Drill Depth

  • Items 1 - 24 of 79
  • Page:
    1. 1
    2. 2
    3. 3
  1. Clamp Tite Drill Stop

    Clamp Tite Drill Stop

    …way to control drilling depth. Unlike stop collars that use a single set screw, the split collar design applies tight, even pressure around the perimeter of the bit. Because of this, it resists loosening and shifting, which can mar the drill bit and unexpectedly change drilling depth. Use a 7/64"…

    2 Review(s)
    $4.79
  2. Jet® 15'' Bench Mount Drill Press

    Jet® 15'' Bench Mount Drill Press

    …mounting a fence when table is in reverse position * Depth stop displays inch/mm and has a quick set bolt for fast, accurate adjustments * Spindle has high-quality ball bearing construction for long life * Adjustable tension spindle return spring is ideal for repetitive drilling of the same depth

    $532.00
  3. Kreg® Deck Drill Bit/Depth Collar

    Kreg® Deck Drill Bit/Depth Collar

    Stepped drill bit design is made specifically for work with the Kreg® Deck Jig System (36613, sold separately). Includes a depth collar so your pilot holes will be uniform in diameter, depth, angle and position when you drill with the Deck Jig System. Also includes an allen wrench.

    $16.99
  4. Kreg Micro Pocket Depth Collar

    Kreg Micro Pocket Depth Collar

    The Micro Pocket™ Depth Collar for the Micro Pocket® Drill Guide (33984, sold separately) helps you drill pocket holes to the right depth every time.

    $2.39
  5. FastFix® FX Depth Stop Chuck

    FastFix® FX Depth Stop Chuck

    …between drill and driving functions in seconds with the FastFix interface, saving time and eliminating the cost of dedicated, single purpose tools. The Festool FastFix Depth Stop Chuck is designed for consistent, precise depth setting regardless of material density. Integrated clutch maintains depth

    $120.00
  6. Kreg Portable Drill Base

    Kreg Portable Drill Base

    …jig for work on the road!* Secures to most Kreg Face Clamps* Can be clamped vertically to your work surface using a standard "C" clamp* Ensures proper drilling depth by setting your drill guide block at the proper height for various material thicknesses* Includes brass positioning pin* Made in USA

    $19.99
  7. Mini-X Quick Drill Kit

    Mini-X Quick Drill Kit

    …any raised portion. *The depth drilled determines the depth of insertion. This not only allows users to countersink, tap flush, or leave raised, but also gives woodworkers the option to only use a portion of the dowel. If only 2 ½ sections of the drill bit is used, then only 2 ½…

    7 Review(s)
    $27.99
  8. Mini-X Tru-Fit Drill Bit

    Mini-X Tru-Fit Drill Bit

    …any raised portion. *The depth drilled determines the depth of insertion. This not only allows users to countersink, tap flush, or leave raised, but also gives woodworkers the option to only use a portion of the dowel. If only 2 ½ sections of the drill bit is used, then only 2 ½…

    $10.99
  9. Jet® 12'' Benchtop Drill Press

    Jet® 12'' Benchtop Drill Press

    …JET® BENCH 12" Variable Speed Drill Press. A powerful 1/3 HP induction motor that pushes through almost anything you throw at it; over 3-1/8" spindle travel for maximum depth cutting, and our innovative X-shaped XACTA Laser that ensures drilling accuracy; makes this workhorse the best…

    2 Review(s)
    $374.99
  10. Kreg Micro Pocket Drill Guide

    Kreg Micro Pocket Drill Guide

    …stock, picture frames, small drawerboxes, etc.). When that's the case this miniature drill guide is ideal. It has a 25% smaller hole diameter and includes a Micro Pocket™ Drill Guide, Drill Bit and Depth Collar, as well as a Starter Screw Set. Replacement accessories sold separately. Technical…

    8 Review(s)
    $44.95
  11. Rockler/Insty-Drive Tapered Drill Bits and Countersinks-Replacement Tapered Drill Bits

    Rockler/Insty-Drive Tapered Drill Bits and Countersinks-Replacement Tapered Drill Bits

    …Rockler exclusive Insty-Driver. Nine-piece countersink set shown includes 3 countersinks with tapered drill bits perfectly matched for #6, #8 and #10 screws, a 3/8" stop collar for countersink depth, #1 and #2 Phillips bits, #1 and #2 Square Drive bits and a sturdy nylon case plus an allen wrench…

    22 Review(s)
    From: $7.99
  12. Jet® 17'' Floor Mount Drill Press

    Jet® 17'' Floor Mount Drill Press

    …Adjustable tension spindle return spring is ideal for repetitive drilling of the same depth * Powered by a heavy-duty 3/4HP, 1Ph 115/230V TEFC motor and poly-v belt drive system * Clutch-type drill stop regulates drilling depth * Drill press is designed for left or right hand operators, handles can…

    1 Review(s)
    $609.99
  13. Jet® 15'' Floor Mount Drill Press

    Jet® 15'' Floor Mount Drill Press

    …allow mounting a fence when table is in reverse position* Depth stop displays inch/mm and has a quick set bolt for fast, accurate adjustments* Spindle has high-quality ball bearing construction for long life* Adjustable tension spindle return spring is ideal for repetitive drilling of the same depth

