Drop Pulls

  • Items 1 - 24 of 95
  • Page:
    1. 1
    2. 2
    3. 3
  1. Top Knobs Drop Handle, M678

    Top Knobs Drop Handle, M678

    * Every piece is hand-finished, hand-polished, and then prior to packaging, every piece is hand-inspected for quality. * Top Knobs products are not just metal, they are a higher grade metal as well - high-grade brass, cast bronze, steel, and zinc alloy for long life, minimal wear, and best finishes.…

    $19.99
  2. Bosetti Marella Artistic Drop Pull, 101420.22

    Bosetti Marella Artistic Drop Pull, 101420.22

    * Finish: Oil Rubbed bronze* Base Material: Zinc* Width: 13/16 Inch* Length: 2-15/16 Inches* Projection: 11/16 Inch* Machine Screw Thread Size: M4* Screw Length: 25MM* Pilot Hole Size: 3/16 Inch* Screws are included

    $5.19
  3. Top Knobs Drop Handle, M687

    Top Knobs Drop Handle, M687

    * Every piece is hand-finished, hand-polished, and then prior to packaging, every piece is hand-inspected for quality. * Top Knobs products are not just metal, they are a higher grade metal as well - high-grade brass, cast bronze, steel, and zinc alloy for long life, minimal wear, and best finishes.…

    $9.99
  4. Top Knobs Drop Handle, M786

    Top Knobs Drop Handle, M786

    * Every piece is hand-finished, hand-polished, and then prior to packaging, every piece is hand-inspected for quality. * Top Knobs products are not just metal, they are a higher grade metal as well - high-grade brass, cast bronze, steel, and zinc alloy for long life, minimal wear, and best finishes.…

    $14.99
  5. Top Knobs Twist Drop Handle, M642

    Top Knobs Twist Drop Handle, M642

    * Every piece is hand-finished, hand-polished, and then prior to packaging, every piece is hand-inspected for quality. * Top Knobs products are not just metal, they are a higher grade metal as well - high-grade brass, cast bronze, steel, and zinc alloy for long life, minimal wear, and best finishes.…

    $9.99
  6. Bosetti Marella 1800 Circa Drop Pull, 101494.03

    Bosetti Marella 1800 Circa Drop Pull, 101494.03

    * Finish: Antique Brass Distressed* Base Material: Brass* Length: 15/16 Inch* Width: 5-5/8 Inches* Projection: 3/4 Inch* Machine Screw Thread Size: M4* Screw Length: 25MM* Pilot Hole Size: 3/16 Inch* Screws are included

    $18.99
  7. Top Knobs Thames Drop Handle, M502

    Top Knobs Thames Drop Handle, M502

    * Every piece is hand-finished, hand-polished, and then prior to packaging, every piece is hand-inspected for quality. * Top Knobs products are not just metal, they are a higher grade metal as well - high-grade brass, cast bronze, steel, and zinc alloy for long life, minimal wear, and best finishes.…

    $13.49
  8. Bosetti Marella 1700 Circa Provenzale Drop Pull, 101488.03

    Bosetti Marella 1700 Circa Provenzale Drop Pull, 101488.03

    * Finish: Antique Brass Distressed* Base Material: Brass* Length: 4-9/16 Inches* Width: 1-3/16 inches* Projection: 10/16 Inch* Center to Center Hole Spacing: 96mn* Machine Screw Thread Size: M4* Screw Length: 25MM* Pilot Hole Size: 3/16 Inch* Screws are included

    $13.79
  9. Bosetti Marella Louis XVI Drop Pull, 100905.09

    Bosetti Marella Louis XVI Drop Pull, 100905.09

    * Finish: Antique Brass Dark* Base Material: Brass* Length: 1-7/32 Inches* Width: 2-4/16 Inches* Projection: 3/4 Inch* Base Diameter: 15/16 Inch* Machine Screw Thread Size: M4* Screw Length: 25MM* Pilot Hole Size: 3/16 Inch* Screws are included

    $8.39
  10. Bosetti Marella Louis XVI Drop Pull, 100065.09

    Bosetti Marella Louis XVI Drop Pull, 100065.09

    * Finish: Antique Brass Dark* Base Material: Brass* Length: 3-3/8 Inches* Width: 1-5/16 Inches* Projection: 5/8 Inch* Center to Center Hole Spacing: 64mm* Base Diameter: 15/16 Inch* Machine Screw Thread Size: M4* Screw Length: 25MM* Pilot Hole Size: 3/16 Inch* Screws are included

    $12.69
  11. Dewalt D26670 Heavy-Duty Laminate Trimmer

    Dewalt D26670 Heavy-Duty Laminate Trimmer

    …30,000RPM motor provides the power for materials ranging from laminates to hardwoods* 1/4" collet fits a wide variety of router bits* Spindle lock for fast, one wrench bit change* Cast Aluminum base for durability in a drop* XL depth adjustment knob delivers quick adjustment or removal of the base

    $98.99
  12. Bosetti Marella Oriental Drop Pull, 101504.22

    Bosetti Marella Oriental Drop Pull, 101504.22

    * Finish: Oil Rubbed bronze* Base Material: Zinc* Length: 1-2/16 Inches* Width: 3-3/4 Inches* Projection: 27/32 Inch* Machine Screw Thread Size: M4* Screw Length: 25MM* Pilot Hole Size: 3/16 Inch* Screws are included

