Dry Coat

  • Items 1 - 24 of 78
  • Page:
    1. 1
    2. 2
    3. 3
  1. Rockler Pitch & Resin Remover

    Rockler Pitch & Resin Remover

    …the life of your tools. Available in 16 fl. oz spray bottle or 1 quart size. Technical Details:* Pitch & Resin Remover is easy to use.* Spray and coat thoroughly all surfaces. Let stand 5-8 minutes prior to using a cloth, brush or steel wool to remove residue.* 1 quart concentrate makes 1 gallon of…

    8 Review(s)
    From: $10.99
  2. Loctite® Spray Adhesive

    Loctite® Spray Adhesive

    …application.* Dries clear.* Resistant to water and humidity.* No bleed-through, wrinkling or curling of paper.* For heavy-duty permanent bonding, apply a double coat to both surfaces. Let first coat dry to a tack before applying second coat - usually 2-5 minutes. Wait one minute after final coat and…

    $13.99
  3. Behlen Top Coat Lacquer and Sanding Sealer

    Behlen Top Coat Lacquer and Sanding Sealer

    …Allow 1 hour dry time between coats.* Allow final coat to dry overnight. Sanding Sealer:* Sand wood to 320 grit before application.* Allow 30 minutes to dry before sanding to 360 grit smoothness.* Never apply more than 2 coats of sealer.* Allow 1 to 2 hours dry time for the final coat. Can only be…

    5 Review(s)
    $12.99
  4. Salad Bowl Finish

    Salad Bowl Finish

    …countertops. Easy to apply - just wipe on with a soft clean rag. Achieves the sheen and resistance of a varnish. Dried film is non-toxic for food contact 72 hours after drying. Additional coats can be reapplied at any time if maintenance of item becomes necessary. For actively used butcher blocks…

    29 Review(s)
    From: $12.99
  5. Crystal Coat

    Crystal Coat

    Perfect for turned pens! Get a sophisticated, high-gloss finish that's also water- and wear-resistant. Quick, easy and no-mess! Can be applied to turnings right while they're on the lathe! Easy-to-use 6-ounce bottle. Designed as a final finish coat. Food-safe when dry.

    6 Review(s)
    $12.99
  6. Micro Fiber Reusable Dry Tack Cloth

    Micro Fiber Reusable Dry Tack Cloth

    Special coating picks up sanding residue and loose dust to ensure a quality smooth final finish. Hypo-allergenic 16" x 16" tack cloth wipes lint free and contains no adhesive residue.* Wash and reuse hundreds of times!* Attracts and traps even the smallest particles.

    2 Review(s)
    $7.99
  7. Vermont Natural Coatings Poly Whey-Pint

    Vermont Natural Coatings Poly Whey-Pint

    …environmentally safe. A unique whey formula and low-VOC content mean healthier air quality, so you won't need to move out while the finish dries. Clear coating. Satin or semi-gloss; pints or quarts. Please note that this item can be shipped only by UPS Ground to addresses within the continental…

    9 Review(s)
    $21.99
  8. Vermont Natural Coatings Poly Whey-Quart

    Vermont Natural Coatings Poly Whey-Quart

    …environmentally safe. A unique whey formula and low-VOC content mean healthier air quality, so you won't need to move out while the finish dries. Clear coating. Satin or semi-gloss; pints or quarts. Please note that this item can be shipped only by UPS Ground to addresses within the continental…

    8 Review(s)
    $35.99
  9. Wet/Dry Sandpaper

    Wet/Dry Sandpaper

    Technical Details:* Sheet Dimensions: 9" x 11"* Use 220 for removing raised fibers* 320 for sanding between coats* 400 for sanding prior to final coats for lacquer or varnish* 600 for final finish coats before rubbing out with compounds

    $6.89
  10. Liberon Easy French Polish

    Liberon Easy French Polish

    …time waiting around between coats. Perfect for small projects! No thinning necessary. 250 ml (8 oz.). * Easy brush-on finish.* Allow a dry time of 3 to 4 hours between coats.* Apply as many coats as necessary; 3 to 4 coats are usually enough.* Gently rub down the dried coat with extra-fine abrasive…

    $26.99
  11. Minwax® Fast-Drying Polyurethane

    Minwax® Fast-Drying Polyurethane

    …foam brush.* Let dry 4-6 hours. Then lightly sand entire surface with fine sandpaper (220 grit) to ensure an even finish and proper adhesion. Remove all dust.* Apply second coat. If third coat is desired, repeat step 5 before application. After final coat, allow 24 hours before light use.* 2-3 coats

    5 Review(s)
    $17.49 From: $13.99

    SAVE 20%

  12. Qualalacq Alcohol Resistant Lacquers

    Qualalacq Alcohol Resistant Lacquers

    …To help prevent orange peeling or blushing, use Behlen Lacquer Retarder.* Allow 1 hour dry time after first coat.* Allow 1-2 hours dry time after second coat.* Third coat optional.* Allow 18-24 hours dry time before rubbing. Can only be shipped by UPS Ground to addresses within the continental…

