Dust Tube

  • Items 1 - 24 of 25
  • Page:
    1. 1
    2. 2
  1. Bosch Multi-X Dust Extraction Kit

    Bosch Multi-X Dust Extraction Kit

    The Bosch Multi-X Dust Extraction Kit is an accessory dust collection attachment for the Bosch line of MX30E Oscillating Multi-Tools (e.g. 45718, sold separately). The Dust Kit includes a tube, vacuum hose adaptor and a set of seals for clean dust-free grinding, sanding, shaping, scraping and…

    $51.49
  2. SawStop Contractor Table Saw Dust Collection Panel

    SawStop Contractor Table Saw Dust Collection Panel

    …of SawStop products are either registered trademarks or trademarks of SawStop, LLC and are used with permission. Technical Details:* 2.5" and 4" ports are compatible with most dust collection systems.* User-friendly clamps make it easy to redirect the internal tube.* Easy to install.* Built to last.

    $49.00 $36.75

    SAVE 25%

  3. EXAKTOR Overarm Dusthood

    EXAKTOR Overarm Dusthood

    …Quality materials and precision machining: Parts for the Exaktor dust hood are precision formed by computer-controlled machines to exact tolerances. The telescopic boom is aluminum tubing. The Mast is manufactured from steel tubing. The suspension and guard basket frame are steel. They are coated…

    5 Review(s)
    $480.00 $360.00

    SAVE 25%

  4. Festool CT Midi Dust Extractor

    Festool CT Midi Dust Extractor

    …Cleaning Set includes: plastic extension tube, 4-part interchangeable floor nozzle, upholstery nozzle, curved plastic hand tube and crevice nozzle, all in a Systainer 1 storage case. Industrial Cleaning Set includes: non-antistatic suction hose, extension tube, workshop floor nozzle, square nozzle,…

    2 Review(s)
    $485.00
  5. Dust Right® Separator Hose Holder

    Dust Right® Separator Hose Holder

    …Metal bracket fastens easily with screws to the lip at the bottom of the Dust Right Separator.* Venting on bracket prevents strain on the vacuum motor in the event that it's turned on while the hose is in storage* Includes caster, metal bracket, retaining rod, tube cap and installation hardware.

    $24.99 $18.74

    SAVE 25%

  6. Dust Kit for Panel Pro 2 Panel Saw

    Dust Kit for Panel Pro 2 Panel Saw

    Eliminate most airborne dust particles when using the Safety Speed Cut Panel Pro 2 Panel Saw with this Dust Collection Kit! Includes a 10' hose, rollers, dust tube, and a steel elbow that give you a customized fit for optimum dust collection. Technical Details: * Captures dust and debris while using…

    $99.99
  7. Powermatic 511 Panel Saw with 4'' Dust Port

    Powermatic 511 Panel Saw with 4'' Dust Port

    Powermatic 511 Panel Saw with 4' Dust Port* Stainless steel guide tubes with eight guide roller assemblies provide smooth carriage glide* Dual 4" dust ports with nylon brush surrounding blade for front and rear dust exhaust* True counterweight system keeps the carriage where you position it while…

    $5,354.99
  8. Handle for Festool CT 26 E and CT 36 E Dust Extractors

    Handle for Festool CT 26 E and CT 36 E Dust Extractors

    Easily attaches to rear of CT 26 and CT 36 dust extractors for rolling them around the shop and transporting them to the jobsite. Especially well-suited when using the CT to transport systainers latched to the integrated SysDock. Includes integrated nozzle, tube storage and all hardware necessary to…

    $88.00
  9. Festool Compact Cleaning Set with New T-Loc Systainer

    Festool Compact Cleaning Set with New T-Loc Systainer

    …Set features rigid, lightweight, crack-resistant polypropylene tubes and nozzles that won't ding or mar floors, walls, or furniture. Set Includes:* Systainer 1* 36mm Polypropylene Curved Hand Tube* 36mm Polypropylene Extension Tube (3 pcs)* 36mm Polypropylene Interchangeable Floor Nozzle * 36mm…

    $88.00
  10. Festool Tradesmen/Installer Cleaning Set with T-Loc Systainer

    Festool Tradesmen/Installer Cleaning Set with T-Loc Systainer

    …Extension Tubes (3 pcs)* 36mm Polypropylene Multi-Purpose Floor Nozzle* 36mm Polypropylene Crevice Nozzle* 36mm Polypropylene Upholstery Nozzle* 36mm Polypropylene Suction Brush Technical Details* All attachments are 36mm diameter* Antistatic hose is 11-1/2 feet long* Extension tube and hand tubes

    $240.00
  11. Festool M0114 CT Boom Arm Set

    Festool M0114 CT Boom Arm Set

    …Details:* Compatible with CT 26 and CT 36 dust extractors only.* This package saves you money versus purchasing the items separately.* Stabilizer bars straddle the base of the CT Dust Extractor for secure and stable use.* Constructed of durable steel tubing for a long service life.* Includes a 5 ft…

    $365.00
  12. Industrial Cleaning Set

    Industrial Cleaning Set

    Get the most out of your CT Dust Extractor investment by pairing it with a Festool cleaning set. The Industrial Cleaning Set is an ideal solution for commercial settings with larger debris and heavier cleanup needs. Keep this set within easy access for quick and easy cleanup, helping you to leave a…

    $125.00
  13. Top Mount Accessory Storage for Festool CT 26 E and CT 36

    Top Mount Accessory Storage for Festool CT 26 E and CT 36

    Out of the way storage for critical wands and nozzles. Top mount storage attaches inside of hose garage and holds up to four tubes, three straight and one angled. Rear mount storage holds up to four various nozzles and brushes. Compatible with Festool CT 26/36 Dust Extractor models.

