Drill Jig

  • Items 1 - 24 of 171
  • Page:
    1. 1
    2. 2
    3. 3
  1. Rockler JIG IT® Drill Guide

    Rockler JIG IT® Drill Guide

    The exclusive JIG IT® Drill Guide can be used with a drill press or a hand drill to ensure perfectly aligned holes every time! Use with our Long Shank Forstner Bits (sold separately) to drill flat-bottomed holes.

    17 Review(s)
    $16.39
  2. JIG IT® Shelving Jig w/Self-Centering Bit

    JIG IT® Shelving Jig w/Self-Centering Bit

    …bits! Additional Self-Centering Bit sizes available separately. * Drills holes either 1-7/16" or 2-1/2" from edge. * Insert shelf pin in top or bottom position to extend jig for continuous drilling.* Shelving Jigs measure 20" long* Provides exact set back for shelf pin holes…

    188 Review(s)
    $36.99
  3. Self Centering Doweling Jig or Complete Doweling Kit Sold Separately

    Self Centering Doweling Jig or Complete Doweling Kit Sold Separately

    …Doweling Jig or Complete Doweling Kit with glue and dowel pins. Technical Details: Self Centering Doweling Jig (49221):* Maximum 2" capacity with boring sizes: 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2"* Plated to prevent rust Complete Doweling Kit (10488) Includes:* (1) Self Centering Doweling Jig

    26 Review(s)
    $62.99
  4. Rockler Deluxe Drawer Pull JIG IT®

    Rockler Deluxe Drawer Pull JIG IT®

    Rockler exclusive JIG IT® template makes marking screw holes for knob and pull installation quick, simple and accurate.* Offers spacing for 2-1/2", 3", 3-1/2", 3-3/4", 4" and 96mm.* Includes 24" aluminum T-slot bar, left to right self-adhesive tape measure, stop block for repetitive drawer pull…

    28 Review(s)
    $39.99
  5. Rockler Pro Shelf Drilling Jig

    Rockler Pro Shelf Drilling Jig

    …twin template tracks are joined by rigid rails that lock in place for error-free drilling* Drill two rows with one jig to save time and ensure accuracy* Locking 3-star tracking knobs allow for adjustments and ensure the jig stays firmly in place* Reversible guide rails have a smooth aluminum surface…

    16 Review(s)
    $84.99
  6. Rockler 1/2'' Dowel Drilling Jig, While Supplies Last!

    Rockler 1/2'' Dowel Drilling Jig, While Supplies Last!

    …the face of the joint and line up the jig. Made to last with a 3/16" acrylic faces and hardened steel drill guides. 1/2" guide has holes spaced 1"-on-center. Also Available from Rockler:* Rockler 1/4" Dowel Drilling Jig* Rockler 3/8" Dowel Drilling Jig Technical Details:* Delivers a quick joint…

    $15.49 $7.99

    SAVE 48%

  7. Rockler Drawer Pull JIG IT® Template and Center Punch

    Rockler Drawer Pull JIG IT® Template and Center Punch

    …every time.* The JIG IT® template, along with the Automatic Center Punch, ensures that you can achieve professional results quickly and easily on either assembled or unassembled doors and drawers!* (JIG IT® for Drawer Pulls and Knobs is a marking system, and not intended for drilling.)

    22 Review(s)
    $19.99
  8. Complete Doweling Jig Kit

    Complete Doweling Jig Kit

    …line up the jig.* Made to last with a 3/16" thick acrylic face.* Hardened steel drill guide will endure years of abuse.* Each jig has a convenient hanging hole.* Precise centerline for the joint, plus center lines for two dowels.* 1/4" jig has holes spaced 3/4"-on-center.* 1/4" jig is designed to…

    $71.46
  9. Kreg R3 Pocket Hole System

    Kreg R3 Pocket Hole System

    jig for the Do-It-Yourselfer! Allows you to put pocket holes together more quickly than ever before. Simply drill pocket holes and drive self-tapping screws. * Nine position settings let you create strong wood joints in materials from 1/2" to 1-1/2" thick in 1/8" increments.* Hardened steel drill

    32 Review(s)
    $39.95
  10. Rockler Bench Dog® 1/4'' Shelf Pin Jig

    Rockler Bench Dog® 1/4'' Shelf Pin Jig

    …the back of the cabinet or the lip of a face frame. Fence features a non-slip rubber material so the jig stays firmly in place while drilling, and onboard storage for the index pin and drill bit keep everything in one convenient place. The Bench Dog Shelf Pin Jig is ideal for 1/4'' shelf supports.

    $19.99
  11. Dow'l Simp'l Kit

    Dow'l Simp'l Kit

    …between the top and bottom surfaces to achieve balanced doweling. * Kit includes aluminum clamp-on jig with steel inserts, three carbon steel brad point drill bits in 1/4", 5/16" and 3/8" sizes, three drill stops and wrench, three steel drill bushings, six dowel center points, and wood dowels.