    $549.99
  14. 1x Miller Quick Drill Kit - Each

    1x Miller Quick Drill Kit - Each

    …any raised portion. *The depth drilled determines the depth of insertion. This not only allows users to countersink, tap flush, or leave raised, but also gives woodworkers the option to only use a portion of the dowel. If only 2 ½ sections of the drill bit is used, then only 2 ½…

    8 Review(s)
    $34.99
  15. Rockler/Insty-Drive Tapered Drill Bits and Countersinks

    Rockler/Insty-Drive Tapered Drill Bits and Countersinks

    …Rockler exclusive Insty-Driver. Nine-piece countersink set shown includes 3 countersinks with tapered drill bits perfectly matched for #6, #8 and #10 screws, a 3/8" stop collar for countersink depth, #1 and #2 Phillips bits, #1 and #2 Square Drive bits and a sturdy nylon case plus an allen wrench…

    22 Review(s)
    $40.49
  16. DeWalt Hammer Drill Bit - 1/8'' x 3''

    DeWalt Hammer Drill Bit - 1/8'' x 3''

    …ROCK CARBIDE™ Shank 3" Hammer Drill Bits. Each is built to last with ROCK CARBIDE tips, an elongated flour flute helix for faster material removal, and a NO-SPIN shank. Technical Details* Longer life* Faster drilling* NO-SPIN shank* 2" drill depth with 3" overall length* ROCK CARBIDE…

    $4.19
  17. Hinge Cup Drilling Jigs

    Hinge Cup Drilling Jigs

    Here's an accurate and inexpensive way to set up your drill press for making holes for 35 mm and 26 mm cup hinges. Simply align your fence with the jig and drill. You'll get consistently accurate holes set to the proper depth and the ability to position quickly and easily! Hinge Cup Jig A is used on…

    6 Review(s)
    $7.69
  18. Rockler Pro Shelf Drilling Jig

    Rockler Pro Shelf Drilling Jig

    …ends of each guide rail when not in use* Drilling template is made of thick acrylic for durability* Designed for un-assembled cabinet components from 8-1/4"W to 25-1/4"W Self-Centering Drill Bits: Self-centering bits are pre-set to bore a consistent depth for perfect fitting shelf pins and sleeves…

    16 Review(s)
    $84.99
  19. 35MM Euro Hinge Drilling Jig

    35MM Euro Hinge Drilling Jig

    Ideal for large projects, this jig drills the standard 35mm cup hole and hinge screw pattern for Euro-style hinges using three integrated, permanently mounted drill bits. All of the bits are hex drive, so you can quickly drill all three holes without having to change tooling. The jig has indexed…

    4 Review(s)
    $234.99
  20. Pro Shelf Drilling Jig with 1/4'' Shelf Drilling Bit and Case

    Pro Shelf Drilling Jig with 1/4'' Shelf Drilling Bit and Case

    …ends of each guide rail when not in use* Drilling template is made of thick acrylic for durability* Designed for un-assembled cabinet components from 8-1/4"W to 25-1/4"W Self-Centering Drill Bits: Self-centering bits are pre-set to bore a consistent depth for perfect fitting shelf pins and sleeves…

    $111.47
  21. JET® JMD-15 Mill/Drill With R-8 Taper

    JET® JMD-15 Mill/Drill With R-8 Taper

    …more accurate drilling depth* Base taper allows for easier clean up* Larger hand wheel knobs* Drill press angle vise* UL Listed motor* Extra large worktable* 360° head swivel* Work lamp* Heavy-duty power downfeed with manual fine feed* 1/2'' drill chuck, chuck arbor* Draw bar* Drill chuck guard*…

    $1,699.00
  22. Jet® JMD-18 Mill/Drill with R-8 Taper, 115/230V, Single-Phase

    Jet® JMD-18 Mill/Drill with R-8 Taper, 115/230V, Single-Phase

    …more accurate drilling depth* Base taper allows for easier clean up* Larger hand wheel knobs* Drill press angle vise* UL Listed motor* Extra large worktable* 360° head swivel* Work lamp* Heavy-duty power downfeed with manual fine feed* 1/2'' drill chuck, chuck arbor* Draw bar* Drill chuck guard*…

    $2,299.00
  23. 1-2-3 MicroGage

    1-2-3 MicroGage

    Bring machine shop accuracy to your workshop! Align, measure, calibrate and tunea variety of tools including routers, shapers, jointers, planers, drill presses, fences andmore. 1-2-3 block is made of hardened tool steel and ground to 0.0002" for ultraprecision. Dial indicator has 1" travel with…

    1 Review(s)
    $119.00
  24. Kreg Quick Change Kit

    Kreg Quick Change Kit

    …from drilling to driving in seconds with this simple kit! It provides everythingyou need: an innovative Quick-Change Chuck, a 6" long #2 Square Driver, and thenew 3/8" Hex-Shank Pocket Hole Drill Bit (with depth collar and allen wrench). Additional features:* All new 3/8" Hex-Shank Step Drill Bit…

    5 Review(s)
    $29.39
  • Items 1 - 24 of 79
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X