Drill Chuck

  • Items 1 - 24 of 102
  • Page:
    1. 1
    2. 2
    3. 3
  1. Lathe Chuck and Tapers

    Lathe Chuck and Tapers

    1/2"drill chuck for lathe and two choices of morse tapers. Use this drill chuck and either the #1 Morse taper or #2 Morse taper listed to assemble as shown. Key is supplied with chuck. Both #20777 and either #20785 or #20793 need to be ordered to complete assembly as shown. This assembly is used on…

    9 Review(s)
    From: $16.99
  2. Micro Drill Chuck

    Micro Drill Chuck

    drilling jobs, this specially-machined 4-jaw chuck fits in standard chucks to securely hold the smallest drill bits - ranging from #61 (.039") down to #97 (.0059"). It is ideal for close-up drilling on delicate work pieces like miniatures, model clocks, jewelry, electronics, and more!* The chuck's

    3 Review(s)
    $11.49
  3. Nova Soft Jaw Set

    Nova Soft Jaw Set

    …turned, sawn, drilled or tapped.* Because they are made of nylon, they hold most woods without marking.* Vibrant red color makes it easy to see profiles. By machining the profile after mounting, you can eliminate any errors that may have added up from mounting the jaws to the chuck, then to the…

    $18.99
  4. Rockler Insty-Drive Quick-Change Chuck

    Rockler Insty-Drive Quick-Change Chuck

    …operation - push in accessory to insert, pull out sleeve to release * Safety Hold Mechanism prevents tools from falling out when chuck in in release position * Quick change hex shank design optimizes drill torque * Fits all keyed and keyless chucks * Works in all corded and cordless drills

    1 Review(s)
    $16.99
  5. Mini-X Quick Drill Kit

    Mini-X Quick Drill Kit

    …from 1x, 2x or NEW Mini-X Quick Drill kits, which include stepped drill bit and 50 Birch dowels. Dowels available in three sizes: 1x for boards up to 1" thick, and 2x for boards up to 1-3/4" thick and NEW Mini-X for joining 1/2" stock. Drill bits fit 3/8" chuck. Additional packs of 25 dowels also…

    7 Review(s)
    $25.99
  6. Powermatic® Wood Lathe 3HP

    Powermatic® Wood Lathe 3HP

    …accurate speed adjustments* Spindle lock and built-in spindle indexing on the headstock for drilling hole patterns, routing flutes and other equally spaced features* Vacuum system provides quick method of chucking bowl blanks* 15-amp quad receptacle for easy reach of powered accessories* Two 100W…

    $7,499.99
  7. Stainless Steel Pizza Cutter Turning Kit, Brass Finish

    Stainless Steel Pizza Cutter Turning Kit, Brass Finish

    chuck in your drill press. Tighten the two nuts on the insert so it won't spin on the bolt. After the pilot hole is drilled in the stock, clamp your stock with a handscrew or a drill press vise and manually turn the drill press chuck to drive the insert into the stock. Safety Tip: MAKE SURE DRILL

    $19.99
  8. Pocket Hole Quick Change Adapter Set

    Pocket Hole Quick Change Adapter Set

    chuck.* Safety Hold Mechanism prevents tools from falling out when chuck is in release position.* Quick change hex shank optimizes drill torque* Fits all keyed and keyless chucks* Works in all corded and cordless drills. Insty-Bit® 3/8" Shaft Adapter* 1/4" shank clicks into Quick Change Chuck

    9 Review(s)
    $23.67
  9. Kreg Quick-Change Pocket Hole Bit Adapter

    Kreg Quick-Change Pocket Hole Bit Adapter

    …in quick-change chucks. Additional features:* Durable, one-piece forged steel construction adds durability.* Specifically designed and sized for use with standard round shank 3/8" diameter pocket-hole drill bits.* Two Allen screws securely hold our standard 3/8" step drill bit to eliminate…

    $7.99
  10. 1/2" Tenon-Lok™  Dovetail Drill Bit

    1/2" Tenon-Lok™ Dovetail Drill Bit

    …Dovetail Drill Bit: 1. Drill a standard 1/2" round mortise with a forstner bit or another bit of your choice. 2. Chuck the 1/2" Tenon-Lok™ cutting tool in your drill. 3. Before starting the drill, position the Tenon-Lok™ cutter all the way at the bottom of the mortise. 4. Start drilling

    2 Review(s)
    $25.49
  11. Portable Drill Guide

    Portable Drill Guide

    …to a 3/8" drill chuck, and allows you to drill larger pieces you can't fit on your stationary press. Pre-drilled holes allow you to attach a base or mount it to a table. Technical Details* Turns your portable drill into a portable drill press* Sets up in seconds for hand-held drilling of accurate…

    14 Review(s)
    $52.99
  12. 5-piece Pro Series Professional Tenon Cutter Kit

    5-piece Pro Series Professional Tenon Cutter Kit

    …are machined from aluminum for maximum precision and minimum weight and feature dual blades for quick cuts and minimal heat generation. Note: The 5-piece Pro Series Professional Tenon Cutter Kit requires a drill with a 1/2" chuck and a minimum of 7 amps and a maximum of 700 RPM's (sold separately).

