Drill Stop Collars

  • Items 1 - 24 of 28
  • Page:
    1. 1
    2. 2
  1. Clamp Tite Drill Stop

    Clamp Tite Drill Stop

    Clamp Tite Drill Stops are the perfect way to control drilling depth. Unlike stop collars that use a single set screw, the split collar design applies tight, even pressure around the perimeter of the bit. Because of this, it resists loosening and shifting, which can mar the drill bit and…

    2 Review(s)
    $4.79
  2. 7-Pc. Split Collar Set

    7-Pc. Split Collar Set

    …pack). Select the proper collar diameter, slide it onto the drill bit, and tighten the single 1/8" hex screw. The split ring design tightens fully around the drill bit securing it in place. No damage to the drill's side edges or flutes will occur! Stop Collars allow you to set precise cutting…

    9 Review(s)
    $14.49
  3. Kreg Jig® K5 Pocket Hole System

    Kreg Jig® K5 Pocket Hole System

    …pin holds drill block in place, and can't get lost.* Storage wings provide built-in storage for bits, screws, accessories.* Stop-collar setting block makes drill bit setup easy.* Swiveling dust collection port accepts standard 1-1/4" vacuum hose.* Adjustable workpiece stop mounts on either…

    $139.00
  4. Long Shank Carbide Forstner Bits - Standard Sizes

    Long Shank Carbide Forstner Bits - Standard Sizes

    …carbide tipped bits are designed to drill flat-bottomed holes. Use with a drill press, or with a hand drill and our exclusive JIG IT® Drill Guide. All Forstner bits have a 3/8" diameter shank and require a 3/8" stop collar if used with the JIG IT Drill Guide. These long shanks are 3-7/8" long.…

    2 Review(s)
    From: $21.99
  5. Long Shank Carbide Forstner Bits-Metric Sizes

    Long Shank Carbide Forstner Bits-Metric Sizes

    …carbide tipped bits are designed to drill flat-bottomed holes. Use with a drill press, or with a hand drill and our exclusive JIG IT® Drill Guide. All Forstner bits have a 3/8" diameter shank and require a 3/8" stop collar if used with the JIG IT Drill Guide. These long shanks are 3-7/8" long.…

    1 Review(s)
    From: $36.99
  6. Rockler 1/4'' Dowel Drilling Jig Kit

    Rockler 1/4'' Dowel Drilling Jig Kit

    …parts together, strike a line across the face of the joint and line up the jig* Made to last with a 3/16" acrylic face and hardened steel drill guides* 1/4" guide has holes spaced 3/4"-on-center* Jig is designed to center dowel holes on 1/2" thick stock. Drill Bit Stop Collar and Stop Collar Wrench

    4 Review(s)
    $17.99
  7. #8 Pro Tapered Countersink Bit

    #8 Pro Tapered Countersink Bit

    …remarkable efficiency and leave a perfectly clean rim, even in delicate veneers. Tapered pilot bits are fully adjustable and replaceable, and feature a flattened shank for a no-slip connection to the countersink. Each bit also includes an adjustable stop collar and a hex wrench for all adjustments.

    $30.99
  8. Rockler/Insty-Drive Tapered Drill Bits and Countersinks

    Rockler/Insty-Drive Tapered Drill Bits and Countersinks

    …countersinks are removable and adjustable. Hex collars and hex shanks fit our Rockler exclusive Insty-Driver. Nine-piece countersink set shown includes 3 countersinks with tapered drill bits perfectly matched for #6, #8 and #10 screws, a 3/8" stop collar for countersink depth, #1 and #2 Phillips…

    22 Review(s)
    From: $19.99
  9. 3/8" Stop Collar for all #5 & #12

    3/8" Stop Collar for all #5 & #12

    3/8" Stop Collar for all Rockler/Insty-Drive #5 & #12 Tapered Drill Bits and Countersinks (59933 and 59963, sold separately).

    $5.99
  10. Kreg Stop Collar/Hex Wrench

    Kreg Stop Collar/Hex Wrench

    Kreg Stop Collar/Hex Wrench for the Mini Kreg Jig and Kit (60370, sold separately) helps ensure precise depth of pocket holes. Works with any 3/8" Kreg pocket-hole drill bit.

    $4.19
  11. Kreg Jig® HD Drill Bit

    Kreg Jig® HD Drill Bit

    …with quick-change chuck.* Also works with standard chucks.* 1/2" diameter.* High-speed steel.* Rugged one-piece, hardened steel construction. * For use with the Kreg Jig® HD Heavy Duty Pocket Hole System (#46791, sold separately). * Pocket hole drill bit includes stop collar and allen wrench.

