Dust Collection Fittings

  • Items 1 - 24 of 164
  • Page:
    1. 1
    2. 2
    3. 3
  1. Hose Reducers

    Hose Reducers

    Attach two hoses of different diameters together. Step down in size increases air velocity near the machine where its needed most. Made of durable 1/8" thick polymer. See more images to see each reducer individually.

    6 Review(s)
    $6.99 $5.24

    SAVE 25%

  2. Hose Reducers

    Hose Reducers

    Attach two hoses of different diameters together. A step down in size by a reducer increases air velocity near the machine where it's needed most. * Available in two sizes.* Shop Vac Adapter (sold separately) works with 2-1/2" Hose. 34654 Shop Vac Adapter Small end has a 2-1/4" outer diameter and a…

    25 Review(s)
    $6.99 From: $5.24

    SAVE 25%

  3. Spiral Pipe and Fittings for Dust Collection System

    Spiral Pipe and Fittings for Dust Collection System

    …efficiency, and strength are coiled together in these superior dust collection pipes and fittings. All steel construction offers superior rigidity, minimizes static discharge, and adds strength. Pipe is made of 24 gauge steel. Fittings are constructed of 20 gauge steel. Note: Charges mentioned above…

    1 Review(s)
    From: $4.99
  4. Rockler Dust Right® Multi-Port Quick Release Starter Kit

    Rockler Dust Right® Multi-Port Quick Release Starter Kit

    …with a 2-1/2" or 4" dust port, while the other fits perfectly into the Dust Right® Handle, especially when used with the included Keyed 4" Bridge Hose Clamps. Allows you to connect your dust collection system to any shop tool with a dust port! Starter Kit includes: * Two 4" Dust Right® Tool…

    4 Review(s)
    $39.99 $29.99

    SAVE 25%

  5. Elbow Connector Dust Collection Fittings

    Elbow Connector Dust Collection Fittings

    Elbows are necessary whenever ductwork changes direction, such as, from the dust collector to an overhead mainline and when connecting individual machines to branch lines.* Available for both 2-1/2" and 4" hose.

    11 Review(s)
    $4.99 From: $3.74

    SAVE 25%

  6. Y-Connector Dust Collection Fitting

    Y-Connector Dust Collection Fitting

    Design a main-line and branch-line system to service each machine in your shop.* Available for both 2-1/2" and 4" hose.

    9 Review(s)
    $4.99 From: $3.74

    SAVE 25%

  7. Rockler Dust Right® 4'' Quick Release Starter Kit

    Rockler Dust Right® 4'' Quick Release Starter Kit

    Dust Right® 4" Quick Release Starter KitMove dust collection from one tool to the next like never before! One end of the 4" Dust Right® Tool Port connects tightly to any tool with a 4" dust port, while the other end fits perfectly into the Dust Right® Handle (which connects to 4" hose…

    11 Review(s)
    $21.99 $16.49

    SAVE 25%

  8. Dust Right® Expandable Hose

    Dust Right® Expandable Hose

    …Attach it to your Dust Right® system and dust collector for a premium shop-cleaning setup that won't eat up floor-space! 4" in diameter. Suggested Accessories for Enhanced Dust Collection and Organization: * The unique Dust Right® Storage Rack helps compress our Dust Right® Expandable…

    93 Review(s)
    $41.99 From: $31.49

    SAVE 25%

  9. Rockler 4'' Fitting for PVC Sewer Pipe

    Rockler 4'' Fitting for PVC Sewer Pipe

    Connects Schedule 20 PVC to standard 4" dust collection fittings, such as elbow connectors. Requires silicone adhesive to seal (not included). Schedule 20 (PVC sewer pipe) is thin walled PVC pipe commonly found at home centers. Note regarding Schedule 20 PVC: The term "Schedule 20" merely refers to…

    6 Review(s)
    $7.99 $5.99

    SAVE 25%

  10. Rockler 4'' StableGate™ Blast Gate

    Rockler 4'' StableGate™ Blast Gate

    Unsecured blast gates can be sloppy and tedious to operate. Opening the gate often pulls the hose away from the wall. With its built-in mounting element, the StableGate™ takes care of everything. Just anchor it directly to the wall for clean and stable operation. Made from durable ABS plastic.…

    9 Review(s)
    $6.99 $5.24

    SAVE 25%

  11. Dust Coupling

    Dust Coupling

    Allows you to connect two 4" or 2-1/2" fittings together without the need for additional hose or hose clamps. Example: connect an elbow fitting to a Y-fitting.* 4" Coupling has 4" ID on each to accept 4" OD fittings.* Plastic.* 2-1/2" Coupling has 2-1/2" ID on each to accept 2-1/2" OD fittings.

