Drill Collar

  • Items 1 - 24 of 40
  • Page:
    1. 1
    2. 2
  1. 7-Pc. Split Collar Set

    7-Pc. Split Collar Set

    …pack). Select the proper collar diameter, slide it onto the drill bit, and tighten the single 1/8" hex screw. The split ring design tightens fully around the drill bit securing it in place. No damage to the drill's side edges or flutes will occur! Stop Collars allow you to set precise cutting…

    11 Review(s)
    $14.49
  2. Rockler 1/2'' Dowel Drilling Jig Kit

    Rockler 1/2'' Dowel Drilling Jig Kit

    Jig Now Includes Drill Bit, Stop Collar, and Stop Collar Wrench for Added Convenience! An incredibly affordable doweling jig for those who want a quick joint without the fussy layout. Rockler Doweling Jigs are transparent, you need only set the two parts together, strike a line across the face of…

    $24.99
  3. Clamp Tite Drill Stop

    Clamp Tite Drill Stop

    …split collar design applies tight, even pressure around the perimeter of the bit. Because of this, it resists loosening and shifting, which can mar the drill bit and unexpectedly change drilling depth. Use a 7/64" Allen wrench to tighten and loosen the drill stop. * For 3/8" drill bits* Split collar

    2 Review(s)
    $4.79
  4. Rockler/Insty-Drive Tapered Drill Bits and Countersinks

    Rockler/Insty-Drive Tapered Drill Bits and Countersinks

    Tapered drill bits and countersinks are made of high-quality high speed steel (HSS). Both tapered bits and countersinks are removable and adjustable. Hex collars and hex shanks fit our Rockler exclusive Insty-Driver. Nine-piece countersink set shown includes 3 countersinks with tapered drill bits…

    22 Review(s)
    $40.49
  5. Kreg Quick Change Kit

    Kreg Quick Change Kit

    …from drilling to driving in seconds with this simple kit! It provides everythingyou need: an innovative Quick-Change Chuck, a 6" long #2 Square Driver, and thenew 3/8" Hex-Shank Pocket Hole Drill Bit (with depth collar and allen wrench). Additional features:* All new 3/8" Hex-Shank Step Drill Bit…

    5 Review(s)
    $29.39
  6. #8 Pro Tapered Countersink Bit

    #8 Pro Tapered Countersink Bit

    …remarkable efficiency and leave a perfectly clean rim, even in delicate veneers. Tapered pilot bits are fully adjustable and replaceable, and feature a flattened shank for a no-slip connection to the countersink. Each bit also includes an adjustable stop collar and a hex wrench for all adjustments.

    $30.99
  7. Kreg R3 Pocket Hole System

    Kreg R3 Pocket Hole System

    …materials from 1/2" to 1-1/2" thick in 1/8" increments.* Hardened steel drill guides with lifetime warranty.* With wood chip relief holes and clamp adapter.* Kit includes the R3 Jig with a clamp pad adapter, step drill bit, depth collar and Allen wrench, 6" driver bit, and sample screws and plugs.*…

    32 Review(s)
    $39.95
  8. Rockler 3/8'' Dowel Drilling Jig Kit

    Rockler 3/8'' Dowel Drilling Jig Kit

    …center.* Convenient hanging hole* Precise centerline for the joint, plus center lines for two dowels* Measures 2" x 4-1/2"* Drill guide is 3/4" thick, perfect for 3/4" face frames* Jig is designed to center dowel holes on 3/4" thick stock.* Jig includes Drill Bit, Stop Collar, and Stop Collar Wrench

    46 Review(s)
    $19.99 $14.99

    SAVE 25%

  9. Rockler Doweling Jigs Case

    Rockler Doweling Jigs Case

    …Doweling Jigs, plus the corresponding drill bits and stop collars in one handy blow-molded case! No need to rummage through your drill bits when it's time to do some doweling, with this case it's all at your fingertips. Jigs, drill bits and stop collars sold separately. Technical Details:*…

    $8.49
  10. Rockler/Insty-Drive Tapered Drill Bits and Countersinks

    Rockler/Insty-Drive Tapered Drill Bits and Countersinks

    Tapered drill bits and countersinks are made of high-quality high speed steel (HSS). Both tapered bits and countersinks are removable and adjustable. Hex collars and hex shanks fit our Rockler exclusive Insty-Driver.

    22 Review(s)
    $19.99
  11. Fuller 1/4'' Quick Change Taper Drill Set

    Fuller 1/4'' Quick Change Taper Drill Set

    Our top-line taper drill set with quick-change chuck allows you to quickly and efficiently pre-drill, countersink, counterbore and cut plugs.* Includes 3/8" shank quick-change chuck, five 1/4" shank countersinks with tapered drill bits, two stop collars, two 1/4" shank plug cutters (3/8" and 1/2"),…

    1 Review(s)
    $169.99
  12. 3/8" Stop Collar for all #5 & #12

    3/8" Stop Collar for all #5 & #12

    3/8" Stop Collar for Rockler Instry Drive 5 through 12 Tapered Drill Bits and Countersinks (59933 and 59963, sold separately).