    1 Review(s)
    $19.99
  12. Rockler/Insty-Drive Tapered Drill Bits and Countersinks-Replacement Tapered Drill Bits

    Rockler/Insty-Drive Tapered Drill Bits and Countersinks-Replacement Tapered Drill Bits

    …countersinks are removable and adjustable. Hex collars and hex shanks fit our Rockler exclusive Insty-Driver. Nine-piece countersink set shown includes 3 countersinks with tapered drill bits perfectly matched for #6, #8 and #10 screws, a 3/8" stop collar for countersink depth, #1 and #2 Phillips…

    22 Review(s)
    From: $7.99
  13. Fuller 1/4'' Quick Change Taper Drill Set

    Fuller 1/4'' Quick Change Taper Drill Set

    Our top-line taper drill set with quick-change chuck allows you to quickly and efficiently pre-drill, countersink, counterbore and cut plugs.* Includes 3/8" shank quick-change chuck, five 1/4" shank countersinks with tapered drill bits, two stop collars, two 1/4" shank plug cutters (3/8" and 1/2"),…

    1 Review(s)
    $169.99
  14. Rockler/Insty-Drive Tapered Drill Bits and Countersinks

    Rockler/Insty-Drive Tapered Drill Bits and Countersinks

    …countersinks are removable and adjustable. Hex collars and hex shanks fit our Rockler exclusive Insty-Driver. Nine-piece countersink set shown includes 3 countersinks with tapered drill bits perfectly matched for #6, #8 and #10 screws, a 3/8" stop collar for countersink depth, #1 and #2 Phillips…

    22 Review(s)
    $40.49
  15. Rockler 3/8'' Dowel Drilling Jig Kit

    Rockler 3/8'' Dowel Drilling Jig Kit

    …center.* Convenient hanging hole* Precise centerline for the joint, plus center lines for two dowels* Measures 2" x 4-1/2"* Drill guide is 3/4" thick, perfect for 3/4" face frames* Jig is designed to center dowel holes on 3/4" thick stock.* Jig includes Drill Bit, Stop Collar, and Stop Collar Wrench

    45 Review(s)
    $19.99
  16. Rockler 1/2'' Dowel Drilling Jig Kit

    Rockler 1/2'' Dowel Drilling Jig Kit

    Jig Now Includes Drill Bit, Stop Collar, and Stop Collar Wrench for Added Convenience! An incredibly affordable doweling jig for those who want a quick joint without the fussy layout. Rockler Doweling Jigs are transparent, you need only set the two parts together, strike a line across the face of…

    $24.99
  17. 1/4" Beadlock® Pro Accessory Kit

    1/4" Beadlock® Pro Accessory Kit

    The Beadlock® Pro Accessory Kit include corresponding guide block, mortise paring guide block, HSS drill bit and stop collar. For use with the Beadlock® Pro Joinery Kit.

    $59.99
  18. 1/2" Beadlock® Pro Accessory Kit

    1/2" Beadlock® Pro Accessory Kit

    The Beadlock® Pro Accessory Kit include corresponding guide block, mortise paring guide block, HSS drill bit and stop collar. For use with the Beadlock® Pro Joinery Kit.

    $47.99
  19. Rockler Doweling Jigs Case

    Rockler Doweling Jigs Case

    …Doweling Jigs, plus the corresponding drill bits and stop collars in one handy blow-molded case! No need to rummage through your drill bits when it's time to do some doweling, with this case it's all at your fingertips. Jigs, drill bits and stop collars sold separately. Technical Details:*…

    $8.49
  20. Beadlock® Pro Joinery Kit

    Beadlock® Pro Joinery Kit

    …Jig, 3/8" drill bit, 3/8" stop collar, 3/8" Beadlock® guide block, 3/8" mortise paring guide block and a molded plastic case with added space for the optional accessory kits. All Accessory Kits include corresponding guide block, mortise paring guide block, HSS drill bit and stop collar. For more…

    32 Review(s)
    $137.99
  21. Complete Doweling Jig Kit

    Complete Doweling Jig Kit

    Includes all three of our jigs - 1/4", 3/8" and 1/2" - complete with the corresponding drill bits, stop collars, and a hardshell case. Rockler Doweling Jigs are transparent - just set the two parts together, strike a line across the face of the joint, then line up the jig. The transparent face lets…

    $59.99
  22. Minifix (KD) Fittings-Minifix Fittings

    Minifix (KD) Fittings-Minifix Fittings

    …Template An easy to use marking and drilling guide for 3/4" Minifix fasteners (#22161 only). Mark location of cam holes with a center punch. Includes drill guide bushing for drilling 8mm horizontal hole. Includes clamp and drill guide. Drill bits and Stop Collars For 3/4" Minifix, use #28516 8mm…

    14 Review(s)
    $7.39
  23. Kreg Toolboxx™

    Kreg Toolboxx™

    With 15 removable storage bins for screws, 3 fixed storage compartments for drill bits, drivers and stop collars, and a vast storage space below for jigs,clamps and drill guides, the Kreg Toolboxx is more than capable of housing your entire Kreg Pocket Jig collection in one easily accessible space.…

    0 Review(s)
    $79.99
  24. Kreg Toolboxx w/Pocket Hole Start Up Kit

    Kreg Toolboxx w/Pocket Hole Start Up Kit

    …material, then use the jig to drill your holes. Once you've tried Kreg pocket hole joinery, you'll wonder how you ever got along without it. Kreg Large Toolboxx™: With removable bins for screws, fixed storage compartments for drill bits,drivers and stop collars, and a vast storage space below…

    $106.00
  • Items 1 - 24 of 28
  • Page:
    1. 1
    2. 2
Feedback X