Drill Guage

  • Items 1 - 24 of 41
  • Page:
    1. 1
    2. 2
  1. Bolt Size-It Gauge

    Bolt Size-It Gauge

    Quickly and easily size bolts, screws, nuts and twist drills! Bolt Size-It also features ruler marked with inches and millimeters.* Gauge metric hex nuts and washers by holding under metric holes.* Resists water, alcohol, oil and grease.* Hard plastic.

    4 Review(s)
    $5.49
  2. 20 Piece Wire Gauge Drill Set

    20 Piece Wire Gauge Drill Set

    …20-Pc. Wire Gauge Drill Set includes 20 different size drill bits ranging from No. 61 (.039") to No. 80 (.0135"). Convenient indexed plastic case also included. Optional Micro Chuck:* Micro Drill Chuck (28215) secures drill bits too small for a regular chuck.* Compatible with drill bit sizes ranging…

    14 Review(s)
    $8.49
  3. Jet® 17'' Floor Mount Drill Press

    Jet® 17'' Floor Mount Drill Press

    …Adjustable tension spindle return spring is ideal for repetitive drilling of the same depth * Powered by a heavy-duty 3/4HP, 1Ph 115/230V TEFC motor and poly-v belt drive system * Clutch-type drill stop regulates drilling depth * Drill press is designed for left or right hand operators, handles can…

    1 Review(s)
    $609.99
  4. Jet® JMD-18 Mill/Drill with R-8 Taper, 115/230V, Single-Phase

    Jet® JMD-18 Mill/Drill with R-8 Taper, 115/230V, Single-Phase

    …more accurate drilling depth* Base taper allows for easier clean up* Larger hand wheel knobs* Drill press angle vise* UL Listed motor* Extra large worktable* 360° head swivel* Work lamp* Heavy-duty power downfeed with manual fine feed* 1/2'' drill chuck, chuck arbor* Draw bar* Drill chuck guard*…

    $2,299.00
  5. Digital Angle Gauge w/Flip-Out Display

    Digital Angle Gauge w/Flip-Out Display

    …them. Use it on table saw blades to set bevel angles, or use it to set the angle on bandsaw tables, drill press tables and jointer fences. For example, you can attach it to the drill bit in your drill press (using the V-groove feature for round items), zero the gauge, then set the gauge on your…

    $49.99
  6. 45/90 Degree Layout Miter Gauge

    45/90 Degree Layout Miter Gauge

    …at the same time! Ideal for picture frames, corner molding, and various box constructions, this precise gauge also works to prep saw blades or drill presses for angled jobs. A balanced, wide-face design adds remarkable stability, while interior windows make marking parallel lines fast and easy.…

    5 Review(s)
    $27.99
  7. 45 Degree Stainless Steel Miter Gauge

    45 Degree Stainless Steel Miter Gauge

    …layout and tool setup. Mark 45° linesfor picture frames, corner molding, box constructions and more. Stand it upright andprep saw blades or drill press tables for angled applications. The interior windowmakes marking parallel lines fast and easy. And with a small footprint and lowprofiledesign,…

    $16.99
  8. Betterley UNA-GAUGE Universal Alignment and Adjustment Gauge

    Betterley UNA-GAUGE Universal Alignment and Adjustment Gauge

    …slot alignment* Set table saw blade and router bit height quickly and accurately* Check for runout in arbors, spindles, blades and bits* Square drill press tables/spindles* Fine tune fence settings on table saws, router tables and shapers* Set jointer cut depth and check beds for parallelism* Set…

    3 Review(s)
    $199.99
  9. iGaging 12'' Center Rule & Angle Gauge

    iGaging 12'' Center Rule & Angle Gauge

    Use this multifunction ruler to dial in the angle on your bevel gauge, find centers for drilling drawer knobs, set the height on your table saw or router table, or simply as a standard ruler. One face features a precision angle gaugefrom 0-50°, while the other has a 6" x 6" center rule along one…

    $19.99
  10. Galvanized Steel Sheet, 12'' x 24'' x 28 Gauge

    Galvanized Steel Sheet, 12'' x 24'' x 28 Gauge

    …project that will be exposed to the elements, or an indoor project in a kitchen or bath, you can be assured of a durable, attractive finish. The sheets are pre-cut at 1' x 2', a nice size for smaller projects and crafts, and are 28 gauge (0.015'' thick), which is easy to weld, form, hem and drill.

    $9.99
  11. Dewalt DW920K-2 Heavy-Duty 1/4'' 6mm 7.2V Cordless Two-Position Screwdriver Kit

    Dewalt DW920K-2 Heavy-Duty 1/4'' 6mm 7.2V Cordless Two-Position Screwdriver Kit

    Heavy-Duty 1/4" (6mm) 7.2V Cordless Two-Position Screwdriver Kit * 3 Year Limited Warranty* 80 in-lbs of maximum torque output provides for a superior power to weight ratio in a variety of fastening applications* Adjustable two-position handle allows for operation as both in-line and pistol-grip*…

    1 Review(s)
    $90.99
  12. 1-2-3 MicroGage

    1-2-3 MicroGage

    Bring machine shop accuracy to your workshop! Align, measure, calibrate and tunea variety of tools including routers, shapers, jointers, planers, drill presses, fences andmore. 1-2-3 block is made of hardened tool steel and ground to 0.0002" for ultraprecision. Dial indicator has 1" travel with…

    1 Review(s)
    $119.00
  13. Stop Block Kit

    Stop Block Kit

    Set it on the T-slot track for making the same length cuts over and over. You get a 5 star knob, a 1 1/2" long T-slot bolt and a 2" rabbeted stop block. Ideal for use on a drill press table, router table or miter gauge fence.

