring design tightens fully around the drill bit securing it in place. No damage to the drill's side edges or flutes will occur! Stop Collars allow you to set precise cutting depths on any countersink or drill bit with a…

    11 Review(s)
    $14.49
  2. Clamp Tite Drill Stop

    Clamp Tite Drill Stop

    …even pressure around the perimeter of the bit. Because of this, it resists loosening and shifting, which can mar the drill bit and unexpectedly change drilling depth. Use a 7/64" Allen wrench to tighten and loosen the drill stop. * For 3/8" drill bits* Split collar design helps prevent slippage*…

    2 Review(s)
    $4.79
  3. DeWalt DWP611PK Compact Router With Trim Router Table and Dust Port

    DeWalt DWP611PK Compact Router With Trim Router Table and Dust Port

    …speed under load. Intuitive depth adjustment ring, quick-release tabs and adjustable clamp make adjustments a snap. 1/4'' collet is extra-long for better contact with the bit, and the spindle lock features a large button and 12 detentes for easy bit changes. * Router Type: Combination…

    $273.48
  4. Kreg Toolboxx w/Pocket Hole Start Up Kit

    Kreg Toolboxx w/Pocket Hole Start Up Kit

    …your material, then use the jig to drill your holes. Once you've tried Kreg pocket hole joinery, you'll wonder how you ever got along without it. Kreg Large Toolboxx™: With removable bins for screws, fixed storage compartments for drill bits,drivers and stop collars, and a vast storage space…

    $106.00
  5. Jet® JMD-18 Mill/Drill with R-8 Taper, 115/230V, Single-Phase

    Jet® JMD-18 Mill/Drill with R-8 Taper, 115/230V, Single-Phase

    …spindle when lateral forces are exerted on the bit* Heavy-duty tapered roller bearings support the spindle, resulting in greater tolerance and more accurate drilling depth* Base taper allows for easier clean up* Larger hand wheel knobs* Drill press angle vise* UL Listed motor* Extra large worktable*…

    $2,299.00
  6. Dowel Pro Jig

    Dowel Pro Jig

    Delivers the precision demanded by professional woodworkers. Precisely aligned guides for 1/4" , 5/16" and 3/8" holes. Handles stock ranging from 1/2" to 1-1/4" , includes precise depth stops for 1/4" , 5/16" and 3/8" drill bits. An assortment of dowel pins is included with the jig. Aluminum.

    27 Review(s)
    $42.99
  7. Rockler/Insty-Drive Tapered Drill Bits and Countersinks-Replacement Tapered Drill Bits

    Rockler/Insty-Drive Tapered Drill Bits and Countersinks-Replacement Tapered Drill Bits

    …Nine-piece countersink set shown includes 3 countersinks with tapered drill bits perfectly matched for #6, #8 and #10 screws, a 3/8" stop collar for countersink depth, #1 and #2 Phillips bits, #1 and #2 Square Drive bits and a sturdy nylon case plus an allen wrench for all adjustments. OPTIONAL…

    22 Review(s)
    From: $7.99
  8. Rockler/Insty-Drive Tapered Drill Bits and Countersinks

    Rockler/Insty-Drive Tapered Drill Bits and Countersinks

    …Insty-Driver. Nine-piece countersink set shown includes 3 countersinks with tapered drill bits perfectly matched for #6, #8 and #10 screws, a 3/8" stop collar for countersink depth, #1 and #2 Phillips bits, #1 and #2 Square Drive bits and a sturdy nylon case plus an allen wrench for all adjustments.

    22 Review(s)
    $40.49
  9. Jet® Benchtop Mortising Machine

    Jet® Benchtop Mortising Machine

    …operation and optimum handle position* Three-jaw drill chuck keeps a positive grip on mortising bits with up to 3/8" diameter shanks* Two hinged side doors allow easy access to the drill chuck* Quick adjust depth stop for uniform mortise depths* Column is reversible for mortising larger stock*…

    2 Review(s)
    $354.99
  10. Solid Brass Lid Support Hinge

    Solid Brass Lid Support Hinge

    …and drill to the appropriate depth. Hinges can also be surface-mounted. Includes screws. Technical Details:* Hinges measure approximately 35mm in diameter (1-3/8") so they work with a standard 35mm hinge cup drilling bit.* Hinges can be mortised in or surface mounted.* Integral stop holds…

    1 Review(s)
    $22.99
  11. Kreg Stop Collar/Hex Wrench

    Kreg Stop Collar/Hex Wrench

    Kreg Stop Collar/Hex Wrench for the Mini Kreg Jig and Kit (60370, sold separately) helps ensure precise depth of pocket holes. Works with any 3/8" Kreg pocket-hole drill bit.

    $4.19
  12. Powermatic® Benchtop Deluxe Mortiser

    Powermatic® Benchtop Deluxe Mortiser

    …allows the user to easily access the drill chuck with the standard 4" chuck key to lock the bit in place. In addition, its rack and pinion allow for simple and quick fence adjustments.* In-line depth stop allows stopping at pre-set depths without racking the bit to the base * Heavy-duty reversible…

    1 Review(s)
    $489.99
  • Grid List
  • Page:
    1. 1
  • Items 1 - 12 of 12
  • Page:
    1. 1
Feedback X