    $799.00
  13. Insty-Drive Drill Bit Adapter Set

    Insty-Drive Drill Bit Adapter Set

    Convert standard round shank drill bits and rotary tools into quick-change tools. * With 1/4" hex power bit shanks.* Works with Rockler/Insty-Drive Quick-Change Chuck (#69015). Includes 1/16", 3/32", 1/8", 5/32", 3/16", 7/32" and 1/4" drill bit adapters, plus 1/8" hex wrench. * 2,500 RPM maximum.*…

    0 Review(s)
    $18.49
  14. Pen Turning Mandrel, #2 Morse Taper

    Pen Turning Mandrel, #2 Morse Taper

    …essential tool for pen turning on a lathe! Machined-accurate steel bar is held in the lathe to ensure the pen turns accurately with live center, no drill chuck required!This Pen Turning Mandrel system includes a #2 morse taper arbor for use with a #2 morse taper lathe, 7 mm mandrel shaft and knurled…

    $17.49
  15. Rockler Insty-Drive 18 Piece Self-Centering & Countersink Set

    Rockler Insty-Drive 18 Piece Self-Centering & Countersink Set

    …self-centering bits; Rockler's Insty-Driver; 10 of the most popular drive bits; and a nylon pouch with belt loop. * Switch from drilling to driving instantly!* Just drill the pilot hole, slip on the Insty-Driver and drive home the screws.* Components are engineered to meet the highest standards for…

    32 Review(s)
    $78.99
  16. Biesemeyer 18-901 Universal Drill Press Fence

    Biesemeyer 18-901 Universal Drill Press Fence

    …favorite on any drill press. The extruded aluminum fence can be oriented vertically to support tall work pieces, or horizontally for easy handling when working with narrow pieces, or when clearance is needed for the chuck. Two cam-action clamps slide along T-tracks in the drill press table-simply…

    $69.99
  17. 1" and 2" Microplane® Rotary Shapers

    1" and 2" Microplane® Rotary Shapers

    …Always wear safety goggles and gloves.* Not for use with routers. Technical Details:* Drill attachments measure 3-1/2" total height with shaft* Cutting blade height: 2-1/8"* Fits 5/16" or larger chuck* Shaft Diameter: 5/16"* Weight: 2 oz.* Materials: Blades made of 400 series stainless steel*…

    7 Review(s)
    From: $17.99
  18. FastFix® FX Depth Stop Chuck

    FastFix® FX Depth Stop Chuck

    Switch between drill and driving functions in seconds with the FastFix interface, saving time and eliminating the cost of dedicated, single purpose tools. The Festool FastFix Depth Stop Chuck is designed for consistent, precise depth setting regardless of material density. Integrated clutch…

    $120.00
  19. Pen Turning Mandrel, #1 Morse Taper

    Pen Turning Mandrel, #1 Morse Taper

    …tool for pen turning on a lathe! Machined-accurate steel bar is held in the lathe to ensure the pen turns accurately with live center, no drill chuck required! This Pen Turning Mandrel system includes a #1 morse taper arbor for use with a #1 morse taper lathe, 7 mm mandrel shaft and knurled…

    $15.99 $9.99

    SAVE 38%

  20. Nova Live Center System With Stepped Cone

    Nova Live Center System With Stepped Cone

    …mounting of work.* Can handle both heavy and delicate work, and hard and soft woods.* Hollow morse taper allows the user to drill through the live center—ideal for drilling cable routes for lamps and more.* Instruction manual included. Mounting Options: * Threaded Center: Features an internal…

    $73.49
  21. 3-Pc. Self-Centering Plug Cutter Set

    3-Pc. Self-Centering Plug Cutter Set

    …5/16", 3/8" and 1/2" cutters. Technical Details:* 1/4" quick shank prevents tool from slipping the drill chuck. * Works with all 3/8" and 1/2" drive drill presses and handheld drills.* Hardened steel for long life.* Set Includes 5/16", 3/8" and 1/2" cutters.* Cutters are also sold individually.

    $29.99
  22. Dewalt DCD920KX 14.4V 1/2'' XRP Drill/Driver

    Dewalt DCD920KX 14.4V 1/2'' XRP Drill/Driver

    …time* Heavy-duty 1/2" ratcheting chuck helps prevent bits from slipping and falling out* LED Worklight provides increased visibility in confined spaces* High power, high efficiency motor delivers 325 unit watts out of max power for superior performance in all drilling and fastening applications*…

    $240.99
  23. Bottle Stopper Mandrel

    Bottle Stopper Mandrel

    …separately, 43541), this Bottle Stopper Mandrel provides an easy way to chuck that small turning blank onto your lathe. Just drill a hole into the bottle stopper blank, screw the threaded end of the mandrel into the blank, then chuck the smooth end of the mandrel onto your lathe. The threads of the…

    $9.59 $4.79

    SAVE 50%

  24. Insty-Bit® Quick Change Extensions

    Insty-Bit® Quick Change Extensions

    …with plated steel chuck give excellent corrosion resistance.* Replaces all magnetic and non-magnetic bit holders.* Quick Change hex-shank and hardened extensions optimize drill torque.* Fits all keyed and keyless chucks.* Works in all corded and cordless drills.* Only chuck that holds all…

    2 Review(s)
    From: $8.99
  • Items 1 - 24 of 102
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X