    1 Review(s)
    $48.29
  12. Rockler Router Fluting Jig

    Rockler Router Fluting Jig

    …them can be a true test of patience. Fortunately, this innovative jig makes it fast and easy to rout perfect flutes with even spacing — every time. Two low-friction, underside rails straddle your work piece, allowing the jig to slide smoothly along boards up to 8" wide. The router mounts to…

    32 Review(s)
    $69.99
  13. Rockler Pen Press/Drilling Jig

    Rockler Pen Press/Drilling Jig

    Drill and assemble your pens perfectly with flush fittings and a smoothly-operating mechanism! This dual-purpose jig takes care of both prep work and assembly. It holds your blank firmly in position for drilling, creating a precise, perfectly centered hole the entire length of the pen. Later, it…

    32 Review(s)
    $99.99
  14. Tormek DBS-22 Drill Bit Sharpening Attachment

    Tormek DBS-22 Drill Bit Sharpening Attachment

    …the motion of the drill bit. Couple that with low RPMs and water-cooling to prevent overheating and microcracks, and the difference is clear. The sharpening specialists at Tormek know how to keep a cutting edge. Accepts drill bits from 1/8" to 7/8". Technical Details:* Accepts Drill bits from 1/8"…

    1 Review(s)
    $280.00
  15. All-In-One Clamp Guide Package w/Free Squaring Attachment

    All-In-One Clamp Guide Package w/Free Squaring Attachment

    …for bearing-guided routing applications.* Built-in T-track on top of the guide allows you to use any of our versatile accessories or shop-made jigs.* Create your own shooting board for routing or cutting with the circular saw.* This is a "C Series" or Contractor series clamp with a lower profile.…

    2 Review(s)
    $179.99 $89.99

    SAVE 50%

  16. Kreg Deck Jig System

    Kreg Deck Jig System

    …fencing and more! This jig guides you as you drill and drive deck screws at the optimal angle to achieve concealed fastening of deck boards. No more exposed nails or screws! An easy grip handle and 90° alignment tab make setup extremely easy. The onboard drilling jig is preset at the optimal…

    6 Review(s)
    $79.00
  17. Self Centering Doweling Jig for Thick Timbers

    Self Centering Doweling Jig for Thick Timbers

    Great for large jobs such as swing sets and outdoor structures! Opens to a full 6" . Precisely aligned guides for five permanent holes including 1/4" , 5/16" , 3/8" , 7/16" , and 1/2".

    14 Review(s)
    $83.99
  18. Kreg Jig K4MS Master System

    Kreg Jig K4MS Master System

    …in chip expulsion for faster, cleaner drilling. Adjustable for 1/2" to 1-1/2" thick stock in 1/8" incremental settings. * 3 tools in 1 - benchtop jig, portable contractor jig, repair jig with addition of spacer blocks to the bottom of drill guide* 3-hole drill guide w/hardened steel core-adjustable…

    23 Review(s)
    $139.00
  19. Rockler Incra Universal Precision Positioning Jig

    Rockler Incra Universal Precision Positioning Jig

    …repeatability on virtually any power tool in your shop, including router table, table saw, drill press and band saw.* Includes box joint template and dovetail & corner post template. Simply set the jig to the color-coded reference marks and make your cuts. No math, no measurements, and no…

    2 Review(s)
    $69.99
  20. Rockler Concealed Hinge JIG IT® System

    Rockler Concealed Hinge JIG IT® System

    Drill concealed hinge cup holes with ease and accuracy using the Concealed Hinge JIG IT® System! Use it to easily locate center, and drill cup holes on cabinet doors for fully concealed hinges. Use our Mounting Plate JIG IT® templates (sold separately) to accurately align holes for hinge…

    26 Review(s)
    $41.99
  21. Self-Centering Bits

    Self-Centering Bits

    …Templates for Shelf Pins or Cribbage Templates for perfect results every time. Shelf Jig & 1/4" bit set for 1/4" shelf pins Shelf Jig & 5mm bit set for 5mm shelf pins Shelf Jig & 7/32" bit for 5mm shelf pin sockets Shelf Jig & 9/32" bit for 1/4" shelf pin sockets 9/32" for Peg Games

    18 Review(s)
    $16.49
  22. Rockler Long Stop for Rockler T-Track System

    Rockler Long Stop for Rockler T-Track System

    …are also ideally suited for pocket hole face frame assembly. Use two Long Stops to create a square corner to support your face frame parts while drilling. The increased length of the Long Stop spans the joint line, allowing you to easily flush up rails and stiles by butting them against the stop.…

    $12.99
  23. Rockler 3/8'' Dowel Drilling Jig Kit

    Rockler 3/8'' Dowel Drilling Jig Kit

    …joint. The see-through reference lines allows you to line up the jig perfectly. Clamp it in place, drill and you're done! Also Available from Rockler:* Rockler 1/4" Dowel Drilling Jig* Rockler 1/2" Dowel Drilling Jig* Hardened steel drill guide will endure years of abuse.* Holes are spaced 3/4" on…

    46 Review(s)
    $19.99 $14.99

    SAVE 25%

  24. 1/4" Pro Shelf Drilling Bit

    1/4" Pro Shelf Drilling Bit

    Save time and eliminate the possibility of misaligned shelves. Paired with the easy-to-use Pro Shelf Drilling Jig, the 1/4'' Pro Shelf Drilling Bit provides uniform pin holes.

    1 Review(s)
    $16.49
  • Items 1 - 24 of 171
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X