    2 Review(s)
    $8.19
  14. Stainless Steel Nails for Shutter System

    Stainless Steel Nails for Shutter System

    …7/8" long.* 16 gauge nails.* Use the Shutter System Hidden Control Arm Jig Kit (45143, sold separately) to drill perfectly-sized pilot holes for the nails in the louvers. Kit includes jig, 1.2mm self centering bit and one replacement drill bit. Jig precisely aligns the pilot hole location and depth.

    $2.99
  15. Mag-Dro Magnetic Caliper Base

    Mag-Dro Magnetic Caliper Base

    …adheres to any ferrous surface, and clamps to the shaft of your dial caliper, allowing you to use it as a basic setup gauge on table saws, band saws, drill presses and more. Also great for checking runout on blades and bits. Technical Details:* Check for runout on blades or bits or use it to align…

    1 Review(s)
    $10.49
  16. Hidden Control Arms for Shutter System

    Hidden Control Arms for Shutter System

    …unobstructed view out of your windows.* 18 gauge stainless steel for long life and rust prevention.* 54-5/16" long. Cut to length.* To install, drill 1.2mm pilot holes in the ends of the louvers, then drive Stainless Steel Nails (45400, sold separately).* 2-1/2" Hidden Control Arm will control…

    1 Review(s)
    $11.99
  17. Wixey Remote Digital Readout

    Wixey Remote Digital Readout

    ….001* Fraction: +/- 1/500* Metric: +/- .05 Additional Specifications:* Adapts to most commercial router lifts.* Requires drilling two small holes in your machine (drill bit supplied).* Includes sensor, display, 3 foot cord and all mounting hardware.* Now uses AAA Batteries for operation (included).…

    3 Review(s)
    $79.99
  18. Master Plate with Super Bar

    Master Plate with Super Bar

    …for aligning your equipment. The Super Bar jig has an-onboard precision dial indicator that measures alignment as it slides in the miter gauge slot. This enables you to keep the saw blade parallel, align the fence, square tour protractor, and check runout on routers, drill presses, and more!

    10 Review(s)
    From: $49.99
  19. Rockler 45 Degree Miter Sled

    Rockler 45 Degree Miter Sled

    …pins provide a no-slop fit to the miter track.* Through-slots in the base allow you to securely clamp moldings at table level.* Can be easily drilled to add extended fences and stops.* High-impact polycarbonate ensures durability and low-friction sliding.* Fits a standard 3/8" x 3/4" miter slot.*…

    85 Review(s)
    $25.99 $14.99

    SAVE 42%

  20. Rockler High Pressure Laminate Router Table, Fence, Plate, & Stand

    Rockler High Pressure Laminate Router Table, Fence, Plate, & Stand

    …patterns, ensuring perfect mounting and eliminating the "Swiss Cheese" catch points common on universal plates. With our new plates, there's no drilling required, so the router mounts perfectly right out of the box. The table includes a Dual Track combining a standard miter track for miter gauges,…

    3 Review(s)
    $349.99
  21. Woodworker's Journal Workshop Projects CD

    Woodworker's Journal Workshop Projects CD

    …Box Joint Jig* All-Purpose Shop Table* Adjustable V-block Jig* Ultimate Sharpening Station* Quick and Easy Band Saw Fence* Tilting Table for the Drill Press* Shop-built Panel Saw* Ultimate Fluting Jig* Fire-retardant Finishing Cabinet* Budget Workbench* Precision Crosscutting Jig* Craftsman's…

    $14.99
  22. Case of 25 Blum low-profile 3/4 extension drawer slides - 22'' drawer length, Brown

    Case of 25 Blum low-profile 3/4 extension drawer slides - 22'' drawer length, Brown

    …pairs. Use Blum Face Frame Spacers - Adjustable in 1/16" increments within the listed range by using supplied shims. Includes Euroscrew for 32mm drill patterns. Each set includes 4 blocks for 1 pair of slides. Use the JIG IT Template System or Blum Slide Jig Gun for quick, easy and accurate…

    7 Review(s)
    $157.49
  23. Bulk Pricing of Blum low-profile 3/4 extension drawer slides-White Slides

    Bulk Pricing of Blum low-profile 3/4 extension drawer slides-White Slides

    …pairs. Use Blum Face Frame Spacers- Adjustable in 1/16" increments within the listed range by using supplied shims. Includes Euroscrew for 32mm drill patterns. Each set includes 4 blocks for 1 pair of slides. Use the JIG IT Template System or Blum Slide Jig Gun for quick, easy and accurate…

    7 Review(s)
    From: $122.99
  24. Rockler High Pressure Laminate Router Table, Fence & Plate

    Rockler High Pressure Laminate Router Table, Fence & Plate

    …patterns, ensuring perfect mounting and eliminating the "Swiss Cheese" catch points common on universal plates. With our new plates, there's no drilling required, so the router mounts perfectly right out of the box. The table includes a Dual Track combining a standard miter track for miter gauges,…

    6 Review(s)
    $249.99
  • Items 1 - 24 of 41
  • Page:
    1. 1
    2. 2
Feedback X