    $9.99
  13. Federal Desk Plan and Desk Support & Hinge Set

    Federal Desk Plan and Desk Support & Hinge Set

    …desk uses oval inlays together with tapered legs and slender, light-colored inlay strips. Hardware automatically pulls out lower support. When you close the deck, the hardware pulls the support arm back inside to the stored position. Low profile hinges and pull-out supports maintain a clean, tidy…

    10 Review(s)
    From: $4.19
  14. Top Knobs Drop Handle, M95

    Top Knobs Drop Handle, M95

    * Every piece is hand-finished, hand-polished, and then prior to packaging, every piece is hand-inspected for quality. * Top Knobs products are not just metal, they are a higher grade metal as well - high-grade brass, cast bronze, steel, and zinc alloy for long life, minimal wear, and best finishes.…

    $28.44
  15. Top Knobs Thames Drop Handle, M501

    Top Knobs Thames Drop Handle, M501

    * Every piece is hand-finished, hand-polished, and then prior to packaging, every piece is hand-inspected for quality. * Top Knobs products are not just metal, they are a higher grade metal as well - high-grade brass, cast bronze, steel, and zinc alloy for long life, minimal wear, and best finishes.…

    $29.88
  16. Amerock Allison Value Hardware Bail Pull

    Amerock Allison Value Hardware Bail Pull

    …the hoop like handles of a pail, bail pulls have long graced furniture from the most practical to the most elegant. The dangling handle drops down nearly flush with the cabinet face, making it a particularly good choice when clearance is an issue. This bail pull is nicely proportioned, and plated…

    $6.99
  17. Bosetti Marella Baroque Drop Pull, 100351.22

    Bosetti Marella Baroque Drop Pull, 100351.22

    * Finish: Oil Rubbed Bronze* Base Material: Brass* Length: 2-14/16 Inches * Width: 11/16 Inch* Projection: 28/32 Inch* Base Diameter: 13/16 Inch* Machine Screw Thread Size: M4* Screw Length: 25MM* Pilot Hole Size: 3/16 Inch* Screws are included

    $9.49
  18. Bosetti Marella Louis XVI Drop Pull, 100905.54

    Bosetti Marella Louis XVI Drop Pull, 100905.54

    * Finish: French Antique Gold* Base Material: Brass* Length: 1-7/32 Inches* Width: 2-4/16 Inches* Projection: 3/4 Inch* Base Diameter: 15/16 Inch* Machine Screw Thread Size: M4* Screw Length: 25MM* Pilot Hole Size: 3/16 Inch* Screws are included

    $10.29
  19. Top Knobs Twisted Wire Drop Handle, M743

    Top Knobs Twisted Wire Drop Handle, M743

    * Every piece is hand-finished, hand-polished, and then prior to packaging, every piece is hand-inspected for quality. * Top Knobs products are not just metal, they are a higher grade metal as well - high-grade brass, cast bronze, steel, and zinc alloy for long life, minimal wear, and best finishes.…

    $6.99
  20. Top Knobs Twist Drop Handle, M644

    Top Knobs Twist Drop Handle, M644

    * Every piece is hand-finished, hand-polished, and then prior to packaging, every piece is hand-inspected for quality. * Top Knobs products are not just metal, they are a higher grade metal as well - high-grade brass, cast bronze, steel, and zinc alloy for long life, minimal wear, and best finishes.…

    $9.99
  21. Top Knobs Drop Handle, M682

    Top Knobs Drop Handle, M682

    * Every piece is hand-finished, hand-polished, and then prior to packaging, every piece is hand-inspected for quality. * Top Knobs products are not just metal, they are a higher grade metal as well - high-grade brass, cast bronze, steel, and zinc alloy for long life, minimal wear, and best finishes.…

    $22.99
  22. Top Knobs Twisted Wire Drop Handle, M780

    Top Knobs Twisted Wire Drop Handle, M780

    * Every piece is hand-finished, hand-polished, and then prior to packaging, every piece is hand-inspected for quality. * Top Knobs products are not just metal, they are a higher grade metal as well - high-grade brass, cast bronze, steel, and zinc alloy for long life, minimal wear, and best finishes.…

    $8.99
  23. Bosetti Marella Louis XVI Drop Pull, 100905.22

    Bosetti Marella Louis XVI Drop Pull, 100905.22

    * Finish: Oil Rubbed Bronze* Base Material: Brass* Length: 1-7/32 Inches* Width: 2-4/16 Inches* Projection: 3/4 Inch* Base Diameter: 15/16 Inch* Machine Screw Thread Size: M4* Screw Length: 25MM* Pilot Hole Size: 3/16 Inch* Screws are included

    $9.99
  24. Top Knobs Drop Handle, M688

    Top Knobs Drop Handle, M688

    * Every piece is hand-finished, hand-polished, and then prior to packaging, every piece is hand-inspected for quality. * Top Knobs products are not just metal, they are a higher grade metal as well - high-grade brass, cast bronze, steel, and zinc alloy for long life, minimal wear, and best finishes.…

    $9.99
  • Items 1 - 24 of 95
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X