    $26.00
  14. Safety Speed Cut Panel Pro 2 Panel Saw

    Safety Speed Cut Panel Pro 2 Panel Saw

    …Quick Stop Angle with Stop (42875): used with upper extensions for easily repeatable cutting* Lower Extensions (42872): add 20" to each side of the material handling fence for cutting even larger panels* Dust Collection Kit (42871): includes a 10' hose, rollers, dust tube, and a steel elbow

    From: $898.99
  15. SawStop Contractor Table Saw Job Site Cart

    SawStop Contractor Table Saw Job Site Cart

    …ball bearing wheels make it easy to roll your saw up and down ramps to get into houses and trucks. The stand is constructed of squared steel tubing to withstand the rigors of daily use. Compatible with the 36" and 52" tables. Not compatible with the 30" table. NOTE: No International…

    $199.00
  16. Fein Turbo II Wet/Dry Accessory Kit, DW-1

    Fein Turbo II Wet/Dry Accessory Kit, DW-1

    An ideal accessory to the Fein Turbo II Autostart VS Vacuum (26456, sold separately), the Wet/Dry Accessory Kit Includes:* Two extension tubes* Air-reduction handle* Crevice tool* Round brush attachment* Upholstery nozzle* Floor brush with wheels* Liquid pickup nozzle* Anti-foam filter for liquid…

    $131.29 $98.47

    SAVE 25%

  17. Supermax 37'' Dual Drum 3 Phase Sander - 737103

    Supermax 37'' Dual Drum 3 Phase Sander - 737103

    …of any drum sander! And the self-cooling drum prevents overheating and extends abrasive life. Requires dust collection of at least 1,200 CFM. Includes cast stand, zinc-plated steel bed, centerless ground column tubes and set of four casters. Shipped mostly assembled (some minimal assembly required).

    $6,049.99
  18. Supermax 37'' Dual Drum 3 Phase Sander - 737003

    Supermax 37'' Dual Drum 3 Phase Sander - 737003

    …of any drum sander! And the self-cooling drum prevents overheating and extends abrasive life. Requires dust collection of at least 1,200 CFM. Includes cast stand, zinc-plated steel bed, centerless ground column tubes and set of four casters. Shipped mostly assembled (some minimal assembly required).

    $6,049.99
  19. Delta UNISAW Tablesaw, 5 HP, with 52" BIESEMEYER Fence System, Model 36-L552

    Delta UNISAW Tablesaw, 5 HP, with 52" BIESEMEYER Fence System, Model 36-L552

    …a knee or a foot is necessary * Bi-Level Dust Extraction uses only 1 collector hose coupled with a sloping bottom cabinet used to navigate dust, and the new closed bevel gauge provides a sealed interior. This combination results in much higher level of dust collection * Tool-Free Split Guard design…

    From: $3,399.99
  20. Delta UNISAW Tablesaw, 3 HP, with 52" BIESEMEYER Fence System, Model 36-L352

    Delta UNISAW Tablesaw, 3 HP, with 52" BIESEMEYER Fence System, Model 36-L352

    …a knee or a foot is necessary * Bi-Level Dust Extraction uses only 1 collector hose coupled with a sloping bottom cabinet used to navigate dust, and the new closed bevel gauge provides a sealed interior. This combination results in much higher level of dust collection * Tool-Free Split Guard design…

    From: $3,299.99
  21. Delta UNISAW Tablesaw, 3 HP, with 36" BIESEMEYER Fence System, Model 36-L336

    Delta UNISAW Tablesaw, 3 HP, with 36" BIESEMEYER Fence System, Model 36-L336

    …a knee or a foot is necessary * Bi-Level Dust Extraction uses only 1 collector hose coupled with a sloping bottom cabinet used to navigate dust, and the new closed bevel gauge provides a sealed interior. This combination results in much higher level of dust collection * Tool-Free Split Guard design…

    From: $3,199.99
  22. Supermax 25'' Dual Drum 1 Phase Sander - 713003

    Supermax 25'' Dual Drum 1 Phase Sander - 713003

    …abrasive access of any drum sander! And the self-cooling drum prevents overheating and extends abrasive life. Requires dust collection of at least 600 CFM. Includes cast stand, zinc-plated steel bed and centerless ground column tubes. Shipped mostly assembled (some minimal assembly required).

    $4,324.99
  23. Supermax 25'' Dual Drum 3 Phase Sander - 713103

    Supermax 25'' Dual Drum 3 Phase Sander - 713103

    …abrasive access of any drum sander! And the self-cooling drum prevents overheating and extends abrasive life. Requires dust collection of at least 600 CFM. Features cast stand, zinc-plated steel bed and centerless ground column tubes. Shipped mostly assembled (some minimal assembly required).

    $4,324.99
  24. Safety Speed Cut C4 Vertical Panel Saw w/Accessory Package

    Safety Speed Cut C4 Vertical Panel Saw w/Accessory Package

    …rulers and a spring-loaded saw counter-balance system. Accessories Included with Vertical Panel Saw:* Wheels* Fixed Stand* 8" x 60T ATB Saw Blade* Dust Collection Shroud, Fittings, and Hose* Quick Stop™ Gauge, 8 Ft. Save $444.00 by purchasing the panel saw with accessory package versus…

    From: $2,108.00
  • Items 1 - 24 of 25
  • Page:
    1. 1
    2. 2
Feedback X