Drill Bit Gauge

  • Grid List
  • Page:
    1. 1
  • Items 1 - 14 of 14
  • Page:
    1. 1
  1. 20 Piece Wire Gauge Drill Set

    20 Piece Wire Gauge Drill Set

    …20-Pc. Wire Gauge Drill Set includes 20 different size drill bits ranging from No. 61 (.039") to No. 80 (.0135"). Convenient indexed plastic case also included. Optional Micro Chuck:* Micro Drill Chuck (28215) secures drill bits too small for a regular chuck.* Compatible with drill bit sizes ranging…

    14 Review(s)
    $8.49
  2. Digital Angle Gauge w/Flip-Out Display

    Digital Angle Gauge w/Flip-Out Display

    …angles, or use it to set the angle on bandsaw tables, drill press tables and jointer fences. For example, you can attach it to the drill bit in your drill press (using the V-groove feature for round items), zero the gauge, then set the gauge on your table and adjust the angle as desired. Of course,…

    $49.99
  3. Betterley UNA-GAUGE Universal Alignment and Adjustment Gauge

    Betterley UNA-GAUGE Universal Alignment and Adjustment Gauge

    …you to:* Check and adjust table saw blade/miter slot alignment* Set table saw blade and router bit height quickly and accurately* Check for runout in arbors, spindles, blades and bits* Square drill press tables/spindles* Fine tune fence settings on table saws, router tables and shapers* Set jointer…

    3 Review(s)
    $199.99
  4. Wixey Remote Digital Readout

    Wixey Remote Digital Readout

    ….001* Fraction: +/- 1/500* Metric: +/- .05 Additional Specifications:* Adapts to most commercial router lifts.* Requires drilling two small holes in your machine (drill bit supplied).* Includes sensor, display, 3 foot cord and all mounting hardware.* Now uses AAA Batteries for operation (included).…

    3 Review(s)
    $79.99 $66.99

    SAVE 16%

  5. Stainless Steel Nails for Shutter System

    Stainless Steel Nails for Shutter System

    …and corrosion.* 7/8" long.* 16 gauge nails.* Use the Shutter System Hidden Control Arm Jig Kit (45143, sold separately) to drill perfectly-sized pilot holes for the nails in the louvers. Kit includes jig, 1.2mm self centering bit and one replacement drill bit. Jig precisely aligns the pilot hole…

    $2.99
  6. Mag-Dro Magnetic Caliper Base

    Mag-Dro Magnetic Caliper Base

    …shaft of your dial caliper, allowing you to use it as a basic setup gauge on table saws, band saws, drill presses and more. Also great for checking runout on blades and bits. Technical Details:* Check for runout on blades or bits or use it to align the fence - the uses are limited only by your…

    1 Review(s)
    $10.49
  7. Dewalt DW920K-2 Heavy-Duty 1/4'' 6mm 7.2V Cordless Two-Position Screwdriver Kit

    Dewalt DW920K-2 Heavy-Duty 1/4'' 6mm 7.2V Cordless Two-Position Screwdriver Kit

    …provides 0-500 rpm* Industrial quick-release hex-shank chuck allows for quick screwdriver bit change and prevents bit "run out" Includes: * 1 hour charger* (2) 7.2V compact batteries* 2 screwdriver bits* heavy-duty kit box Features & Benefits: * 80 in-lbs of maximum torque output provides for a…

    1 Review(s)
    $90.99
  8. Dado Jig for Low Profile Straight Edge Clamp System

    Dado Jig for Low Profile Straight Edge Clamp System

    …tool-free.* Built in scale makes it easy to gauge your offset for the second shoulder of your dado.* Dado Jig is made of sturdy, low-friction ABS.* Jig is pre-drilled to fit most routers with a standard 3-hole pattern, and can be easily drilled to fit any other router.* Includes detailed…

    1 Review(s)
    $44.99
  9. Rockler High Pressure Laminate Router Table Top

    Rockler High Pressure Laminate Router Table Top

    gauges.* MDF core with high pressure laminates on both top and bottom faces. To choose a plate, find your router in one of the four groups below. If your router is not listed, choose one of two non-drilled blank plates: the Standard Opening (3-1/4" bit opening), or the Large Opening (3-11/16" bit

    1 Review(s)
    $99.99
  10. Rockler High Pressure Laminate Router Table, Fence, Plate, & Stand

    Rockler High Pressure Laminate Router Table, Fence, Plate, & Stand

    …below. If your router is not listed, choose one of two non-drilled blank plates: the Standard Opening (3-1/4'' bit opening), or the Large Opening (3-11/16'' bit opening), and drill custom mounting holes.* Group A routers: Makita 1100; Milwaukee 5615-5624; DeWalt 616-618; Bosch 1617-1618; Ridgid…

    3 Review(s)
    $349.99
  11. Rockler Pro Phenolic Router Table, Fence & Plate

    Rockler Pro Phenolic Router Table, Fence & Plate

    …of the four groups below. If your router is not listed, choose either the Standard Blank Plate (with a 3-1/4" bit opening) or the Large Blank Plate (with a 3-11/16" bit opening) and drill custom mounting holes.* Group A routers: Makita 1100; Milwaukee 5615-5624; DeWalt 616-618; Bosch 1617-1618;…

    2 Review(s)
    $399.99
  12. Rockler Pro Phenolic Router Table, Fence, Plate & Stand

    Rockler Pro Phenolic Router Table, Fence, Plate & Stand

    …the four groups below. If your router is not listed, choose either the Standard Blank Plate (with a 3-1/4'' bit opening) or the Large Blank Plate (with a 3-11/16'' bit opening) and drill custom mounting holes.* Group A routers: Makita 1100; Milwaukee 5615-5624; DeWalt 616-618; Bosch 1617-1618;…

    $499.99
  13. Rockler High Pressure Laminate Router Table, Fence & Plate With FREE 6-Piece Router Accessory Kit

    Rockler High Pressure Laminate Router Table, Fence & Plate With FREE 6-Piece Router Accessory Kit

    …of the four groups below. If your router is not listed, choose either the Standard Blank Plate (with a 3-1/4'' bit opening) or the Large Blank Plate (with a 3-11/16'' bit opening) and drill custom mounting holes. * Group A routers: Makita 1100; Milwaukee 5615-5624; DeWalt 616-618; Bosch 1617-1618;…

    1 Review(s)
    $299.98 $249.99

    SAVE 17%

  14. Kreg® Precision Router Table System With FREE Kreg® Precision Setup Bars

    Kreg® Precision Router Table System With FREE Kreg® Precision Setup Bars

    …plate drilling program available. Kreg® Precision Setup Bars Features:* 3-in-1 bars act as a step gauge, depth gauge, and fence gauge* Fence gauge: makes positioning your fence quick and easy* Depth gauge: straddles your reducing rings for fast and easy bit height adjustments* Step gauge: Test…

    1 Review(s)
    $540.99 $499.00
  • Grid List
  • Page:
    1. 1
  • Items 1 - 14 of 14
  • Page:
    1. 1
Feedback X