Dust Separator

  • Items 1 - 24 of 164
  • Page:
    1. 1
    2. 2
    3. 3
  1. Dust Right® Dust Separator

    Dust Right® Dust Separator

    …flexform hose that connects the Dust Right® Separator to any vacuum with a standard 2-1/4" ID inlet port.* The Dust Right® Separator creates a cyclonic air flow that causes most wood dust particles and other materials that are heavier than air to separate, preventing them from being passed…

    81 Review(s)
    $79.99 $49.99

    SAVE 38%

  2. Dust Right® 4'' Dust Separator Components, with FREE Downloadable Plan!

    Dust Right® 4'' Dust Separator Components, with FREE Downloadable Plan!

    …to empty it as often. The two coupler components fit standard 4" dust hose as well as the Dust Right® Handle system (22643, sold separately). Go to the "Tech Spec" tab for a FREE downloadable plan for a Dust Separator Cabinet, plus instructions to build the Barrel Dust Separator shown above!

    18 Review(s)
    $20.99
  3. Hose Adaptor

    Hose Adaptor

    …and securely hook up a 4" hose directly to tools with a standard 2-1/4" port. Works with most benchtop tools. Technical Details:* Small end is 2-1/4" OD, 2" ID.* Large end is 3-7/8"OD, 3-11/16" ID.* Overall length is 3-1/4" (Large end is 1-5/8" long, small end is 1-1/2" Long, 1/8" separating ridge.)

    4 Review(s)
    $5.99
  4. Laguna Mobile Cyclone 1.5 HP Dust Collector

    Laguna Mobile Cyclone 1.5 HP Dust Collector

    …Cyclone Dust Collector offers the benefits of a cyclone and the portability needed for workshops of all sizes. The cyclone collection unit allows the wood particles and dust to be separated from the air stream before going to the pleated cartridge filter. This provides superior dust collection…

    1 Review(s)
    $999.00
  5. Nordfab Radial Armsaw Hood

    Nordfab Radial Armsaw Hood

    …collecting dust from radial arm saws. For each hood listed below, the given dimension states the diameter of the duct fitting. Note: One Quick-Fit clamp of appropriate diameter is required for every connection within your system. Click here to view the clamp offer (sold separately). This is an…

    From: $181.79
  6. Festool CT Midi Dust Extractor

    Festool CT Midi Dust Extractor

    …* A balance of low weight, small size and container capacity make the MIDI perfect for all-around dust extraction in smaller shops as well as on the job site.* Features more than 99% dust separation efficiency.* Integrated hose garage provides clean, easy storage for hose and cord.* Offers tool…

    2 Review(s)
    $485.00
  7. Bosch Dust Port Hood Kit

    Bosch Dust Port Hood Kit

    Designed to work with the PR011 Plunge Base for the Colt Palm Router (#45145, sold separately). The PR012 Dust Hood Kit eliminates dust at the source for far less mess, and a healthier work environment. The port can be positioned toward or away from the user, and angles upward so it's easy to use…

    $18.99
  8. 4" Spring Hose Clamp, Pack of 5

    4" Spring Hose Clamp, Pack of 5

    …4" Spring Hose Clamps! Made of durable yellow chromate, the clamps have a 1-3/4" long bolt that allows you to tighten any connection, creating a tight seal and eliminating suction loss. Perfect for 4" dust collection hose fittings. Pack of 5. Also available individually (24385, sold separately).

    3 Review(s)
    $4.49
  9. 4" Spring Hose Clamp, Each

    4" Spring Hose Clamp, Each

    …with this 4" Spring Hose Clamp! Made of durable yellow chromate, the clamp has a 1-3/4" long bolt that allows you to tighten any connection, creating a tight seal and eliminating suction loss. Perfect for 4" dust collection hose fittings. Also available in package of 5 (64544, sold separately).

    3 Review(s)
    $0.99
  10. Hose Reducer-Reducers

    Hose Reducer-Reducers

    …down in size by a reducer increases air velocity near the machine where it's needed most. * Available in two sizes.* Shop Vac Adapter (sold separately) works with 2-1/2" Hose. 34654 Shop Vac Adapter Small end has a 2-1/4" outer diameter and a 2" inner diameter. Large end outer diameter is 2-7/16"…

    25 Review(s)
    From: $6.99
  11. Safety Speed Cut Panel Pro 2 Panel Saw

    Safety Speed Cut Panel Pro 2 Panel Saw

    …Quick Stop Angle with Stop (42875): used with upper extensions for easily repeatable cutting* Lower Extensions (42872): add 20" to each side of the material handling fence for cutting even larger panels* Dust Collection Kit (42871): includes a 10' hose, rollers, dust tube, and a steel elbow

    From: $898.99
  12. iVac Pro Switch Wireless Dust Collection Controller System

    iVac Pro Switch Wireless Dust Collection Controller System

    …turning on and off your dust collection system while you're operating a shop tool! The iVac Pro consists of two main components, the Pro Switch and the Pro Tool (Sold Separately), in your choice of 240V or 115V. A complete iVac Pro System gives you wireless control of your dust collection system,…

    $79.99
  13. Powermatic PM1300TX-BK Dust Collector, 1.75HP 1PH 115/230V, 30-Micron Bag Filter Kit