    $1.99 From: $1.49

    SAVE 25%

  12. Hose Adaptor

    Hose Adaptor

    Lets you easily and securely hook up a 4" hose directly to tools with a standard 2-1/4" port. Works with most benchtop tools. Technical Details:* Small end is 2-1/4" OD, 2" ID.* Large end is 3-7/8"OD, 3-11/16" ID.* Overall length is 3-1/4" (Large end is 1-5/8" long, small end is 1-1/2" Long, 1/8"…

    4 Review(s)
    $5.99 $4.49

    SAVE 25%

  13. Rockler Dust Right® Quick Connect 4'' Elbow

    Rockler Dust Right® Quick Connect 4'' Elbow

    Get dust around corners without compromising power or efficiency. The rubber boot provides a tight seal around your dust collection system input as well as to any 4" hose, giving you a leak-free portal toward a cleaner shop.* Includes two metal hose clamps* Gets dust around corners without…

    6 Review(s)
    $12.99 $9.74

    SAVE 25%

  14. 4'' to 2-1/2''  ''Y'' Dust Fitting

    4'' to 2-1/2'' ''Y'' Dust Fitting

    Expand your dust collection system with a handy 4" to 2-1/2" "Y" fitting. Reduces the branch to 2-1/2" for connecting a table saw, jointer, router, etc.

    $8.99 $6.74

    SAVE 25%

  15. Rockler Dust Right® Router Table Dual Port

    Rockler Dust Right® Router Table Dual Port

    …fence and cabinet dust collection for single-source extraction. Plus, with two slightly different sized fittings on the port's open end, it accepts either 4" dust hose or our Dust Right® Handle. For open stands, combine the Dual Port with the Dust Bucket. * One fitting to replace multiple…

    12 Review(s)
    $15.99 $11.99

    SAVE 25%

  16. Table Saw and Jointer Hoods-Table Saw Hoods

    Table Saw and Jointer Hoods-Table Saw Hoods

    …Allows you to add dust collection capabilities to your Table Saw or Jointer* Table Saw Hoods come in two sizes, 12-1/4" x 12-1/4" x 2-1/2" high or 14" x 14" x 2-1/2" high* Jointer Saw Hood is available in an 8" x 8" square and fits most 6" and 8" Jointers* Dust collection port fits 4" diameter hose.

    10 Review(s)
    $7.99 From: $5.99

    SAVE 25%

  17. Rockler FlexForm™ Dust Collection Hose - 4'' Diameter

    Rockler FlexForm™ Dust Collection Hose - 4'' Diameter

    …to dust collection! A unique, segmented design allows FlexForm Hose to twist, bend, expand and/or collapse to a desired shape and length, then firmly hold that position - resulting in virtually unlimited versatility. This ability to bend around obstacles, expand or contract to perfectly fit a given…

    15 Review(s)
    $19.99 $14.99

    SAVE 25%

  18. Rockler Clear Dust Collection Pipe

    Rockler Clear Dust Collection Pipe

    …lengths to help get your dust collection from point A to point B. Shown here using 2-1/2" plastic hangers for mounting. Use 2-1/2" dust hose or #36973 coupler to join lengths of pipe, or to connect pipe to other 2-1/2" fittings. Caution: Be sure to ground your dust collection system, especially when…

    1 Review(s)
    $7.99 $5.99

    SAVE 25%

  19. Tabletop Dust Fitting

    Tabletop Dust Fitting

    Large 12-1/2" x 16-1/2" hood opening makes this ideal for collecting dust from miter saws, lathes, radial arm saws, carving, sanding, and planers without hoods.* Lightweight and portable; easy to position anywhere.* With 3-7/8" OD port connection.* Hood depth is 10-1/2".* Plastic.

    2 Review(s)
    $25.99 $19.49

    SAVE 25%

  20. Universal Dust Port

    Universal Dust Port

    This universal dust port easily attaches to shop machines such as router tables for connecting them to dust collection systems. 2-1/2" O.D. tapers to 2-5/16" I.D. and the 2-1/2" hose fits over this end. Flange end is 4" x 3-5/8" with four 3/16" mounting holes. Made of tough 3/32" ABS plastic.

    3 Review(s)
    $7.99 $5.99

    SAVE 25%

  21. Universal Dust Collection Port

    Universal Dust Collection Port

    …for collecting dust from scroll saws, lathes, disc sanders and other woodworking machines. Bring your dust hose to where you need it! Mount this heavy-duty dust collection port almost anywhere — attach it to a floor base, clamp it to a table or mount it to a wall or ceiling.* Dust collection

    2 Review(s)
    $69.99 $52.49

    SAVE 25%

  22. Rockler Dust Right® 2.5'' Tool Port

    Rockler Dust Right® 2.5'' Tool Port

    Move suction from tool to tool like never before!* One end fits snug on any tool with a 2-1/2" dust port; the other connects tool-free to the Dust Right® Handle (which attaches to 4" hose and, ultimately, your dust collector).* Packs of two.* Clamps included.* The Ports feature a flexible rubber…

    17 Review(s)
    $14.99 $11.24

    SAVE 25%

  23. Rockler Dust Right® 4'' Dust Separator Components, with FREE Downloadable Plan!

    Rockler Dust Right® 4'' Dust Separator Components, with FREE Downloadable Plan!

    …save wear and tear on your dust collector, and you won't have to empty it as often. The two coupler components fit standard 4" dust hose as well as the Dust Right® Handle system (22643, sold separately). Go to the "Tech Spec" tab for a FREE downloadable plan for a Dust Separator Cabinet, plus…

    18 Review(s)
    $20.99 $15.74

    SAVE 25%

  24. 2-1/2'' Dia. Splicer for Dust Hose

    2-1/2'' Dia. Splicer for Dust Hose

    2-1/2" Splicer units are used to connect full sections of hose for longer runs or to utilize short sections.

    1 Review(s)
    $3.99 $2.99

    SAVE 25%

  • Items 1 - 24 of 164
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X