    2 Review(s)
    $17.99
  13. Zinsser Bulls Eye® SealCoat™

    Zinsser Bulls Eye® SealCoat™

    …Water-base acrylic polyurethane * Catalyzed Finishes Super Fast Dry Time * Dust-free in 5 minutes * Dry to touch in 10 minutes * Ready to sand/recoat in 20-40 minutes Other Great Features * Fast drying pre-stain conditioner * Bond coat over stearated finishes * Gives depth and beauty to wood grain *…

    7 Review(s)
    $15.79
  14. Pentacryl Wood Preservative for Green Wood

    Pentacryl Wood Preservative for Green Wood

    …splitting while drying. Quick drying, non-toxic. Can reduce drying time up to 90 percent over wax-coating methods. Contains siliconized polymers. Can be applied by brushing on or soaking item if a small piece. Highly recommended for wood carving. Can be finished with most stains once dry! 1 quart…

    1 Review(s)
    $24.19
  15. General Finishes Pre-Stain Wood Conditioner

    General Finishes Pre-Stain Wood Conditioner

    …to help soft, porous woods such as aspen, pine and cherry accept a stain more evenly. Pre-sealing the wood will lighten the color of your stain, so test the pre-stain and the color before starting. A second coat of stain may be applied after the first coat has dried to achieve a darker color.

    2 Review(s)
    From: $9.99
  16. Burn-In Balm&#8482

    Burn-In Balm™

    …Balm to the area surrounding the damaged surface, being careful not to get any Burn-In Balm into the repair.* Proceed with leveling and smoothing of burn-in repair.* Be sure surface is clean and dry before coating. Can only be shipped by UPS Ground to addresses within the continental United States.

    $16.99
  17. General Finishes EF High Performance Polyurethane Top Coat-Gloss

    General Finishes EF High Performance Polyurethane Top Coat-Gloss

    …polyurethane durability, it's a great choice for hardwood floors. Details:* Dry Time: normally 2-4 hours under ideal conditions (70°, 70% humidity). Cooler temperatures and higher humidity will prolong drying time up to 8-10 hours.* Clean up with warm, soapy water* Coverage: 75 sq. ft./pint;…

    19 Review(s)
    From: $16.99
  18. General Finishes EF High Performance Polyurethane Top Coat-Semi-Gloss

    General Finishes EF High Performance Polyurethane Top Coat-Semi-Gloss

    …polyurethane durability, it's a great choice for hardwood floors. Details:* Dry Time: normally 2-4 hours under ideal conditions (70°, 70% humidity). Cooler temperatures and higher humidity will prolong drying time up to 8-10 hours.* Clean up with warm, soapy water* Coverage: 75 sq. ft./pint;…

    19 Review(s)
    From: $16.99
  19. General Finishes EF High Performance Polyurethane Top Coat-Satin

    General Finishes EF High Performance Polyurethane Top Coat-Satin

    …polyurethane durability, it's a great choice for hardwood floors. Details:* Dry Time: normally 2-4 hours under ideal conditions (70°, 70% humidity). Cooler temperatures and higher humidity will prolong drying time up to 8-10 hours.* Clean up with warm, soapy water* Coverage: 75 sq. ft./pint;…

    19 Review(s)
    From: $16.99
  20. Master Dye Toners

    Master Dye Toners

    …uniform wood stain clarity. 13 fl. oz. * May be topcoated with nitrocellulose lacquer.* Spray thin coats until desired opacity is achieved.* Allow final coat at least 2 hours dry time before application of top coat. Can only be shipped by UPS Ground to addresses within the continental United States.

    $14.99
  21. Violin Varnish

    Violin Varnish

    …is far superior to imported spirit varnishes. * Pint.* May be sprayed brushed or padded.* Use thin multiple coats.* Dries dust free in 10-15 minutes.* Allow 1-2 hours between coats.* Allow 24 hours prior to rubbing out the finish.* Use Behkol solvent (57950) for thinning and cleanup. Only shipped…

    $31.99
  22. Deft® Clear Wood Finish, Aerosol

    Deft® Clear Wood Finish, Aerosol

    …items. 11.25 oz. spray can. Semi-Gloss. Dries crystal clear and 5 times faster than oil-based polyurethane and varnish. Finish in your project in just one day!* Not recommended for wood floors or exterior use.* Requires only 30 minutes dry-time between coats.* Dries to touch in 30 minutes and may be…

    $10.99
  23. Minwax® Paste Finishing Wax

    Minwax® Paste Finishing Wax

    …cabinets, doors, paneling and accessories that do not need a hard, protective coat of polyurethane. * Apply with cloth.* Dries in 10-15 minutes (prior to buffing).* Cleans up with mineral spirits.* Recommended one coat over a previous finish; two over raw wood.* 1 lb. per container. Please note that…

    7 Review(s)
    $15.79
  24. Behlen Stringed Instrument Lacquer

    Behlen Stringed Instrument Lacquer

    …finish.* Resists cold checking.* For best results, use Vinyl Sealer (48345, sold separately) as a base coat.* Dry time before handling and recoating: 1-2 hours (at 72°F and 35% relative humidity).* Dry time before rubbing out: 1-4 weeks (at 72°F and 35% relative humidity).* Coverage: 7 to 10…

    $13.99
  • Items 1 - 24 of 78
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X