    Powermatic PM1300TX-BK Dust Collector, 1.75HP 1PH 115/230V, 30-Micron Bag Filter Kit

    The PM1300TX Dust Collector features the exclusive TurboCone™, which improves chip separation to prevent clogging of the filter and increases packing efficiency of the collector bag. The cloth filter bag is made of a 30-micron material that aids in the filtration of all but the finest dust

    $599.99
  14. 2-1/2'' Dust Collection Starter Kit

    2-1/2'' Dust Collection Starter Kit

    …and fittings Enhance your system with other 2-1/2"accessories including plastic hangers, fittings, couplings, and clear piping (not included). 2-1/2" hose sold separately. Use 2-1/2" dust hose or #36973 coupler to join lengths of the clear pipe, or to connect clear pipe to other 2-1/2" fittings.

    5 Review(s)
    $36.99
  15. Dust Right® Floor Sweep System

    Dust Right® Floor Sweep System

    …a few 4" spring clamps (sold separately) and hang the entire system on the wall. Patent pending. Features:* Floor Nozzle contains built-in filter grate to keep oversized particles out of your dust collection system.* Dust Right® Handle is compatible with other Dust Right® accessories.* Small…

    47 Review(s)
    $42.99
  16. Clear Dust Hose for Router Table Fence Port

    Clear Dust Hose for Router Table Fence Port

    The 2-1/2" clear dust hose is ideal for connecting to your Dust Right® Router Table Dual Port (20225, sold separately) and the dust port of your router fence. The clear dust hose measures 36" long. Use 2-1/2" Hose Clamps (sold separately) to secure hose to port.

    $10.49 $8.99

    SAVE 14%

  17. Dust Right® Separator Hose Holder

    Dust Right® Separator Hose Holder

    Woodworkers have embraced the Dust Right Separator, but storing the Expandable Dust Right Hose can be tricky. Now you can take full advantage of that hose's incredible shrinking potential with the Hose Holder for the Dust Right Separator! Simply slip the hose over the rod, and what was once a 12'…

    $24.99
  18. Dust Right® Wall Mount Dust Collector

    Dust Right® Wall Mount Dust Collector

    …made from heavy-duty cloth and attach easily. Unit includes one Z-bracket and mounting hardware. Additional Z-brackets sold separately. * 30 micron dust collector bag keeps dust particles in place without sacrificing air flow * Wall mounting bracket with included hardware attaches easily to any wall…

    14 Review(s)
    $249.99
  19. Dust Boot for CNC Shark HD 2.0

    Dust Boot for CNC Shark HD 2.0

    …fits into the dust boot and the other end (2-1/2" O.D.) fits our clear dust hose (22784, also sold separately). Technical Details:* Designed to work with the CNC Shark HD 2.0 (sold separately) See 43651 if you need a dust boot for the other CNC Shark machines.* Dust Boot measures 4-3/8"…

    1 Review(s)
    $89.99
  20. SawStop Contractor Table Saw Job Site Cart

    SawStop Contractor Table Saw Job Site Cart

    Turn your SawStop® Contractor Saw (sold separately) into an ATV with this mobile cart, fully equipped to handle the muddy, rugged conditions present at most any construction site. The sturdy 10" ball bearing wheels make it easy to roll your saw up and down ramps to get into houses and…

    $199.00
  21. 2-1/2'' Swivel Fitting for Shop Vacs

    2-1/2'' Swivel Fitting for Shop Vacs

    …to your shop vac or dust collector and any 2-1/2" hose with Bridge Hose Clamps (sold separately) to make dust collection and shop cleanup more convenient.* Made of durable ABS plastic* The larger OD on the swivel fittings is 2-1/2". This fits inside 2-1/2" standard or Dust Right hoses and then…

    5 Review(s)
    $4.99
  22. Dust Boot for CNC Shark

    Dust Boot for CNC Shark

    …Fitting (31660, sold separately) aids in keeping the dust hose from kinking as the router moves about. Features one end that is 2-1/4" O.D. that fits into the dust boot and the other end (2-1/2" O.D.) fits our clear dust hose (22784, also sold separately). Dust Boot is compatible with…

    2 Review(s)
    $89.99
  23. Jet Vortex Dust Collector 1.5HP w/Canister Filter DC-1100VX-CK

    Jet Vortex Dust Collector 1.5HP w/Canister Filter DC-1100VX-CK

    The JET DC-1100VX features the exclusive Vortex Cone™ which improves chip separation to prevent clogging of the filter, and increases packing efficiency of the collector bag. The high air velocity (CFM) stands up to any competitive specifications, and the industrial controls are designed for…

    3 Review(s)
    $699.99
  24. Bench Dog® ProMaxRT Cast Iron Router Table Top

    Bench Dog® ProMaxRT Cast Iron Router Table Top

    …that will last for generations. Recommended for use with the Rockler Steel Router Cabinet with Dust Bucket (41427, sold separately) or the Rockler Router Table Steel Stand (48426, sold separately). Premium features of the ProMaxRT:* Offers more than five square feet of work surface* Dual-Track…

    3 Review(s)
    $449.99
  • Items 1 - 24 of 164
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X