Drop Hinges

  • Grid List
  • Page:
    1. 1
  • Items 1 - 17 of 17
  • Page:
    1. 1
  1. Drop Leaf Support-Select size

    Drop Leaf Support-Select size

    …Sturdy, rugged and precision crafted for years of trouble-free service. To determine correct support for your table: measure distance "A" (apron to hinge pin center), then determine "B" on the graph by matching "A" with the drop leaf support length. * Brass finish.* Screws included.* Price per pair.

    33 Review(s)
    From: $14.69
  2. Fully Adjustable Concealed Fall Flap Hinges

    Fully Adjustable Concealed Fall Flap Hinges

    Permits drop front to travel 90° to produce a flat surface flush with the cabinet bottom. * Requires 35mm x 12mm deep holes.* Plated steel.

    34 Review(s)
    From: $15.99
  3. Combination Hinge and Drop Front Support-Select finish

    Combination Hinge and Drop Front Support-Select finish

    This proven hardware lowers the drop front to a comfortable writing position, making it an excellent choice for slant or straight front secretaries. Mortising required. 7" long x 3/4" wide. Brass plated steel. Price for pair.

    4 Review(s)
    From: $20.49
  4. Brass-Plated Drop Leaf Hinges for Shaped Edges

    Brass-Plated Drop Leaf Hinges for Shaped Edges

    Need an affordable replacement for your worn-out table hinges? These brass-plated Drop Leaf Hinges for Shaped Edges provide an elegant appearance and smooth up-and-down action for table leaves that incorporate a rule joint. Simply install under your table top for easy drop-down action on your table…

    17 Review(s)
    $11.59
  5. Soft Down Drop Front Support

    Soft Down Drop Front Support

    Soft Down Drop Front Desk Support. Lids lower gently - never crushing fingers. A speed adjustment screw lets you control the rate of descent. Support opens drop front to a maximum angle of 90°. They have nickel plated steel arms with umber colored plastic housing.

    7 Review(s)
    $24.69
  6. Twin Pin Sewing Machine Hinges-Select Option

    Twin Pin Sewing Machine Hinges-Select Option

    …tables and drop front desks. Made of highest quality solid extruded brass. These hinges have twin pin joints with steel pins and recessed knuckles on the top for a perfectly flat surface. Solid extruded brass with a polished finish. Standard Hinges are 1-3/16" x 2-3/4". The Narrow Hinges are 1/2"…

    12 Review(s)
    From: $12.59
  7. Single Pin Hinge-Select Option

    Single Pin Hinge-Select Option

    These simple yet elegant hinges are great for drop front desks as well as sewing machines. Choose from Solid Brass or Antique English finish. Price per pair. Technical Details:* Each measures 1-1/4" wide x 3-1/8" long x 1/16" thick* 180° Opening* Available in Brass or Antique English Finish*…

    9 Review(s)
    From: $7.99
  8. Folding Leaf Hinge

    Folding Leaf Hinge

    Add narrow leaves to your table to create a round or oval top. 5-1/4" x 7-3/4" mechanism doubles as a hinge and support, and locks the leaves in either the closed or open position.* Stiff brass plated steel prevents sagging.* No other supports are required.* For table leaves up to 9" wide.*…

    3 Review(s)
    $17.19
  9. Flush Hinge

    Flush Hinge

    Eliminate the gap created by most hinges on drop leaf tables. Provides a snug fit between table halves and leaves in any position.* Use on 3/4" wood only.* Sold in pairs.

    3 Review(s)
    $10.39
  10. Federal Desk Plan and Desk Support & Hinge Set

    Federal Desk Plan and Desk Support & Hinge Set

    …automatically pulls out lower support. When you close the deck, the hardware pulls the support arm back inside to the stored position. Low profile hinges and pull-out supports maintain a clean, tidy look. The hardware attaches to both sides of your desk. Statuary bronze plated steel, 12" overall.*…

    11 Review(s)
    From: $4.19
  11. Overhead Bin Hinge

    Overhead Bin Hinge

    Drop-down doors stay securely upright until you raise the door slightly to release the lock.* Lifts and locks doors open at 75 degrees.* Surface mounted 1/2" overlay hinge.* Price per pair.

    13 Review(s)
    $8.99
  12. Bosch Colt™ Variable-Speed Palm Router Kit

    Bosch Colt™ Variable-Speed Palm Router Kit

    …router is more than shop-worthy with a 1.0 HP (max.), 5.7 amp motor - the highest rating in its class.* 16,000-35,000 RPM. The Colt is perfect for hinge mortising, edge forming, slot cutting, dovetailing, window cutouts, decorative inlays and more.* Variable speed dial lets you match speed to…

    23 Review(s)
    $129.99
  13. Yellow Zinc-Plated Drop Leaf Hinges for Straight Edges

    Yellow Zinc-Plated Drop Leaf Hinges for Straight Edges

    Need an affordable replacement for your worn-out table hinges? These yellow zinc-plated Drop Leaf Hinges for Straight Edges provide a smooth up-and-down action for table leaves that incorporate a butt joint. Simply install under your table top for easy drop-down action on your table leaves when…

    17 Review(s)
    $11.99
  14. Non-Mortise Hinges-With Finial

    Non-Mortise Hinges-With Finial

    …Finial-Tip Non-Mortise Hinges! Simply mount one side of this fixed-pin hinge to your cabinet edge and the other to the back of the door or lid – no need for mortises! Use them on cabinet doors, interior shutters, drop-leaf desks and many more hinge applications. Steel construction…

    58 Review(s)
    From: $4.99
  15. Adjustable Lid Support

    Adjustable Lid Support

    …horizontal or vertical, for lids or drop fronts. It is reversible to be mounted left or right, and change tension direction from lift-up to drop-down as needed. It's adjustable: Tension adjustment can be made easily using a number 4 Allen wrench for lids or drop fronts up to 20 lbs. The angle…

    5 Review(s)
    $24.99
  16. Rockler 2-Pc. Drop Leaf Table Rule Joint Router Bit Set - 1/2" Shank

    Rockler 2-Pc. Drop Leaf Table Rule Joint Router Bit Set - 1/2" Shank

    The precisely hinged joints on drop-leaf tables have always been a mark of fine craftsmanship. Now, with this dedicated two-piece router bit set, you can get the same precise results whether you're a beginner or a master woodworker. The set bundles a cove bit with a corresponding roundover,…

    1 Review(s)
    $64.99
  17. Non-Mortise Hinges - Flat Tip

    Non-Mortise Hinges - Flat Tip

    …these easy-to-install Non-Mortise Hinges! Simply mount one side of the flat-tip hinge to your cabinet edge and the other to the back of the door or lid – no need to cut mortises! For use on cabinet doors, interior shutters, drop-leaf desks and in many more hinge applications. Durable steel in…

    58 Review(s)
    From: $2.99
  • Grid List
  • Page:
    1. 1
  • Items 1 - 17 of 17
  • Page:
    1. 1
Feedback X