    $5.99
  13. Kreg® Deck Drill Bit/Depth Collar

    Kreg® Deck Drill Bit/Depth Collar

    Stepped drill bit design is made specifically for work with the Kreg® Deck Jig System (36613, sold separately). Includes a depth collar so your pilot holes will be uniform in diameter, depth, angle and position when you drill with the Deck Jig System. Also includes an allen wrench.

    $16.99
  14. Dowelmax Replacement Drill Bit and Collar

    Dowelmax Replacement Drill Bit and Collar

    A replacement 3/8" drill bit and collar for the Dowelmax Classic and Dowelmax Jr. doweling jigs.

    $16.50
  15. Kreg Micro Pocket Depth Collar

    Kreg Micro Pocket Depth Collar

    The Micro Pocket™ Depth Collar for the Micro Pocket® Drill Guide (33984, sold separately) helps you drill pocket holes to the right depth every time.

    $2.39
  16. Kreg Micro Pocket Drill Guide

    Kreg Micro Pocket Drill Guide

    …stock, picture frames, small drawerboxes, etc.). When that's the case this miniature drill guide is ideal. It has a 25% smaller hole diameter and includes a Micro Pocket™ Drill Guide, Drill Bit and Depth Collar, as well as a Starter Screw Set. Replacement accessories sold separately. Technical…

    8 Review(s)
    $44.95
  17. Kreg Jig® HD Drill Bit

    Kreg Jig® HD Drill Bit

    …with quick-change chuck.* Also works with standard chucks.* 1/2" diameter.* High-speed steel.* Rugged one-piece, hardened steel construction. * For use with the Kreg Jig® HD Heavy Duty Pocket Hole System (#46791, sold separately). * Pocket hole drill bit includes stop collar and allen wrench.

    1 Review(s)
    $19.99
  18. Rockler/Insty-Drive Tapered Drill Bits and Countersinks-Replacement Tapered Drill Bits

    Rockler/Insty-Drive Tapered Drill Bits and Countersinks-Replacement Tapered Drill Bits

    Tapered drill bits and countersinks are made of high-quality high speed steel (HSS). Both tapered bits and countersinks are removable and adjustable. Hex collars and hex shanks fit our Rockler exclusive Insty-Driver. Nine-piece countersink set shown includes 3 countersinks with tapered drill bits…

    22 Review(s)
    From: $7.99
  19. Rockler 1/4'' Dowel Drilling Jig Kit

    Rockler 1/4'' Dowel Drilling Jig Kit

    …parts together, strike a line across the face of the joint and line up the jig* Made to last with a 3/16" acrylic face and hardened steel drill guides* 1/4" guide has holes spaced 3/4"-on-center* Jig is designed to center dowel holes on 1/2" thick stock. Drill Bit Stop Collar and Stop Collar Wrench

    6 Review(s)
    $17.99
  20. Kreg Stop Collar/Hex Wrench

    Kreg Stop Collar/Hex Wrench

    Kreg Stop Collar/Hex Wrench for the Mini Kreg Jig and Kit (60370, sold separately) helps ensure precise depth of pocket holes. Works with any 3/8" Kreg pocket-hole drill bit.

    $4.19
  21. Festool FastFix® FX Eccentric Chuck

    Festool FastFix® FX Eccentric Chuck

    …close-quarters drilling and driving so you can place holes and fasteners near-perfectly adjacent to walls and into corners. Significantly faster and easier than the alternative of driving screws in tight spaces manually. Chuck rotates 360 degrees with 16 presets. Quick-release collar will not mar…

    $120.00
  22. Long Shank Carbide Forstner Bits-Metric Sizes

    Long Shank Carbide Forstner Bits-Metric Sizes

    …carbide tipped bits are designed to drill flat-bottomed holes. Use with a drill press, or with a hand drill and our exclusive JIG IT® Drill Guide. All Forstner bits have a 3/8" diameter shank and require a 3/8" stop collar if used with the JIG IT Drill Guide. These long shanks are 3-7/8" long.…

    1 Review(s)
    From: $36.99
  23. Rockler 1/4" Beadlock® Pro Accessory Kit

    Rockler 1/4" Beadlock® Pro Accessory Kit

    The Beadlock® Pro Accessory Kit include corresponding guide block, mortise paring guide block, HSS drill bit and stop collar. For use with the Beadlock® Pro Joinery Kit.

    $59.99
  24. Rockler 1/2" Beadlock® Pro Accessory Kit

    Rockler 1/2" Beadlock® Pro Accessory Kit

    The Beadlock® Pro Accessory Kit include corresponding guide block, mortise paring guide block, HSS drill bit and stop collar. For use with the Beadlock® Pro Joinery Kit.

    $47.99
  • Items 1 - 24 of 40
  • Page:
    1. 1
    2. 2
Feedback X